|
| 1 | 1.Clearing and GrubbingClearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be use dor auctioned, upto a lead of 1000 m Including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201. A) In area of non thorny jungle |
| 2 | 2.Earthwork in CoreConstruction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto p g q p 1000 m as per Technical Specification Clause 301.5i) Private land |
| 3 | 3.Earthwork in SubgradeConstruction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.i) Private land |
| 4 | 4.GSB Gr-IIA) By Mix in Place MethodConstruction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.G.S.B Gr- II |
| 5 | 5.WBM Gr-IIIWater Bound Macadam Poviding, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, handpacking, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening/ binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 1 as per Technical Specification Clause 404.3) Grading- III A) By Manual means |
| 6 | 6.ICBPProviding and laying interlocking concrete block pavement with M 40 grade grade of concrete blocks having thickness 80 mm as per technical specification clause 1504 complete including carriage.A) Including Edge Block/ Edge restraints |
| 7 | 7.Road Sign BoardProviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801ii) 600 mm circular |
| 8 | iv) 800 mm x 600 mm rectangle |
| 9 | 8.Providing and fixing of typical PMGSY informatory sign boardProviding and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2nos.75 mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450 mm x 450 mm x 600mm, 600 mm below groundlevel. The top most diamond plate will be welded to middle plate by 47 mm x 47 mm of 12 SWG steel plate tube. AllMS. will bestove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 |
| 10 | 9.Providing and fixing of road stud 100 x 100 mm die cast in aluminiumProviding and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive affect of salt and grit, fitted with lens reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (part 4) 1973. (As per Detail estimate) |
| 11 | Providing High quality PVC Color: Bright yellow and Black segments speed breaker |
| 12 | 11.Planting of trees and maintenance for one yearPlanting of Trees and their Maintenance for three Year (Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge mannure, planting the saplings, backfilling the trenches, watering, fixing the tree guatrd and maintaining the plants for one year. Please Enable Macros to View BoQ information |
