|
| 1 | Supply and errection of Double pole 11 Mtr. long 410 SP-55 ST pole support duly grouted with 1:4:8 cement concrete (1-cement , 4fine sand and 8-OBB of 40mm. nominal size) including plinthing with 20 mm. nominal size stone grit 10 Cm. Below the G.L. and 30Cm. Above the G.L. and plastering with 1:4 cement mortar, plastered and painted in the same manner as already specified for respective supports as per design including channels, clamps for pin insulator, disc fiting insulator with fittings stay earthing etc. complete with all material labour and T&P etc. Required for proper completion of work as per drawing and direction of E/I. |
| 2 | ST GI BOTTOM Pole SP -55 , 11.00 mtr Long |
| 3 | S/F of Barbed wire 1.5 Kg. Duly clamped with 2 No. clamps made of 20 x 3 mm at both end on poles, flate including bolts, required for nuts and washer complete with all material labour and T&P etc. for proper completion of work. |
| 4 | Making suitable earthing of ST poles /Double pole/ Section End Double pole with 2.5Mts. long 20mm dia M.S. rod with 7/16 SWG G.S. wire in 15mm dia 2Mtr. long G.I. pipe duly clamped with 3 nos clampes and binding on poles including cost of labour & T & P etc. required for proper completion of work. |
| 5 | Supply, delivery, testing and commissioning of 11KV (E) XLPE cable having compacted circular stranded aluminium conductor, conductor screening of extruded semi conducting compound. Cross linked polythylance (XLPE) insulation screening of the extruded semi conducting compound followed by copper tape, cores laid up, taped PVC inner sheath, single layer of steel strip armouring, overall PVC outer sheath conforming to IS: 7098/Part-II/ with latest ammendment for following mentioned sizes. (300 sqmm HT Cable Laying in HDPE pipe) Complete in all respects. Make:- PolyCab, Gloster, Havells, KEI ) |
| 6 | 300 sq mm 3 core H.T. Cable |
| 7 | Drilling of road crossing at depth 1.5 to 2 mtr as required and laying charges of cable in 160/110 mm dia HDPE pipe. complete with all material, labour, drilling machine and T&P etc. required for proper completion of work. |
| 8 | For 160/110 mm dia HDPE pipe |
| 9 | Supply and jointing of Out-door type 11 KV Jointing Kit (HEAT SINK) for 3 core HT XLPE cable including cost of all material labour T&P etc. as per proper completion of work. (Make:- Raychem/ Dension/ 3M). |
| 10 | 300 sq mm outdoor type Jointing Kit |
| 11 | Supply, Delivery, Installation, Testing & Commissioning of 11 KV Straight through cable jointing kit of 3 core cable jointing Complete in all respects as required for proper completion of work. (make:- Raychem/ Dension/ 3M) |
| 12 | 3C x 300 sq.mm. |
| 13 | Supply of HDPE pipes (upto PN 6 Kg Pressure Rating material Grade PE 80, Pressure Rating PN 6.0) as per relevants IS suitable for HT / LT XLPE cable. (Make :- Sudhakar, Creator Poly Extrusions LLP, Supreme, Josexim) |
| 14 | 160 mm dia HDPE Pipe |
| 15 | S/F of G.I. Pipe of following sizes for DP cable duly clamped with supports by 2 No. with clamps of 50 x 6 mm M.S. flats bolts, nuts and washer required for proper completion of work.(Make:- Jindal/ Tata/Prakash). |
| 16 | 150 mm dia |
| 17 | S/F of Danger board of size 200 x 250 x 1.6 mm of M.S. sheet fixed with clamp of 20 x 3 mm M.S. flate including bolts, nuts and washer duly painted completed with all material, labour and T&P etc. required for proper completion of work. |
| 18 | Supply and Fixing of Cable Route Marker with cement concrete 1:2:4 (1 cement : 2 corse sand : 4 graded stone aggregate 20 mm nominal size ) of size 1000x400x100 mm in suitable masonry enclosure as directed by E/I. Please Enable Macros to View BoQ information |
