|
| 1 | Motor installation work at Thadathil DWSS under Nanmanda GP. |
| 2 | 90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame) |
| 3 | 90.14.24.19:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.4 KVAr, 3 phase, 440 V, delta connected, standard duty Metalised Poly Propylene Capacitor, Box Type, suitable for direct connection to motors. |
| 4 | 90.14.28.15:S & F Motor starters of the following ratingsSubmersible pump controllers with ammeter,TPMCB for three phase 10 to 12.5HP submersible motor pumps (DOL) |
| 5 | 90.14.3.2:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet |
| 6 | 90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG) |
| 7 | 90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG) |
| 8 | 90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) |
| 9 | 90.6.10.3:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required32 mm |
| 10 | 90.6.6.4:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.6 sq mm |
| 11 | 2.1.2:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & N |
| 12 | 2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415volts, residual current circuit breaker (RCCB), having a sensitivity current 30milli Amperes in the existing MCB DB complete with connections, testing andcommissioning etc. as required.40 amps |
| 13 | 1.17.31:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 6 sq. mm |
| 14 | 1.21.4:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.40 mm |
| 15 | OD481536/2025-2026:Dismantling and removing the existing old and rusted three phase panel board, handing over the same to the Municipal/Departmental authorities with proper acknowledgement. |
| 16 | OD481537/2025-2026:Supply and fixing LED indicator |
| 17 | OD481539/2025-2026:Supply, installation testing and commissioning of 7.5 HP vertical open well submersible motor pump set at rated voltage 3 phase 415 V 50 Hz AC supply, Deccan make 7 DIM 9 stage delivery pipe 50 mm in existing open well using suitable tools and plants |
| 18 | OD481541/2025-2026:Supply and fixing 50 mm GI pipe as support for hanging submersible motor pump set in open well. |
| 19 | OD481542/2025-2026:Lifting the damaged existing open well submersible motor pump from well, disconnecting the supply wire, dismantling the delivery pipe and accessories which are not in use and handing over the same to the concerned departmental authorities with proper written acknowledgement. |
| 20 | OD481543/2025-2026:Charges for procurement, preparation and submission of application for availing single phase KSEB service connection with necessary sketch, Test and completion report, stamp fee etc including necessary liaison work as required. |
| 21 | OD481544/2025-2026:Supply and providing suitable iron hook grouted on wall for binding the service wire |
| 22 | OD481545/2025-2026:Supply and installation of dust and vermin proof , 3 phase syntax meter board (GSMB 6535) and to fix KSEB meters , fuse units, CT etc as required including fixing it on the wall , making good the damages colour washing etc as required. |
| 23 | OD481546/2025-2026:Supply and laying 10 mm or nearest size stainless steel rope |
| 24 | OD481547/2025-2026:Supply and laying 12 mm or nearest size nylon rope |
| 25 | OD481548/2025-2026:Supply and providing50 mm full way wheel valve (GM) -zoloto |
| 26 | OD481549/2025-2026:Supply and providing 50 mm NRV (GM)zoloto |
| 27 | OD481550/2025-2026:Supply and providing 50 mm ASTM flange set |
| 28 | OD481551/2025-2026:Supply, Treading, Laying and joining of 50 mm size 80 sedulous ASTM pipe approved make with required specials as delivery pipe using required leak proofing materials etc. as required. |
| 29 | OD481552/2025-2026:Supply and fixing single phasing cum dry run preventer |
| 30 | OD481553/2025-2026:Supply and fixing Digital multifunction meter to read V,A,F,PF -3 phase accuracy class 1 LED |
| 31 | OD481554/2025-2026:Supplying and fixing 63 A HRC fuse with HRC fuse link with connections in existing meter board. |
| 32 | OD481555/2025-2026:Supplying and fixing 63 A,2 way neutral links mounted on DMC/SMC base with connections in existing meter board. |
| 33 | OD481556/2025-2026:Providing and fixing 2 x 25mm x 3mm G.I strip test joint for earthing system |
| 34 | OD481559/2025-2026:Supply and providing 25x3mm brass nut and bolt etc. as required |
| 35 | OD481560/2025-2026:Supply and providing 12x3mm brass nut and bolt etc. as required |
| 36 | OD481561/2025-2026:Supply and fixing 9 watt LED bulb in the existing batten holder as required |
| 37 | 5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 38 | 90.2.1.1:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single Control light point with 6A, plate ceiling rose - Short point |
| 39 | 1.58:Supplying and fixing PVC batten/ angle holder including connection etc. as required. |
| 40 | OD492683/2025-2026:Supply and fixing 50 mm 80 Sch ASTM bend |
| 41 | 90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board |
| 42 | 5.9:Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) Please Enable Macros to View BoQ information |
