|
| 1 | Supply & Fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC doundation inculuding the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. |
| 2 | Supply & Fixing of LED Street light Fitting having die coast aluminium body and diffuser with driver set suitable for 75 to 90 watt. Confirming to IP 66 and above Protection complete in all respect. |
| 3 | Wiring wire 1.5sqmm 2 core (Make Havells) |
| 4 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushinon of 75mm thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be proerly connected with the earth conductor by clamps etc. |
| 5 | 25 Sqmm × 3.5 core |
| 6 | 10 Sqmm × 4 core |
| 7 | Supply and burring of safe earthing electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square CI frame with hinged cover & masonry housing (from electrode terminal to switch board, cost of 25 × 3 GI. Strip will be extra) Make : As approved in U.P.P.W.D., & C.P.R.I. Certified |
| 8 | Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. |
| 9 | 25 Sqmm |
| 10 | 10/16 Sqmm |
| 11 | S/B of pole earthing with 20mm die × 2000mm long M/S Rod connected with pole by 6 to 4 swg GI wire complete.As per UPPCL Norm |
| 12 | S/F of HDPE Pipe 4Kg./Cmsq size 63mm die.PSR at Rajghat Bridge file |
| 13 | S/F of HDPE Pipe 2.5Kg./Cmsq size 50mm die.PSR at Rajghat Bridge file |
| 14 | HDD Drilling by manual of mechanical method PSR at Rajghat Bridge file |
| 15 | Supply & crection of overhead line with G.. Wire no. 8 to 4 SWG on poles/serivce bracket including binding etc. complete In all respect. |
| 16 | Supply and layingof 12mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect. |
| 17 | S&F of 6 Amp. To 32 Amp. DP MCB (10KA) C Curve |
| 18 | Extra CC Work as required at site for plinth, foundation for panel etc. as given of 4:2:1 CC Foundation in 2cm stone grit, sand mortars and cement. |
| 19 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN. As directred by E.I. Make - Havells, L&T, Cemenence.40 A TPN |
| 20 | Part B |
| 21 | Supply & fixing of 12.5 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip, heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc complete in all respect |
| 22 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 150 Watt. Confirming to IP 66 protection complete in all respect. (Make - Crompton, Phillips, Bajaj, Hellonix) |
| 23 | Supply and fixing of 6sqmm×4core copper cable Rate based on Police Line Mast file |
| 24 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushinon of 75mm thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be proerly connected with the earth conductor by clamps etc. |
| 25 | 25 Sqmm × 3.5 core |
| 26 | Supply and burring of safe earthing electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square CI frame with hinged cover & masonry housing (from electrode terminal to switch board, cost of 25 × 3 GI. Strip will be extra) Make : As approved in U.P.P.W.D., & C.P.R.I. Certified |
| 27 | Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 25 Sqmm |
| 28 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN. As directred by E.I. Make - Havells, L&T, Cemenence.40 A TPN |
| 29 | S/F of HDPE Pipe 4Kg./Cmsq size 63mm die.PSR at Rajghat Bridge file |
| 30 | HDD Drilling by manual of mechanical method PSR at Rajghat Bridge file |
| 31 | Supply & crection of overhead line with G.. Wire no. 8 to 4 SWG on poles/serivce bracket including binding etc. complete In all respect. |
| 32 | Supply and layingof 12mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect. |
| 33 | Extra CC Work as required at site for plinth, foundation for panel etc. as given of 4:2:1 CC Foundation in 2cm stone grit, sand mortars and cement. Please Enable Macros to View BoQ information |
