|
| 1 | Supplying Jhaw / Eucalyptus bullah piles at work site, including dressing and making one end pointed.Note: Diameter of pile to be measured at a distance of 1.5m from the thicker end (i) 10 cm bullah |
| 2 | (ii) 12.5 cm av. Diameter |
| 3 | (ii) 15 cm av. Diameter |
| 4 | Labour for driving Jhaw / Eucalyptus bullah piles by monkey in all sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tackles (ii) 12.5 cm av. diameter |
| 5 | (ii) 15 cm av. Diameter |
| 6 | Coal tarring with 5% pitch including cost of material and labour complete as per direction of the Engineer-in-chargeb) Two Coat |
| 7 | Supplying, fitting and fixing with iron nails half split bullah wailing pieces and cross pieces etc. complete with cost of all materials and carriage to site.(a) Width of thinner end above 10 cm. and less than 15 cm.(i) Jhaw / Eucalyptus. |
| 8 | Fitting, fixing bitumen drum sheet to bullah piling and wailing piecesincluding cutting straightening drum sheet fixing with country nails @ 20cm c/c at top & bottom and bolts& nuts at top & bottom at every joint of drum sheet with a laping of 15 cm, including supply of drum sheet, fixture all complete as per direction of the Engineer - in - charge. |
| 9 | Supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incedental charges etc. all complete (capacity 50 kg). |
| 10 | Labour charges for filling empty cement gunny bag / polythene bag (capacity 50 kg) with all kinds of earth (wet or dry), sand or agreegates(stone / brick) and sewing as done in case of cement bags ,( tying with a knot after filling will not be accepted ) , and stacking within a lead of 30 metre as per direction of Engr-in-charge (cost is excluding the cost of any types of filling materials).NB:- Volume of earth/ sand filled bags should not be less than 0.028 cum/ bag. |
| 11 | Dumping in position earth / sand filled gunny / poly bags (capacity 50 kg) within a lead of 30 metre inclusive of all lifts. |
| 12 | Earthwork in excavation in all kinds of soil for making embankments, repairs to the embankment, closing breaches etc. as per profile including supply and transporting the earth by truck or tractor or any other mechanical means on land , including loading, transporting, unloading and stacking with all lifts bothways and head load where necessary and depositing the same on embankments, clannels, filling depressions in requisite profile, levelling as per direction of the Engineer-in-charge within a lead of,NB :- Measurement to be taken on the basis of stack measurement / prepost work section measurement after deduction of void as per norms. No extra payment will be made for stacking.D) Beyond 3.00 km and upto 4.00 km |
| 13 | Single Brick Flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 14 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes.Pakur variety |
| 15 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. |
| 16 | Suppling, fitting and fixing single skin color coated trapezoidal profile for wall cladding, Roof shall be made of 0.45mm BMT (Base MetalThickness) (0.50mm TCT (Total coated thickness excluding paint),G550(min 550 yield strength), of Zincalume metallic coating (1S15965)with high Solar Reflectance Index (SRI) value for better colling as per|thermatech technology 1000-1015mm effective cover width with five major corugation, 28mm high rib spaced at 203mm c/c with subtle Square fluting in the pan and the end rib shall have anti-capilary groove |and returm leg. The steel sheet s.ail be fastened with 40 micron zinc coated or 25 micron zinc-tin allay coated, hex head, self-drilling screw as per IS 3566-2002 Class 3 fastener. The base sleel shall be coated with zinc-aluminium alloy Zincalume (AZ150)(Le. 55% Al, 43.4% Zinc,1.6% Si) minimum of 150 g/m2 coating total on both sides, pre-painted with colorbond XRW (xterior roofing, walling) paint system of 35 micron Super Durable Polyester paint (SDP) with stable inorganic pigment with no lead contents confirming 1815965. The sheet shall be free from|defects and have brand marking of the manufacturer giving product|details on the back of the sheet at regular interval confirming genuinity of the material. i) In Roof (a) With 0.50 mm thick sheet. |
| 17 | Supplying Ordinary Gharamee |
| 18 | Supplying Mazdoor( Male /Famale ) |
| 19 | Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth |
| 20 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar(b) 15 mm thick plaster |
| 21 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. |
| 22 | Durma mat works strengthened with split bamboo placed both ways (225 mm. apart) both sides and tied together fitted and fixed complete (but excluding the cost of supporting framework) (i) Double durma mat works(a) In walls or floors |
| 23 | Supplying at site and fitting & fixing Mild Steel long nuts & bolts etc. complete as per the direction of the Engineer-in-charge. |
| 24 | Supplying fitting fixing in position neting with pvc coated crinkle mesh of approved colour with wooden or steel or concrete frame work including cost of galvanised bolts, nuts, screws, nails, spacers shape welding etc complete but excluding the cost of supporting frame works, battens etc. (c) 50 mm. x 50 mm. x 8 g. |
| 25 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. Please Enable Macros to View BoQ information |
