|
| 1 | NS Item -EPDMProviding and laying 16mm thick EPDM rubber flooring, comprising of 10mm thick Rubber buffing and EPDM Granules of 6mm on cleaned Cement concrete base including binder, thinner and all required equipment, transportation of material etc. Complete in all respect and as per engineer in charge. |
| 2 | NS Item -Ornamental Canopy and base complete in all respect with 06 nos. ornamental design FRP Moulded pillar base pedstal with vertical fitter design having base width of size 260mm x 260mm and height 900mm having 04 nos. and size 20mm drilled in the base with holed fasts and B class pipe of size 88mm and height 2890mm, the central M.S. pipe hose FRP moulded TAJ 06 nos. of size 260 x 260 x 210 mm high suitably mounted at appropriate height complete as per design. Complete pillar suitably grinded and subsquently spray painted with two coats of P.U. paint and required shed(ii) 12 nos. spndred and 06 nos. Frizes Floral and Ornate decorative design combination of spandrel and frieze matched to be suspended b/w two MS pillar as per the design. The spandrel (L- bracket) having length of 420 mm and height 400 mm the Friezes (top panel) height 250mm and length as per the size of the gazebo. The Frieze mounted on MS tubular pipe frame of size 50mm x 25mm, Frieze properlly welded to the column pillar at either ends. Complete sets of Spanerel and Friezes uniformlly grinded spray primered spray painted with P.U. paints |
| 3 | NS Item -WHEELCHAIRProviding and supplying standard manual wheelchair made of high-quality powdercoated/mild steel tubular frame with durable, corrosion-resistant finish. The wheelchair shallbe foldable type for easy storage and portability. Technical Specifications:Frame: Mild Steel/Aluminum, powder-coated finishSeat Width: Approx. 18 inches (450 mm), made of durable, washable canvas or PVCupholsteryBackrest: Fixed/Foldable with reinforced supportWheels: Rear wheels: 24` solid rubber with hand rims for self- propellingFront wheels: 8` PU/solid rubber caster wheels Brakes: Manual parking brakes on both rear wheelsFootrests: Foldable/Detachable, height-adjustable with heel support strapArmrests: Fixed or flip-up cushioned armrests Load Capacity: Minimum 100 kgFoldable Design: For convenient storage and transportation Warranty: Minimum 1 year against manufacturing defect |
| 4 | NS Item -SIT `N` SNICKER SWING, Main Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS 1239 Minimum 90 mmouter diameter (OD), 2.0–3.0 mm thickness Surface Finish Zinc primer plus outdoor-gradepolyester powder coating (min. 60–80 microns), Bending with fully automatic Pipe BendingMachine, Welding With Laser Welding Heigh Power Machine., Bending with fully automaticPipe Bending Machine, Welding With Laser Welding Heigh Power Machine.Support Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS 1239 Minimum 40 mmouter diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-gradepolyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe BendingMachine, Welding With Laser Welding Heigh Power Machine., Bending with fully automaticPipe Bending Machine, Welding With Laser Welding Heigh Power Machine.Wheel Chair Safety Door: CR sheet (1.6-2.0 mm thick)Manufacturing: CNC laser-cut withanti-slip perforated texture Finish: Hot-dip galvanized plus powder coating Load Capacity:Minimum 150 kg per platform.Swing Base Material: Checker Sheet 3mm Process with CNC Laser Machine, Surface FinishZinc primer outdoor-grade polyester powder coating (min. 60- 80 microns), Bending with fullyautomatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.,Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding HeighPower Machine. |
| 5 | NS Item -PLAYFUL PANELMain Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 114 mmouter diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-gradepolyester powder coating (min. 60–80 microns), Bending with fully automatic Pipe BendingMachine, Welding With Laser Welding Heigh Power Machine., Bending with fully automaticPipe Bending Machine, Welding With Laser Welding Heigh Power Machine.Play panel designed for outdoor playgrounds. Crafted from durable 3 layer HDPE sheets 20mm thik and precision router-cut for engaging graphics through play.Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Naturalanodized or powder coated Properties: Anti-rust, tamper- resistant, non-toxic.Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts RustResistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposed bolts. |
| 6 | NS Item -CHEERFUL CHURNMain Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.Support Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS 1239 Minimum 40 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor- grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automaticPipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Wheel Chair Safety Door: CR sheet (1.6-2.0 mm thick) Manufacturing: CNC laser-cut with anti-slip perforated texture Finish: Hot-dip galvanized plus powder coating Load Capacity: Minimum 150 kg per platform.mgr Base Material: Checker Sheet 3mm Process with CNC Laser Machine, Surface Finish Zinc primer outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine Car Shaped Side Panel: designed to provide shade and aesthetic appeal to playground structures. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut. Pins: are made up of M.S bright bar.Bearing bushes: 089mm OD seamless pipe.Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic.Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposed bolts. Surface Coating Primer: Epoxy zinc-rich primer (40 microns) Top Coat: Outdoor polyester powder (60-80 microns) Adhesion: 5B rating (ASTM D3359) Color Options: Custom RAL shades, UV-stabilizedSafety Compliance Standards: EN 1176 (Europe) ASTM F1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing (optional): Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges.Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. |
| 7 | NS Item -ARM REVOLVE ASSISTMain Frame: 0114 *3 mm thick M.S pipe and subordinate tube is of 088*3.0 large thickness M.S pipe. Handle: is made of 088 3 mm thick Pipe and 025 mm round M.S bright bar in bending design. All remaining frame is made by 088 *3mm thick MS pipe. Weight plates: Rubberized moulding round weight plates are used. Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild stee!048 D!A pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations. Bearing: Lubricated high grade6305`2RS`steel ball bearing. Base plate: is OD166, ID 116, and 6 mm thick. Pins: are made up of M.S bright bar Bearing bushes: 075mm OD seamless pipe. Weight plate mounting pipe is of 048 mm MS pipe. Seat Frame: made up of hard chrome plated mild steel 48 DIA round pipe. Hardware All hardware`s uses button heads bolts and nuts made up of high tensile steel.Hand grips: Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long endurance. Closing caps: are of PP/NYLON/HDPE materia!. Laser cutting: profiles of 6mm and 4mm thick M.S sheet are used for connecting subordinates with each other. Rubber: Safety base pads. Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting handles for noise less operations Powders Coating. All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination.Safety Instructions and Exercise chart on machine - start and finish position chart stick on |
| 8 | NS Item -MERRY-GO-ADAPTMain Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer outdoor grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine, Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Support Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 40 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60- 80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine... Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Wheel Chair Safety Door: CR sheet (1.6-2.0 mm thick) Manufacturing: CNC laser-cut with anti-slip perforated texture Finish: Hot-dip galvanized powder coating Lead Capacity: Minimum 150 kg per platform. mgr Base Material: Checker Sheet 3mm Process with CNC Laser Machine, Surface Finish Zine primer outdoor-grade polyester powder coating (min. 60- 80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine, Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Car Shaped Side Panel: designed to provide shade and aesthetic appeal to playground structures. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut Pins: are made up of M.S bright bar. Bearing bushes: 089mm OD seamless pipe. Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic. Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper- proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposedbolts.Surface Coating Primer: Epoxy zine-rich primer (40 microns)Top Coat: Ourdoor polyester powder (60-80 microns) Adhesion: 5B rating (ASTM D3359) Color Options: Custom RAL shades, UV-stabilized Safety Compliance Standards: EN 1176 (Europe) ASTM F1487 (USA) Fall Height: Compliant up to 2.5 meters Surfacing (optional): Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges.Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. |
| 9 | NS Item -XOXO PANELMain Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS 1239 Minimum 114 mmouter diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-gradepolyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe BendingMachine, Welding With Laser Welding Heigh Power Machine., Bending with fully automaticPipe Bending Machine, Welding With Laser Welding Heigh Power Machine.Play panel LLDPE (Linear Low-Density Polyethylene), roto- moulded Thickness: 6-8 mm wall33.00 thickness. Finish Seamless, anti-static, smooth surface UV Resistance.Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Naturalanodized or powder coated Properties: Anti-rust, tamper- resistant, non-toxic.Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts RustResistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposed bolts. |
| 10 | NS Item -Sea-SawMain Structure Material: Galvanised Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating(min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.Handle and Leg rest Material: Galvanised Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 25 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating(min. 60-80 microns), Bending with fullyA. automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.Seat: designed for outdoor playgrounds. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut for Spring: Heavy-duty coil spring. High-carbon steel or alloy spring steel, 18 mm 20 mm wire thickness, Coil height: Approx. 300 mm. Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non- toxic. Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposed bolts.Surface Coating Primer: Shot Blasting surface treatment process using high velocity, steel abrasive Epoxy zinc-rich primer (40 microns) Top Coat: Outdoor polyester powder (60- 80 microns) Adhesion: 5B rating (ASTM D3359) Color Options: Custom RAL shades, UV-stabilizedSafety Compliance Standards: EN 1176 (Europe) ASTM F1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing (optional). Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges.Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. |
| 11 | HSR Item 6.39.1-Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. 1. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).HSR Rate(Rs.) 4135.00 Through Rate |
| 12 | HSR Item 4.12.1-Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer- in-charge. 1. All kinds of soilHSR Rate(Rs.) 78.00 Through Rate |
| 13 | HSR Item 11.67.1-Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : 1. Water thinnable cement primerHSR Rate(Rs.) 22.00 Through Rate |
| 14 | HSR Item 13.19-Providing and fixing galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire0.63 mm fixed on steel windows of standard rolled steel section, with 3 mm thick MS flat iron cover moulding of 12.5 mm width, fixed with machine screws welded complete in all respects. 0 0 0HSR Rate(Rs.) 649.00 Through Rate |
| 15 | HSR Item 11.68.3-Applying priming coat: 3. With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel worksHSR Rate(Rs.) 19.00 Through Rate |
| 16 | HSR Item 11.78-Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.HSR Rate(Rs.) 31.00 Through Rate |
| 17 | HSR Item 11.71.1-Wall painting on a cement plaster surface with acrylic emulsion paint of approved brand and manufacture to give an even shade : 1. Two or more coats on new workHSR Rate(Rs.) 54.00 Through Rate |
| 18 | HSR Item 6.1.1-Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 1. 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)HSR Rate(Rs.) 3975.00 Through Rate |
| 19 | HSR Item 13.29.2-Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 2. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar worksHSR Rate(Rs.) 83.00 Through Rate |
| 20 | HSR Item 26.213-Providing and Displaying Marigold Jaffri French orange/yellow/Russet colour well developed with fresh and healthy foliage with 60 to 75 flowers in bloom specimen plant 60 to 75 cm ht in 30 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.HSR Rate(Rs.) 121.00 Through Rate |
| 21 | HSR Item 26.484-Providing and stacking of Nerium oleander (kaner) dwarf of height 30-40 cm. in earthen pot of size 20 cm as per direction of the officer-in-charge.HSR Rate(Rs.) 46.00 Through Rate |
| 22 | HSR Item 17.5.3-Compacting Original Ground 3. Compaction of EarthworkCompaction of & preparation of sub grade including loosening, levelling of earth 225 mm thick top layer, rough dressing of soil, final dressing of earth to give level, camber, watering, rolling with road roller, compacting the bed to achieve minimum dry density as given in the Table 3000-2 as per technical clause 305 of MORT&H specificationsHSR Rate(Rs.) 7.00 Through Rate |
| 23 | HSR Item 10.30.1-Providing and laying of chequered precast cement concrete tiles 22 mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). 1. Light shade pigment using white cementHSR Rate(Rs.) 855.00 Through Rate |
| 24 | HSR Item 10.107-Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes and patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in- Charge. 0 0 0HSR Rate(Rs.) 1605.00 Through Rate |
| 25 | HSR Item 34.8.2-Informatory sign board 800x600 rectangular as per IRC 67- 2012 with retro reflective Sheeting as per ASTM D 4956 09 and as per IRC 67 2012 fixed over 4 mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.75m for vertical post complete as per clause 801 of MORTandH specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting and a certified copy of test reports from an independent test laboratory including three year outdoor weathering test report for sheeting tested in India condition conforming to clause 6.7 of IRC 67-2012 2. Using high intensity Microprisomatic grade retro reflective Sheeting Class B as per IRC 67 2012HSR Rate(Rs.) 3882.00 Through Rate |
| 26 | HSR Item 34.57-Retro Reflective Printed Sign Board Facia with 10 year warranty Design, manufacturing and assembly of retro reflective sign face (measured in Sq. or rectangular shape) made from micro prismatic Type XI sheeting as per ASTM D-4956-09 pasted on 4mm thick ACP/ ACM. Special Inks used for printing letters/ legends/ directions/ theme shall be certified for low volatile organic compound emission & shall be water based ink (non solvent & non eco solvent ink) with durability of 10 years atleast. The reflective sheeting signage facia shall be covered with ultra voilet overlaminate transparant film. The signage facia shall be warranted for 10 years as per IRC 67 and shall be supplied with government test report of 3 year outdoor weathering test conducted in India condition on base reflective sheeting as per IRC 67- 2012.HSR Rate(Rs.) 7304.00 Through Rate |
| 27 | HSR Item 26.58.2-Supply and installation of garden bench 2. Rectangular garden bench with h-shaped sides made of reinforced concrete (M30), thickness 100 mm, back height 750 mm, base width 450 mm. Back and seat shall consist of rectangular reinforced concrete planks 1500 mm x 350 mm x 50 mm. Seating height of the bench shall be 450 mm. The bench shall be fixed with nuts on concrete mount, all holes sealed after assembly and installation. All materials required to be as per BIS specifications.HSR Rate(Rs.) 3596.00 Through Rate |
| 28 | HSR Item 26.122-Providing and displaying of Specimen Croton Petra Bangalore variety plant, having ht. 60 cm to 75 cm with 4 to 6 branches, well developed, fresh and healthy foliage approximately 60-65 leaves in 30 cm size of Earthen pot/Plastic pot and as per direction of the officer-in-charge. HSR Rate(Rs.) 605.00 Through Rate |
| 29 | HSR Item 26.328-Providing and stacking of Iresine herbstii, of height 20-30 cm. full of branches well developed in 10 cm size of Earthen Pot / Plastic Pot and as per direction of the officer- in-charge.HSR Rate(Rs.) 17.00 Through Rate |
| 30 | HSR Item 26.215-Providing and Displaying Marigold(Tagetes) inca hybrid different colour having 30 cm and above ht., with 6 to 8 flowers in bloom and blooming condition, well developed pot should be fully covered with fresh and healthy, foliage and flowers in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.HSR Rate(Rs.) 72.00 Through Rate |
| 31 | HSR Item 26.523-Providing and stacking Vernonia elaegnifolia (curtain creeper) plant of height 30 cm to 45 cm. in 20 cm size of Polybag and as per direction of the officer-in- charge.HSR Rate(Rs.) 29.00 Through Rate |
| 32 | HSR Item 26.432-Providing and stacking of Washingtonia filifea palm stem ht. 90-105 cm with 6-7 healthy leaves lush green leaves well developed in big size HDPE Bags as per direction of the officer-in- charge.HSR Rate(Rs.) 462.00 Through Rate |
| 33 | HSR Item 26.30-Supplying healthy, well branched, well bloomed and Planting rose beds including digging 30 cm deep bed and refilling of beds with excavated soil and FYM 0.0508 cum per sqm , Fertilizer DAP 50 gms and insecticides chlorpyriphos 10ml per sqm , planting of hybrid Budded rose saplings to be supplied in earthen pots /20cm x20cmpolybags , planting of sapling at 45 cm distance from plant to plant and row to row and 5 no. plants per sqmHSR Rate(Rs.) 159.00 Through Rate |
| 34 | HSR Item 6.1.7-Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 7. 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size)HSR Rate(Rs.) 2192.00 Through Rate |
| 35 | HSR Item 26.226-Providing and Displaying Petunia hybrid well developed with fresh and healthy foliage in full bloom 15- 20 plants in 60x35 cm Earthen Tray and as per direction of the officer-in charge.HSR Rate(Rs.) 30.00 Through Rate |
| 36 | HSR Item 26.76-Providing and fixing pair of Plastic dustbins 100 litre volume each, of two different colours, for dry and wet waste, made of virgin plastic to be mounted on MS rectangular hollow section 50 x 25 x 3 mm frames pivoted on 3 MS square hollow section verticals, 1 m above ground, one 35 cm RHS welded to each vertical member at base and grouted in 180 x 40 x 30 cm 1:2:4 cement concrete.HSR Rate(Rs.) 10666.00 Through Rate |
| 37 | HSR Item 26.460-Providing and stacking of Ficus panda of height 60-90 cm, with 8-10 branches, and healthy foliage, bushy in big size HDPE bag as per direction of the officer-in- charge.HSR Rate(Rs.) 208.00 Through Rate |
| 38 | HSR Item 26.379-Providing and stacking of Ficus religiosa (Peepal) of height 150-165 cm. in big poly bags of size 30 cm as per direction of the officer-in-charge.HSR Rate(Rs.) 75.00 Through Rate |
| 39 | HSR Item 26.9.4-Turfing lawns with fine grassing ( selection no.1/ Bermuda and Mexican/Neelgiri grass )including ploughing, dressing including breaking of clods, removal of rubbish, dressing and supplying of selection no. 1 / Bermuda doob grass and Mexican/Neelgiri grass roots, including supplying and spreading of farmyard manure at the rate of0.60 cum per 100 sqm, maintenance till weed free turf is formed 4. Providing and fixing Selection no. 1 grass turf with earth 50mm to 60mm thickness and ramming with required wooden tools, rolling with light roller to make the surface smooth and evenHSR Rate(Rs.) 100.00 Through Rate |
| 40 | HSR Item 9.18-Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.HSR Rate(Rs.) 147.00 Through Rate |
| 41 | HSR Item 9.57.2-Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 2. 110 mm diameterHSR Rate(Rs.) 200.00 Through Rate |
| 42 | HSR Item 13.41-Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).HSR Rate(Rs.) 396.00 Through Rate |
| 43 | HSR Item 26.280-Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh and healthy bushy plant in full bloom 75 to 90 cm ht. in 35 cm Cement Pot as per direction of the officer-in-charge.HSR Rate(Rs.) 363.00 Through Rate |
| 44 | HSR Item 26.456-`Providing and stacking of Ficus blackii (F.vivion) (bushy) of height 150-165 cm. with 8-10 branches and healthy foliage in earthen pots of size 30 cm as per direction of the officer-in- charge.`HSR Rate(Rs.) 288.00 Through Rate Please Enable Macros to View BoQ information |
