|
| 1 | Demolition of cement concrete (Un reinforced) in ground floor & pavings n.exc 15 cm thickness (below or above GL) and removing debries out side MOD land, complete all as specified and directed. |
| 2 | Demolition of brickwork or stone boulders masonry built in CM incl all quins, arches, pillers etc, complete all as specified and directed. |
| 3 | M & L Sub base 100 mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate), complete all as specified and directed. |
| 4 | M&L for brick work with Sub class 'B' brick, straight or curved on plan exc 6m mean radius built in CM (1:4), complete all as specified and directed. |
| 5 | M & L for Pre-cast cement concrete block masonry with solid blocks type C-1 (1:3:6) (20 mm graded aggregate) exc. 10 cm in width and setting in mortar (1:6), complete all as specified and directed. |
| 6 | M & L for Pre-cast cement concrete block masonry with hollow blocks type C1 (1:3:6) (16 mm graded aggregate) exc. 10 cm in width and setting in mortar (1:6), complete all as specified and directed. |
| 7 | M & L and fixed in repair machine pressed precast concrete interlocking paver block glossy finish any shape and size confirming to IS 15658 - 2006 of 80 mm thickness, M-40 grade with grey cement and pigment including 40 mm thick sand cushioning layer, complete all as specified and directed. Note:- Sand cushioning measured and paid seperately. |
| 8 | M & L and fixed in repair machine pressed precast concrete interlocking paver block glossy finish any shape and size confirming to IS 15658 - 2006 of 60 mm thickness, M-35 grade with grey cement and pigment including 40 mm thick sand cushioning layer, complete all as specified and directed. Note:- Sand cushioning measured and paid seperately. |
| 9 | M&L PCC 1:2:4 type B-1 using 20mm graded aggregate as in benching/cooping and sub base set in CM 1:6, complete all as specified and directed. |
| 10 | Taking down cement plaster on brick or stone walls etc incl raking out joints, hacking for key scrubbing down with water etc and including removing debris/rubbish materials off the site out side MoD land, complete all as specified and directed. |
| 11 | Material and labour for rendering 15 mm thick on fair faces of brick wall or stone surfaces in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified and directed. |
| 12 | M & L Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface, complete all as specified and directed. |
| 13 | M&L for 75mm thick plain cement concrete 1:3:6 type C-2 (using 40mm graded aggregate) as in plinth protection & similar work including necessary expansion joint filling with bitumen at a certain distance, complete all as specified and directed. |
| 14 | M&L preparing old painted brick or conc surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of floor coat emulsion paint, complete all as specified and directed. Make : INDIGO / Equivalent |
| 15 | Material and Labour for complete removel old plastered or unplastered surface of wall including cornices etc. by washing, rubbing down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying two coatsfor applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004,Alkali & fungal resistance,dirt resistance exterior paint of required shape (Company Depot Tinted) with silicon additives @ 1.43 liter/10Sq m over and including priming coat of exterior primer applied @ 0.90 liter /10Sqm with authorized applicator only including use of scaffoldings, complete all as specified and directed. |
| 16 | Material and Labour for new plastered surface of wall including cornices etc. by washing, rubbing down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying two coatsfor applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004,Alkali & fungal resistance,dirt resistance exterior paint of required shape (Company Depot Tinted) with silicon additives @ 1.43 liter/10Sq m over and including priming coat of exterior primer applied @ 0.90 liter /10Sqm over new surface with authorized applicator only including use of scaffoldings, complete all as specified and directed. |
| 17 | Supply and fixing for precast PCC Kerb stone of size 60 cm x 30 cm x 15 cm joint in cement mortar (1:6 ) and struck flush including dismantling of old PCC kerb stone, complete all as specified and directed. Please Enable Macros to View BoQ information |
