|
| 1 | Taking down Chowkats or frames with shutters not exceeding 1.5 Sqm each (Without taking off shutters from the frames), complete all as specified and as directed. |
| 2 | Taking down chowkats or frames with shutter(without taking off shutters from the frame) exc 1.5 sqm but n exc 4 sqm each, complete all as specified and as directed. |
| 3 | Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level), complete all as specified and as directed. |
| 4 | Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) any thickness, including cover fillets, complete all as specified and as directed. |
| 5 | Dismantaling of plain or corrugated steel sheeting, any gauge , thickness including nainital pattern roof covering, complete all as specified and as directed. |
| 6 | Demolition of brickwork or stone/boulder masonry built in cement mortar, complete all as specified and as directed. |
| 7 | Dismantaling wrough iron or mild steel work of any description, complete all as specified and as directed. |
| 8 | Demolition of reinforced cement concrete in ground floors and pavings as in lintel n. exc. 15 cm thickness (below or above ground level), complete all as specified and as directed. |
| 9 | M & L precast cement concrete (1:3:6) type C-1, (using 20mm graded crushed stone aggregate) block masonry with solid blocks 10cm in and setting in CM (1:6), complete all as specified and as directed. |
| 10 | Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,etc. also splays between floors and beams, etc.for rough finished surface of flat concrete, complete all as specified and as directed. |
| 11 | M & L Reinforced cement concrete (1:2:4) (Nominal mix ) type B1 (20 mm graded crushed stone aggregate) as in Beams, cantilevers, bressummers,lintels over 1.5m span, complete all as specified and as directed. |
| 12 | M&L mild steel deformed bars 10mm dia and over cut to length bend to shape required incld cranking bending spirally for hooping for column, hooking ends and binding with and incld mild steel wire (annealed not less than 0.90mm dia or securing with clips, complete all as specified and as directed. |
| 13 | Ditto as per item No-12 above but 5mm dia and over upto and incl 10mm dia in stirrups, spacer and binders. |
| 14 | M & L 15mm thick rendering on fair faces of brick work or concrete surface in CM (1:6), complete all as specified and as directed. |
| 15 | M&L 20mm thick rendering in two layers of 10mm each on brick or block concrete masonry walls in CM (1:4) with WPC incl finished even and smooth w/o using extra cement, complete all as specified and as directed. |
| 16 | M & L preparing plastered or unplastered new surfaces of wall and applying three coat of white wash, complete all as specified and as directed. |
| 17 | S & F rolled section as in main and cross beams hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angles cleats or other connecting plates in FE-410W (Gde E-250) quality A, complete all as specified and as directed. |
| 18 | M&L Preparation and applying two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, of any description, over 10cm width or girth not other wise described, complete all as specified and as directed. |
| 19 | S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with seif tapping screws, complete all as specified and as directed. |
| 20 | M & L for 75 mm thick cement concrete (1:4:8) type D-1, (using 40 mm graded crushed stone aggregate) as in sub base or sub flooring fininshing the surface even and rough to receive the topping layer, complete all as specified and as directed. |
| 21 | M & L screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:6), complete all as specified and as directed. |
| 22 | Non Skid ceramic colour tilles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed. |
| 23 | M & L screed bed or bedding layer of mortar 10 mm thick for fixing wall tiles in CM (1:3), complete all as specified and as directed. |
| 24 | M & L glazed ceramic coloured tiles (300 x 200mm x 6mm) thick on vertical surfaces such as skirting , dados & risers to steps set & Jointed in neat cement slurry & pointed in colored cement to match, complete all as specified and as directed. |
| 25 | S&F GI frame work of size 605 x 605mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flangesof 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and incl ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, complete all as specified and as directed. |
| 26 | S&F 10mm thick PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S, complete all as specified and as directed. |
| 27 | Solid PVC door frame of size 50mm x 47 mm, made out of 5mm plain colour PVC sheet, reinforced with MS square tube supplying and fixing in openings as per specification & drawing, complete all as specified and as directed. |
| 28 | S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC \\"C\\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification, complete all as specified and as directed. |
| 29 | S&F of in repair 200mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed, complete all as specified and as directed. |
| 30 | S&F in repair 125mm size aluminium handles, cast type, anodised and fixed, complete all as specified and as directed. |
| 31 | S & F steel ventilator with top hung shutter, including hinges, steel peg stay, complete all as specified and as directed. |
| 32 | S & F 3.0 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane, complete all as specified and as directed. |
| 33 | S & F 600 X 450 mm bevelled edge mirror, of selected quality glass, mounted on 6mm thick AC building board or commercial playwood and fixed to wooden plugs with chromium plated brass screw and cup washer, complete all as specified and as directed. |
| 34 | S & F 15mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors, complete all as specified and as directed. |
| 35 | S & F 15mm bore of tube medium grade galvanized with all fittings & fixed completet laid in trenches, complete all as specified and as directed. |
| 36 | S&F in vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and as directed. |
| 37 | S&F in repair 300mm long aluminium alloy, anodised sliding door bolts with haps staple (bolt type), and fixing clips of sheet, cast or extruted sections and fixing bolt and sliding bolts of extruted sections or cast aluminium alloy and fixed, complete all as specified and as directed. |
| 38 | S & F 110 mm bore PVC Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and as directed. |
| 39 | S & F 110 mm bore PVC bends any radius, complete all as specified and as directed. |
| 40 | S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed. |
| 41 | S & F 75 mm bore PVC bends with including for all necessary extra joints cuttings and waste to any radius, complete all as specified and as directed. |
| 42 | S & F 75 mm bore PVC junction double, (double T), equal or unequal, complete all as specified and as directed. |
| 43 | S&F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and as directed. |
| 44 | S & F bib taps cast copper alloy chromium plated with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed 15mm bore, complete all as specified and as directed. |
| 45 | S & F 15mm dia fency type pillar tap, cast copper alloy, capstan heads, chromium plated,screwed down high pressure, long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and as directed. |
| 46 | S & F Stop cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions, complete all as specified and as directed. |
| 47 | S & F towel rail 600 mm long of PTMT fixed with and including chrominium plated brass screws and wooden/plastic cleats (Min wt 190 gms), complete all as specified and as directed. |
| 48 | S & F toilet paper holder with flat recessed type stainless steel fixed to wall, complete all as specified and as directed. |
| 49 | S & F PVC valve less, syphonic action type flushing cistern 10 ltr capacity low level, with inlet, ball valve float, flush pipe and handle including brackets, complete all as specified and as directed. |
| 50 | M&L joint free non skid ceramic colured tiles 7 to 8mm thick, area of each tile exceeding 0.18 sqm but n.exc 0.38 sqm, in floors etc. set & jointed in neat cement slurry over 15mm screed bed or bedding layer CM (1:6) & pointd in coloured cement to match, complete all as specified and as directed. |
| 51 | M&L glazed ceramic coloured tiles 300 x 200mm x 7mm thick on vertical surfaces such as skirting, dados, set & Jointed in neat cement slurry over 15mm screed bed or bedding layer CM (1:4) & pointed in colour cement to match, complete all as specified and as directed. |
| 52 | S&F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasterners 12.5mm dia 40mm long, complete all as specified and as directed. |
| 53 | M&L 4mm thick asbestos cement plain building boards, fixed or laid /inserted to GI snap grid framework with screw in ceilings, complete all as specified and as directed. |
| 54 | M&L three coats of white wash on ceiling boards, complete all as specified and as directed. |
| 55 | S&F Solid PVC wall Lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing, complete all as specified and as directed. |
| 56 | S&F 5mm thick PVC sheet fillet od width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing, complete all as specified and as directed. |
| 57 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc, complete all as specified and as directed. |
| 58 | M&L for point wiring with two runs of 1.5 sqmm for phase and neutral, single core, multistranded copper conductor cable of 1100 Volts grade, conforming to IS-694 1990, PVC insulated and unsheathed , FRLS cable laid / fixed and including concealed in PVC rigid conduit on walls/ceiling alongwith 1.5 Sqmm copper conductor cable (multistranded) PVC insulated and unsheathed FRLS cable as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC modular boards and plate for mounting switches, sockets, fan regulators, accessories etc as specified and directed for one light point or one fan point controlled by one, one way switch, complete all as specified and as directed. NOTE: 1.Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black). 2. All points shall be earthed up to fixtures i.e holders,tube lights,all lights,ceiling lights,bulkhead lights,bldg security lights etc. |
| 59 | All as per serial item No. 58 here-in-before but for one 5 Amp, 5 pin socket outlet point on same board with other switches including earth wire as specified. |
| 60 | All as per serial item No. 58 here-in-before but with 2.5 Sqmm, PVC copper stranded cable FRLS type for phase, neutral and earth for one 15 Amp, 6 pin socket on independent board. |
| 61 | All as per serial item No. 58 above but for one 3 pin socket outlet, 15 Amps on independent board but below the switch board of light points in the same vertical plane/horizontal plane, with cables, 2.5 sq. mm size |
| 62 | S&F modular switch one way, 6 Amp, one module, 230V, complete all as specified and as directed. |
| 63 | S&F modular switch one way, 16 Amp, one module, 230V, complete all as specified and as directed. |
| 64 | S&F modular socket, 6A, 3 pin combined 2 module, 230V, complete all as specified and as directed. |
| 65 | S&F modular socket, 6A/16A, 3 pin combined 2 module, 230V, complete all as specified and as directed. |
| 66 | S&F lamp holder insulated,with LED lamp 12 watt PVC / polycarbonate /bakelite body, complete all as specified and as directed. |
| 67 | S&F ceiling rose surface bakelite 65x50mm three terminal, complete all as specified and as directed. |
| 68 | Supply and fix electric water heater,storage type steel body and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece including anchoring bolts and making connection and testing, complete all as specified and as directed. |
| 69 | Supply and fixing energy efficient LED tube lights fitting 4\\", 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed. |
| 70 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete including taking down old unserviceable fitting, complete all as specified and as directed. |
| 71 | Supply and fixing Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral link of 4 way 240 Volts AC, complete all as specified and as directed. |
| 72 | Supply and fixing MCB Single pole and neutral upto 32 Amps capacity 10 KA 240 Volts 50 HZ. conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp, IP 20 protection, complete all as specified and as directed. |
| 73 | Supply and fix MCB/Isolator single pole (SP), 10 kA of 6 Amps to 32 Amps capacity 240 Volts. conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp, IP 20 protection, complete all as specified and as directed. |
| 74 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm, complete all as specified and as directed. |
| 75 | Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC (1:3:6) type C-1 , 50 mm thick pre cast RCC (1:2:4) type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 5 of MES SSR Part-I, complete all as specified and as directed. |
| 76 | S&F gun metal, globe or gate valves of 25 mm bore dia, with iron wheel head, screwed both ends for iron pipes and fixed including, complete all as specified and as directed. |
| 77 | S&F gun metal, globe or gate valves of 20 mm bore dia, with iron wheel head, screwed both ends for iron pipes and fixed including, complete all as specified and as directed. |
| 78 | S&F Rotational moulded polythene water storage tank (cylindrical vertical with closed tops) hoisted and fixed in position of 1000Ltrs capacity including tank cover and all necessary connection of tank nipple, complete all as specified and as directed. |
| 79 | S&F steel water tubing of the 25 mm bore sizes, ‘Medium grade’, galvanized, with all fittings; laid in trenches or on ground, complete all as specified and as directed. |
| 80 | S&F steel water tubing of the 20 mm bore sizes, ‘Medium grade’, galvanized, with all fittings; laid in trenches or on ground, complete all as specified and as directed. |
| 81 | S&F PVC float valve, high pressure with polythene float and fly nut complete screwed for PVC pipe and fixed in 20mm bore pipe, complete all as specified and as directed. |
| 82 | M&L for cutting, screwing the same for alterations or additions in position including refixing old steel tubing and connections in new or old position by means of equal 'T' of Reduced 'T' junction of dia upto 50 mm, complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 83 | M&L for cutting, screwing the same for alterations or additions in position including refixing old steel tubing and connections in new or old position by means of equal 'T' of Reduced 'T' junction of dia upto 50 mm, complete all as specified and as directed. Please Enable Macros to View BoQ information |
