|
| 1 | Demolition of RCC chajja and similar suspended work complete all as specified |
| 2 | M &L providing cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) in roof/Chajjas kerb or mud stops, rounded or chamfered as pading concerete including demoltion of cement concrete complete all as specified and directed. |
| 3 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridge fixed with J- hook bolt and nut complete all as specified and as directed. |
| 4 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 5 | S&F pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 6 | S&F rectangular/Square hollow mild steel section as in purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc |
| 7 | Cutting chases, pinning in, stone concrete block or slabs wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth and removal of debris otside of MOD land complete all as specified. |
| 8 | Dismantling of wall and ceiling board and cover fillets complete all as specified & directed by Engineer-in-Charge. |
| 9 | S & F Anodised aluminium snap grid size of grid 605 x 605mm frame work for false ceiling Complete all as Specified. |
| 10 | S&F False ceiling size 595mmx595mm, 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with GI wire of 3mm dia complete all as specified and directed. |
| 11 | S&F readymade 7 feet pulley operated cloth drying system fixed on wall/ceiling, aluminium anodised 22mm outer dia pipe, channel assembly, locking system to hide rope knot, ropes 4 mm dia polyster braided undiyed & fitting material etc including dismantling of old existing cloth drying complete all as specified and directed. Note:- Easy dry or other equivalent make as approved by GE |
| 12 | Taking down steel windows and ventilators of area below 0.5 sqm each incl all fittings including and fixtures and removed from site and and disposed off outside MD land complete all as specified and directed. |
| 13 | Taking down steel windows glazed and gauged with guard bars exc 0.5 sqm and not exc 1 sqm each and inl all fittings and fixtures and removed from site and and disposed off outside MD land complete all as specified and directed. |
| 14 | Taking down steel windows glazed and gauged with guard bars exc 1 sqm and not exc 1.5 sqm each and inl all fittings and fixtures and removed from site and and disposed off outside MD land complete all as specified and directed. |
| 15 | Taking down steel windows glazed and gauged with guard bars exc 1.5 sqm and not exc 2 sqm each and inl all fittings and fixtures and removed from site and and disposed off outside MD land complete all as specified and directed. |
| 16 | Taking down or detaching old MS grill by cutting and refixing in the same location incl. all necessary arrangement and T&P by contractors own arrangement of size exc. 0.5 sqm and not exc. 1 Sqm each with PCC (1:3:6) type C-1 using 20mm graded stone aggregateand incl. all fittings and fixtures and removed from site and disposed off outside MD land after measurement, entry in MB as Sch of credit material and signature by both parties complete all as specified and directed. |
| 17 | Taking down or detaching old MS grill by cutting and refixing in the same location incl. all necessary arrangement and T&P by contractors own arrangement of exc. 1 sqm and not exc. 1.5 Sqm each with PCC (1:3:6) type C-1 using 20mm graded stone aggregateand incl. all fittings and fixtures and removed from site and disposed off outside MD land after measurement, entry in MB as Sch of credit material and signature by both parties complete all as specified and directed. |
| 18 | Taking down or detaching old MS grill by cutting and refixing in the same location incl. all necessary arrangement and T&P by contractors own arrangement of size exc. 1.5 sqm each each with PCC (1:3:6) type C-1 using 20mm graded stone aggregateand incl. all fittings and fixtures and removed from site and disposed off outside MD land after measurement, entry in MB as Sch of credit material and signature by both parties complete all as specified and directed. |
| 19 | M&L for framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikers framed guard bars barred iron doors ladders, framed balusters walk way railing framework of water tanks and similar work confoming to Fe-290 Gde E-165 including scaffolding and safety precautions to fix grills at G+3 storied building complete all as specified and as directed. |
| 20 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard 3 track sliding sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. complete all as specified. |
| 21 | Supply and fixing Powder coated aluminium window shutters, sliding type 3 track aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary locking arrangement and roller etc. complete all as specified |
| 22 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm etc complete all as specified and directed. |
| 23 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n exc 4 Sqm etc complete all as specified and directed. |
| 24 | Taking down of shutter exc 1.0 sqm but n.exc 2.0 Sqm each |
| 25 | Taking down of Shutters of any description n exc 1sq.m each |
| 26 | Taking down of shutter exc 2.0 Sqm each |
| 27 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 28 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other single/double rebate Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 29 | All as per item no 28 above but 65x100mm |
| 30 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm sizecomprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 31 | S&F 30 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides.complete all as specified |
| 32 | S&F Factory made solid panel PVC door shutter wire gauge shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having but wood grain and panel will be of wire gauze in lieu of single side prelam PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretchedto tighten firmly complete all as specified and directed |
| 33 | M&L 18mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work etc complete all as specified and as directed . |
| 34 | S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps (when open) in 30mm complete all as specified. |
| 35 | S & F magnetic catch for cupboard cabinet shutters of approved quality and of suitable size complete all as specified and directed. |
| 36 | S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, bright finished complete all as specified and directed. |
| 37 | M&L for 0.9mm thk Decorative laminate type I of surface finish ,colour and pattern as approved fixed with approved adhesive all as per makers instructions and etc complete all as specified and as direted. |
| 38 | S&F stainless steel 100 mm butt hinges for doors complete all as specified. |
| 39 | S&F 150 mm size extruded aluminium alloy handles fabricated type anodized complete all as specified. |
| 40 | S&F in repair 125 mm size extruded aluminium alloy handles fabricated type with plate anodized complete all as specified. |
| 41 | S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified. |
| 42 | S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy complete all as specified. |
| 43 | S&F for floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 150mm complete all as specified |
| 44 | S&F in repairs mild steel 150 mm helical door springs including roller and roller plate complete (Helical door spring) including welding to steel chowkhats if required all as specified. |
| 45 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 46 | S&F 4mm thick figured glass pin headed type and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified. |
| 47 | S&F in sheet glass ordinary quality 4mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in metal/wooden frame complete all as specified. |
| 48 | S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples incl removal of old wire cloth from steel windows/doors and fixing new wire cloth, new MS pins and refixing of old MS FI beads complete all as specified. |
| 49 | S&F in repairs sheet glass ordinary quality 4mm thick in square exc 0.50 Sqm each pane glazing with oil putty, clip in metal frameand wooden beading in metal frame including hacking out of old broken glass complete all as specified. |
| 50 | S&F in repair 4mm thick figured glass pin headed type and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified. |
| 51 | S&F in repair 25mm dia stainless steel curtain rod complete all as specified |
| 52 | S&F in repair fancy type SS brackets/finials/corner brackets fixed with SS scres complete all as specified |
| 53 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) 'P' or 'S' trap including dismantling of old Water closet complete all as specifed and as directed. |
| 54 | S&F in repairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. and seat cover (excluding flushing cistern & flush pipe) complete in all respect all as specified |
| 55 | S&F plastic water closet seat cover, White, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and as directed. |
| 56 | S&F in repairs plastic water closet seat cover, White, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and as directed. |
| 57 | S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe .complete including making good to floor witcomplete all as specified |
| 58 | S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with inlet ball valve and float including flush pipe, handle, bracket PVC short/long bendetc. complete all as specified and directed |
| 59 | S&F in repair PVC flush pipe 32 mm bore high density for low level flushing cistern including all joints, washers suitable for Indian type/ Pedstal type WC complete all as specified. |
| 60 | Petty repairs to leaking low level or high level flushing cistern by adjusting the float valves, internal fittings and including removal and replacement of rubber washer in PVC siphons, leaking PVC bends/GI pipes etc. complete all specified and directed by Engineer in charge |
| 61 | S&F in repairs PVC internal fittings (ie syphon) for low/high level flushing cistern complete all as specified. |
| 62 | S&F in repairs PVC connection 15 mm size , 60 cm long with PTMT adopter,check nuts and washer on both sides for hot water complete all as specified. |
| 63 | S&F in repair vitreous china wash hand basin, white, flat back size 550 x 400 mm including one number brass CP waste coupling, waste pipe 32 mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed. |
| 64 | S&F in repair 32 mm dia PVC collapsible waste pipe for WHB/Kitchen sink complete all as specified. |
| 65 | S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 66 | S &F in repair vitreous chinaware urinal half stall type white with grating & union for discharge pipe down take pipe etc. |
| 67 | S&F 15 mm bore push taps suitable for urinals any colour of PTMT screwed for iron pipe and including Urinal spreader fixed in repairs (Minium weight 15 mm-47gms).complete all as directed |
| 68 | M&L in repairs 32mm dia Waste coupling, brass, chromium plated for SS Kitchen sinks, WHB etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified. |
| 69 | Cutting chases, pinning in, stone concrete block or slabs wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth and removal of debris otside of MOD land complete all as specified. |
| 70 | S & F in repair of CPVC pipes 25mm Incl. SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 20 mm GI pipe complete all as specified. |
| 71 | S & F in repair of CPVC pipes 20mm all SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 15 mm GI pipe complete all as specified. |
| 72 | S&F of 20 mm dia CPVC brass elbow complete all as specified and as directed. |
| 73 | S&F of 20 mm dia CPVC Brass Tee complete all as specified and as directed. |
| 74 | S&F of 20 mm dia female/male brass threaded adapter complete all as specified and as directed. |
| 75 | S&F of 15 mm CP extension nipple complete all as specified and as directed. |
| 76 | Cleaning of air lock in GI/CPVC/UPVC pipe 15/20/25 mm and making the water supply available upto water taps including taking down and refixing of pipes attending the complaints of no water supply & rectifying defects in water supply lines complete all as specified. |
| 77 | S & F in repair PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed to walls fixed with PVC straps or clips including dismantling and breaking of pipe and fittings complete all as specified and as directed. |
| 78 | S&F in repair PVC (SWR) pipes 75 mm size in bore single socketed , in any length with rubber ring joints, fixed to walls fixed with PVC straps or clips including dismantling and breaking of pipe and fittings complete all as specified and as directed. |
| 79 | S&F in repair PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints laid in floors including dismantling and breaking of pipe and fittings complete all as specified and as directed. |
| 80 | S&F in repair PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints laid in floors including dismantling and breaking of pipe and fittings complete all as specified and as directed. |
| 81 | S&F in repair PVC bends any radius 75mm dia |
| 82 | S& F in repair PVC bends any radius 110mm dia |
| 83 | S& F in repair PVC bends with Access Door 75mm dia |
| 84 | S& F in repair PVC bends with Access Door 110mm dia |
| 85 | S& F in repair PVC Single \\"Y' Junction 75mm dia |
| 86 | S& F in repair PVC Single \\"T' Junction 110mm dia |
| 87 | S& F in repair PVC Single \\"T' Junction with Access Door 110mm dia |
| 88 | S&F in repairs bib tap cast copper alloy 15mm fancy type , Chromium plated screwed down, high pressure, with capstan head , screwed down screwed for iron pipe. |
| 89 | S&F in repairs 15mm bore dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm-125gms). |
| 90 | S&F in repair, bib taps, brass, fancy type, long body, chromium plated for 15 mm bore pipe or for brass ferrule or to GI socket complete all as specified and directed. |
| 91 | S&F in repair 15 mm bore diameter brass CP two way bib taps with crutch or butterfly handle,screwed down,screwed for pipe or for brass ferrule. |
| 92 | S&F in repair 15 mm bore diameter brass CP wall mixture any type complete all as specified and as directed. |
| 93 | S&F in repair pillar taps, brass, with capston heads, fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed in repair, complete all as specified and directed. |
| 94 | S & F in repair pillar tap swan neck fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed in repair, complete all as specified and directed. |
| 95 | S&F in repairs stop valves 15 mm nominal bore, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete, fixed in repairs, all as specified and directed . |
| 96 | S&F in repairs angle valves 15 mm nominal bore, brass, chromium plated, complete, fixed in repairs, all as specified and directed . |
| 97 | S&F in repair brass spindle for pillar taps, stop valves, bib taps, angle valves, concealed stop cocks & wall mixer cock for 15mm by changing jumper valves, washers etc complete all as specified |
| 98 | S&F in repairs shower rose 15mm of brass chromium plated 125 mm dia round with shower arm of 190mm Long Light Body complete all as specified and directed. |
| 99 | S&F,in repairs 15mm size health faucet, ABS body , with wall hook and 1 metre stainless steel braided rubber hose pipe complete all as specified and as directed. |
| 100 | S&F in repairs brass chromium plated grating 125 mm dia circular with centre hole/ without hole of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified. |
| 101 | S&F in repairs 100mm dia PVC (SWR) floor/Nahani trap, plain with grating including solvent cement complete all as specified and as directed. |
| 102 | S&F in repairs 75mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and as directed. |
| 103 | S&F Mirror cabinate of size 300mmx450mm mirror of selected quality fixed in wall screws complete all as specified and directed. |
| 104 | S & F in repairs beveled edge looking mirror of 5.5 mm thick 600mmx450mm of selected quality mounted on 6 mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed. |
| 105 | S&F in repairs Glass corner shelf including CP railing, radius 300 mm complete all as specified and directed by the Engr-in-Charge, fixed in repairs. |
| 106 | S&F in repair tubular towel rail 600 mm long of brass chromium plated 20 mm dia D type 60 cm long fixed with two plugs (gutties) of 2nd class hard wood embedded in cement mortar 1:3 with MS screws complete all as specified. |
| 107 | S&F in repairs Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. |
| 108 | S&F in repairs SS soap dish 100mm Complete all as specified and directed.\\" |
| 109 | S&F in repairs SS Towel ring 150 mm Complete all as specified and directed.\\" |
| 110 | S&F in repairs kitchen plate rack made of stainless steel 1mm thick complete size 1200 x 900mm x 200mm width of trade pattern complete all as specified. |
| 111 | S&F 1000 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position including dismatling and removing to store all as specified |
| 112 | S&F 500 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position including dismatling and removing to store all as specified |
| 113 | S&F Tank union 25mm internal dia complete all as specified and as directed |
| 114 | S&F 25 mm internal bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete, fixed in repairs, all as specified. |
| 115 | S&F 25 mm internal bore nipple suitable for HDPE water tank. (Min wt 45 gms). |
| 116 | S&F in repairs HDPE PVC lid (cover) for 500 ltrs/1000 ltrs capacity PVC tank complete all as specified. |
| 117 | Materials and labour for cleaning of water tanks of capacity exceeding 250 litres and not exceeding 500 litres including cleaning of bottom and internal surfaces by brushing with nylon brush, removing all deposits/ scales, silt /other sticky or foreign materials from adhering surfaces and washing inside surfaces of water tanks with approved quality of bleaching powder solution and finally re cleaning with fresh plain water thoroughly to remove all the trace of bleaching powder and draining out the collected water including writing date of cleaning on water tanks with enamel paint complete all as directed. |
| 118 | Materials and labour for cleaning of water tanks of capacity exceeding 500 litres and not exceeding 1000 litres including cleaning of bottom and internal surfaces by brushing with nylon brush, removing all deposits/ scales, silt /other sticky or foreign materials from adhering surfaces and washing inside surfaces of water tanks with approved quality of bleaching powder solution and finally re cleaning with fresh plain water thoroughly to remove all the trace of bleaching powder and draining out the collected water including writing date of cleaning on water tanks with enamel paint complete all as directed. |
| 119 | Materials and labour for cleaning of water tanks of capacity exceeding 1000 litres and not exceeding 2000 litres including cleaning of bottom and internal surfaces by brushing with nylon brush, removing all deposits/ scales, silt /other sticky or foreign materials from adhering surfaces and washing inside surfaces of water tanks with approved quality of bleaching powder solution and finally re cleaning with fresh plain water thoroughly to remove all the trace of bleaching powder and draining out the collected water including writing date of cleaning on water tanks with enamel paint complete all as directed. |
| 120 | M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 121 | M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zincchrome primer complete all as specified and as directed. |
| 122 | Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed. |
| 123 | M&L for pre-cast cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 after demolition of old existing damaged .brick work complete all as specified and as directed |
| 124 | M&L for rendering 10mm thick in CM 1:6 on fair face of brick or concrete surfaces of walls finished even and fair Including taking down, raking out joints, hacking for key, scrubbing down with water etc and removing rubbish of the premises and applying two coats of oil emulsion distemper over a coat of 1mm thick wall care putty after preparation of surface complete all as specified and as directed. |
| 125 | Dismantling of old water proofing treatment and roof tiling including screed bed and cleaning the surface with wire brushes removing dust, foreign material and rubbish off the same out side the MD land complete all as specified and as directed. |
| 126 | M&L for 10 mm thick screed bed or bedding layer in cement mortar 1:4 on floor/roof /Chajjas surfaces mixed with WPC @ 200 ml per bag of cement finished the surfaces even and fair all as specified and as directed.(WPC will be measured and paid separetly) |
| 127 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 128 | M&L for cleaning the plastered/concrete surfaces of roof with wire brushes and applying water proofing treatment as under:(a) Apply bitumen primer at the rate of 0.27 litre per Sqm as per IS 3384-1986 and bonding bitumen of VG-10 @1.20 Kg per Sqm.(b) APP modified water proofing memebrane as per IS 16540/16532-2017 3mm thick and weighing not less than 3.80 kg per Sqm reinforce polyster/HMHDPE matt black finish over compatible primer/bonding bitumen and finish the top surface with bituminus aluminium paint @0.10 Ltr per Sqm. Please Enable Macros to View BoQ information |
