|
| 1 | M&L Surface excavation of soft soil n. exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out Complete all as specified and directed. |
| 2 | M&L for excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/Loose soil Complete all as specified and directed. |
| 3 | M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.in soft/Loose soil Complete all as specified and directed. |
| 4 | M&L for removing excavated material/soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 5 | M&L for cement concrete 1:4:8 type D-2 (40mm Graded aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 6 | M&L for brickwork with subclass ‘B’ old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 7 | M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:4 is to be finished even and smooth with water proofing compound (without using extra lime or cement) complete all as specified and directed. |
| 8 | M&L for preparing new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistance primer complete all as specified and directed. |
| 9 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 10 | M&L for preparing new plastered surfaces of wall and applying two coats of distemper oil emulsion over chalk whiting, white or tinted complete all as specified and directed. |
| 11 | M&L for mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed. |
| 12 | M&L for preparing new surfaces of steel of any description, over 10cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 13 | M&L Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 14 | M&L for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 15 | S&F 6mm thick E board (classic) of size 610x610mm as in false ceiling fixed with aluminium snap grid frame work of same size as aluminium Tee of size 25x25x1.50mm ar main runner 25x25x1.25mm, thick aluminium Tee as cross runner and aluminium angle of size 25x25x 1.25mm, at the perimeter including GI 6mm aluminium suspender of required length of any description complete all as specified and directed. |
| 16 | M&L 75mm thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in plinth protection complete all as specified and directed. |
| 17 | M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. |
| 18 | M&L for hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 19 | M&L for 75 mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base of floor complete all as specified and directed. |
| 20 | M&L for 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub base of floor complete all as specified and directed. |
| 21 | M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 22 | M&L Formwork to sides and soffits of floor or roof beams, beam haunching’s, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed. |
| 23 | M&L Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed. |
| 24 | M&L RCC M-25 in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 25 | M&L RCC M-25 in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 26 | M&L RCC M-25 in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 27 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 28 | M&L foe mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 29 | M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 30 | M&L Glazed ceramic coloured tiles (Designer) in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 backing coat for fixing wall tiles complete all as specified and directed. |
| 31 | M&L 15mm GI steel Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 32 | M&L 20mm GI steel Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 33 | S&F 15mm dia chromium plated fancy type bib taps (Two way), cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 34 | S&F 15mm dia Brass CP Basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 35 | S&F 15mm dia chromium plated fancy type concealed Stop valves/angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 36 | S&F stainless steel Soap dish, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 37 | S&F 10 litres, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets |
| 38 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 39 | S&F Vitreous China wash down water closet pan (pedestal pattern), white, (excluding flushing cistern and flush pipe) including seat and cover fixing bolts complete all as specified and directed. |
| 40 | M&L for mild steel rolled mild steel in Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc Fe 410-W (Gde- E- 250) quality-A. complete all as specified and directed. |
| 41 | S&F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 42 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed. |
| 43 | S&F PVC (SWR) pipes110mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 44 | S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 45 | S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 46 | S&F 600mmx450mm size bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 47 | S&F PVC (SWR) bend 110mm dia Any radius complete all as specified and directed. |
| 48 | Supply & fixing 1000 liter capacity ISI marked double layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including making inlet/outlet connection complete all as specified and directed. |
| 49 | S&F ball valve 20mm bore high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed, (minimum weight 210 gms) complete all as specified and directed. |
| 50 | S & F gun-metal, globe or gate valves of 20mm thick, with iron wheel head, screwed both ends for iron pipe and fixed etc complete all as specified and directed. |
| 51 | S & F gun-metal, globe or gate valves of 15mm thick, with iron wheel head, screwed both ends for iron pipe and fixed etc complete all as specified and directed. |
| 52 | S&F PVC (SWR) 75mm outlet dia floor trap/Nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 53 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 54 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 55 | S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 56 | S&F Aluminium handles 100mm long, cast type, anodised complete all as specified and directed. |
| 57 | S&F Aluminium anodised, barrel tower bolts 150mm of extruded section and fixed complete all as specified and directed. |
| 58 | M&L 2nd class soft wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 59 | M&L for mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 60 | M&L for cement concrete 1:3:6 type C-1, using 20mm graded stone aggregate as bed block to hold fast or similar work complete all as specified and directed. |
| 61 | S&F 30mm thick glazed and skeleton shutters for window & ventilator open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred brads for securing glass etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.24 (b) in 2nd class soft wood complete all as specified and directed. |
| 62 | S&F Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 63 | S&F Sheet glass, 3mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 64 | M&L for applying two coats of synthetic enamel on wood (ordinary tint) over one coat of pink primer over 10cm width or girth including preparation of new surface complete all as specified and directed.. |
| 65 | S & F aluminium alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast or extruded section and fixing bolts of extruded section or cast aluminium alloy 250 mm size complete all as specified and directed. |
| 66 | M&L 100 mm thick Cement concrete Type B-1, 1:2:4 (20mm graded aggregate) as in flooring complete all as specified and directed. |
| 67 | M&L Weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified and directed. |
| 68 | S & F vitreous China wash basin with pedestal , white, flat back, size 550 x 400 mm including one no 15mm bore fancy type mixer taps with hot & cold, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipe, one No PVC waste pipe 25 mm dia and 75 cm long with 32 mm dia connector, 32mm size waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange end, bedded in red lead cement and other fixed complete including cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed. |
| 69 | S&F vitreous China urinals, full stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, urinal spreader, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed. |
| 70 | M&L for PVC (SWR) vent cowl for 75 mm dia all as specified complete all as specified and directed. |
| 71 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 72 | Demolition of Concrete of any description and in any position not otherwise specifically provided complete all as specified and directed |
| 73 | M&L Cement concrete type D-2,1:2:4 (40mm graded aggregate) in surface channel Complete all as specified and directed. |
| 74 | Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 75 | M&L for precast Reinforced cement concrete type B1 1:2:4 cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed. |
| 76 | M&L for dewatering/pumping/bailing out contaminated with waste material sludge from septic tank/Drain along with inlet outlet chamber of any capacity/depth by vehicle mounted sewage suction machine and disposing same out of cantonment area in a closed container including taking off manhole cover and putting back the same after cleaning./removing the liquid waste material of septic tanks and cutting hole through slab/ wall where required for inserting pipe and making good the same with cement mortar to match with existing surface to make hygienically fit, writing the date of cleaning of septic tank with black and white paint of size 150x 200 mm and finally spraying unslaked lime (bleaching powder) dry around and over the septic tank/Drain all as directed and to the entire satisfaction of GE. |
| 77 | M&L Cement concrete 1:4:8 Type D2 (40mm Graded aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 78 | Material and labour point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, and 1.5 sqmm nominal cross sectional area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly with and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0mm thick hylam sheet cover fixed with brass screw complete with all accessories for on light point/ Fan point controlled by one, 1-Way switch complete all as specified and directed. |
| 79 | All as per item No 78 mentioned here-in- above but one 5 pin 5 Amps socket out let on independent board with 1.5 sq mm PVC insulated copper conductor for continuous earthing. |
| 80 | All as per item No 78 mentioned here-in- before but 6 pin15 Amps socket outlet on independent board with 4 sq mm PVC insulated and sheathed copper conductor with 4 sq mm PVC insulated copper conductor single core for continuous earthing complete. |
| 81 | S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed. |
| 82 | M & L for Switch socket combination 2 in 1, 3 pin, 6 Amps flush type complete all as directed. |
| 83 | M & L for Switch socket combination 5 in 1, 3 pin, 6 Amp and 16 Amps flush type universal complete all as directed. |
| 84 | Supply and fix, water heater storage type, electric capacity 25 ltr along with all accessories BEE 5 star rated complete all as specified and directed. |
| 85 | M & L for ceiling rose, PVC/Polycarbonate three terminals complete all as directed. |
| 86 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 87 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 88 | S & F in replacement LED light fitting 1x9W/10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 89 | S & F of exhaust fan 250 mm Sweep with louver shutters, plastic exhaust fan AC 230V, 50 Hz complete with fixing arrangement and connection complete all as specified and directed. |
| 90 | Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. |
| 91 | S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series complete all as specified and directed. |
| 92 | S&F MCB single pole & neutral 40 to 63 Amps 230 Volts 'C' series, 10 KA complete all as specified and directed. |
| 93 | S&F 1100 volt grade heavy duty cable PVC insulated multistranded aluminium stranded conductor served with PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension ire one twin core flat cable of circular of size 16 sqmm complete all as specified and directed. |
| 94 | M&L earthing complete with galvanised earthy plate electrode 600 x 600 x 6 mm thick buried directly in ground ( earth pit not less than 2.25 m deep below normal ground level ) with top edge of the plate not less than 1.5 meter below normal ground level, the earth plate surrounded by a mixture of charcoal dust and salt to a packed thickness of 150 mm on all sides with and including necessary excavation earth work returning, filling in and removal of surplus soil upto 50 mtr including GI wire 4 mm dia bolted and riveted to earth plate at one end in and connected to continuous GI earth wire encased in and including 15 mm GI light grade pipe with all fittings from top edge of earth plate complete as specified and as shown in electrical plate no 5 |
| 95 | Supply & Fix 35/45 Watts LED luminaries bldg security light, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium flood light with high power LEDs as light source with IP 66 protection and including driver unit etc complete all as specified and directed. |
| 96 | M&L for Cutting of existing steel tubing for alteration or additions and insertion of Tee 20x20x20mm, union, socket complete all as specified and directed. |
| 97 | S&F GI water tubing 20mm bore 'medium grade', galvanized, with all fittings like socket, union, elbow, bend, tees etc jointed complete all as specified and directed. |
| 98 | S&F gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of bore of 25mm complete all as specified and directed by Engr-in-Charge. |
| 99 | M&L for sand cushioning to underground cables 8 cm below the cable before laying and 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Part-I, complete all as specified and directed. |
| 100 | Material and labour for kiln burnt Sub class 'B' bricks laid dry, flat, width wise along the length of cable in trenches after sand cushioning for protection of under ground cable complete all as specified and directed. |
| 101 | Taking down the unserviceable ACSR conductor any size complete all as specified and directed. |
| 102 | S & F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, 3.5 core 95 sqmm cross sectional area in trenches or walls complete all as specified and as directed |
| 103 | All as per item No. 102 above 3.5 core 35 Sqmm |
| 104 | All as per item No. 102 above 3.5 core 25 Sqmm . Note: for SI Nos 1021 to 104 : Excavation & Earth work sand cushioning GI Pipe and brick for cable protection will be measured and paid separately. |
| 105 | Supply, assembly, erection, testing and commissioning with replacement and taking down old one of Electrical panel cubical outdoor type powder coated with 8 / 7 tank process suitable for operation on 3-phase + N + E, 415V, 50 Hz, AC with internal arc containment, internally pre-wired with copper conductor factory fabricated as per CPRI approved make specified in CA, floor mounted free standing made out of 3.15mm thick CRCA sheet, and shall be compartmentalised with rubber gasketed hinged door having front and rear opening for installation of separate cable alleys, bus bar chamber and switch gear compartments, dust and vermin proof duly powder coated with aluminium bus bars 800A capacity for phases and neutral, set of three LED indicating lamps with base, air ventilation to be provided for heat dissipation, suitable sized knock out holes for cable glands shall be provided, with and including provision of the following switch gears, including suitable size of necessary PCC (1 : 3 : 6) type C2 as in foundation complete all as specified and directed. |
| 106 | a) Aluminium Bus bar 400 Amps capacity TPN, full for phase and neutral with colour code PVC sleeves. - 01 Job |
| 107 | b) LED RYB indicating lamps – 01 set |
| 108 | c) LED Ammeter and voltmeter with necessary CTs and display of required rating . |
| 109 | d) MCCB 250Amp, 36KA TPN, 415 Volts - 1 Nos (Incomer) |
| 110 | e) MCCB 100Amp, 16 KA TPN, 415 Volts - 02 Nos (Out going) |
| 111 | f) MCCB 63 Amp, 16 KA TPN, 415 Volts - 03 Nos (Out going) |
| 112 | g) ON Load Change Over Switch 415 Volt 4 Pole, cap 250 Amp -01 Nos |
| 113 | h) Panel wiring with PVC Insulated un sheathed single core, 1100 Volts grade cable with copper conductor, multi stranded of suitable size. - 01 Job |
| 114 | j) Interconnection of busbar with MCCB, contactor with suitable size aluminium strip - 01 Job |
| 115 | k) Provisioning of cable glands and cable lugs for all incoming and out going cables & connecting the earthing to an earthing test point to main switch board as specified and testing on completion complete all as specified & directed. - 1 Job |
| 116 | Supply, installation, testing & commissioning with replacement and taking down old one of CPRI approved LT Feeder Pillar Box, outdoor type, double door, front and back door openable type with dust vermin proof made out of CRCA sheet 3.15mm thickness, suitable for operation on 415V, 50 Hz, 3 Phase AC supply confirming to IP-65 including suitable size of 4 pole aluminium bus bar of capacity 300 Amps complete with frame made out of angle iron of size 40x40x6 mm for mounting of panel 45cm above ground level, ground level, grouting by providing PCC 1:3:6 type C1 , using 20mm grade crushed stone aggregate powder coated having thickness not less than 100 microns including seven tank process suitable for and including the following :- (a) MCCB 4 Pole 100 Amp, 16 KA-01 No. (b) Copper Busbar Capacity 200 Amp - 1 Set (c) MCB SPN -03 No (d) Phase Indicator -01 each |
| 117 | Supply and fix LT Straight through joint heat shrinkable 1100 volts, 25 sqmm to 50 sqmm including dismantling the existing unserviceable complete all as specified and directed. |
| 118 | Supply and fix LT Straight through joint heat shrinkable 1100 Volts, 50 sqmm to 95 sqmm including dismantling the existing unserviceable complete all as specified and directed. |
| 119 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sq. mm nominal cross section in service connections complete all as specified and directed. |
| 120 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm nominal cross section in service connections complete all as specified and directed. |
| 121 | M&L for Rubber mat of 1 meter x 2 meter x 10 mm complete all as specified and directed. Please Enable Macros to View BoQ information |
