Tender For Providing And Applying Tack Coat With Bitumen Vg-10 Using Bitumin Pressure Distributor At The Rate Of 0.20 Kg. Per Sqm On The Prepared Bituminous Surface. , Providing And Laying Bituminous Concrete With Higher Capacity Batch Type Hot Mix P, Kanpur-Uttar Pradesh
TDR : 55544353
Tender Notice
Corrigendum Details
BOQ
Expired
Kanpur
Uttar Pradesh
Corrigendum : Tender For Providing And Applying Tack Coat With Bitumen Vg-10 Using Bitumin Pressure Distributor At The Rate Of 0.20 Kg. Per Sqm On The Prepared Bituminous Surface. , Providing And Laying Bituminous Concrete With Higher Capacity Batch Type Hot Mix P
Providing and applying tack coat with bitumen VG-10 using bitumin pressure distributor at the rate of 0.20 kg. per sqm on the prepared bituminous surface.
2
Providing and Laying bituminous Concrete with higher capacity batch type hot mix plant using crushed aggregates of specific grading, premixed with bituminous binder @ 5.40% of Mix and filler transporting the Hot Mix to work site, laying with a hydrostatic paver finisher with senser control to the required grade level and alignment, rolling with smooth wheeld vibratory and tendem rollers to acheive the desired construction as per MORT&H specification clause No.507 complete in all respects.
3
Providing and Laying of Interlocking Concrete Block Pavements having thickness 80 mm as per drawings and Technical Specification Clause 1504.
4
Construction of Granular Sub-Base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401
5
Brick masonry work in cement mortar in substructure complete excepting pointing and plastering as per drawing and technical specifications Clauses 602,603,604, 1202 & 1204
6
Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802,804,805,806, 807, 1202 and 1204
7
Painting lines, dashes, arrows, etc. on roads with hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702 (SOR PWD) Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
