|
| 1 | Dismantling existing plaster i/c disposal of refuse within a distance of 60 m . |
| 2 | Dismentling RB work with disposal of refuse within 60 m |
| 3 | Dismantling door and windows chaukhat with hold fast i/c stacking material within 60 m |
| 4 | Dismantling brick work or stone work and cement concrete in cement mortar and including stacking of material with in a distance of 60M as per direction of Engineer-in-charge |
| 5 | Cement plaster 12 mm thick on brick work in cement mortar 1cement : 4 coarse sand. |
| 6 | Providing and laying D.P.C. 40 mm thick with cement concrete consisting of( 1:2:4) cement , Coarse sand and 10mm grade stone grit and including cost of all material, labour and T&P etc.complete for proper completion of work. |
| 7 | Providing and laying Vitrified tiles in floor of 600 x 600mm sizes (thickness 10mm), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints. |
| 8 | Providing & fixing 1st quality ceramic glazed floor tiles conforming to is 15622 (thickness to be spesified by manufacturer of approved make in all colour ,shade except burgundi , bottle green black of any size as approved by EIC in skirting riser of steps and dedo over 12 mm thick bed of cement mortar 1:3 and jointing with grey cement slurry @ 3.3 kg/sqm i/c pointing in white cement mixed with pigment of matching shade complete . |
| 9 | Structural steel work in single section, including cutting, hoisting, and applying a priming coat of approved steel primer all complete. |
| 10 | Providing and fixing ISI marked flush doors,shutters conferming of I.S. 2202 part-1 decorative type core of block board construction with frame of 1st class hard wood & well matched teak 3 ply veening with vertical grains or cross bend & face vaneers on both face of shutters i/c isi marked stainless steel butt hinges with nessesary screw. |
| 11 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand & manufacturer. |
| 12 | Distempering (First coat) with oil bound distemper of approved brand and manufacture and of requred shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J & N. Shalimar Asian paints etc. after thoroughly brushing the surface free from mortar, dropping and ay foreign material and also including preperation of surface even with plaster of approved synthetic material and sand prepared smooth with cost of all material, labour T & P Etc. complete. |
| 13 | Finishing walls with Acrylic smooth exterior paint of required shade new work two or more coat applied @ 1.67 litr./10 sqm over and i/c priming coat of exterior primer applied @2.20 Kg/sqm supply of all labour material & T&p required for proper complition of work. |
| 14 | Earth work in foundation in dry ordinary soil (loam clay or sand) including lift upto 1.5m and lead upto 30m including back filling, watering and ramming of excavated earth into the structure and the sides of foundation trenches or into the plinth with removal and disposal of surplus earth as directed by E in C upto a distance of 30m from the foundation trenches. |
| 15 | Providing and laying Cement concrete (1:4:8) in base with cement , coarse sand , and 20mm to 40mm stone ballast including cost of all material, labour and T&P etc.complete. |
| 16 | Brick work in 1:4 cement mortar with cement , coarse sand , and M-150 bricks . including cost of all material, labour and T&P etc.complete. |
| 17 | Providing and laying RCC. (1:1.5:3) including cost of all material, labour and T&P etc.complete.(Excluding cost of Reinforcement) |
| 18 | Supplying of steel bars with bending,binding,cutting and placing of reinforcement including cost of wire including all material, labour and T&P etc.complete. |
| 19 | Centering and shuttering for RCC/RB work i/c cost of centering & shuttering etc. |
| 20 | Supply and laying of I shaped zigzag precast interlocking tiles of thickness 80 mm (ordinary gray)compressive strength not less then 30mpa & weight 4.50 kg i/c 25 mm thick local sand base levelling and dressing of surface to required level and slope ,filling joints with local sand all complete work etc. |
| 21 | Providing and Laying kota stone slab flooring over 20mm thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete with base of cement mortar 1:4 (25 mm thick) complete. |
| 22 | Supply and hoisting of Sintex or equivalent high density polyethylene seamless of piece moulded tanks and placing the same in proper position including all taxes, labour and T&P etc. for proper completion of work. Tank should be ISI marked, Sintex or equivalent. |
| 23 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 24 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. |
| 25 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:Single half stall urinal with 5 litre PVC. automatic flushing cistern |
| 26 | Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC.Flexible pipei) 32 mm dia waste fittings complete. |
| 27 | Providing & Fixing GI pipes complete with GI fittings and clamps including making good the walls etc. concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall: |
| 28 | Providing and fixing C.P. long body brass bib cock of approved quality conforming to IS standard &weighing not less then 690 grm 15 mm nominal bore |
| 29 | Wiring point for light (Surface Conduit) in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit and GP Box ,Modular switch and ceiling rose/angle/ batten holder etc. complete in all respect, as directed . |
| 30 | Wiring point for fan /fresh air fan (Surface Conduit) (light duty exhaust fan) in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit ,GP Box, Modular type switch & ceiling rose etc, complete in all respect. |
| 31 | Wiring Point for plug (Surface Conduit) in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit , GP Box and Modular type switch and socket etc. complete in all respect. |
| 32 | Supply and fixing of power plug with 20 Amp./250 (Surface Conduit) volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S box including supply of all material, labour T&P etc. required for proper completion of work |
| 33 | Supply and fixing of Electronic fan regulator( Modular) 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work |
| 34 | S&F surface/flush mounting 8ways TPN distribution board with additional metal door without MCB complete in all respect, as directed by Engineer in charge. |
| 35 | S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve |
| 36 | S&F of 40 Amp. SPMCB (10KA)C Curve C |
| 37 | Providing and fixing stainless steel kitchen sink with drain boad Size 510x1040mm bowl depth 200mm with C.I. brackets, 15 mm C.P. brass taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls etc.complete |
| 38 | Providing and fixing Fullway Gate Valve of Approved Quality including cost of material,labour and T&P etc. |
| 39 | Submain in conduit on surface (2.5 sq. mm.) Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia. heavy duty (2mm thick) PVC conduit with 1 number 1.5 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor as earth continuity wire. etc, complete in all respect. |
| 40 | Supplying and fixing 1.5 HP submersible pump incuding testing labour T&P and all complete fittings as per Direction of Engineer in Charge. |
| 41 | Supply & Fixing of Starter single phase MV. incuding testing labour T&P and all complete fittings as per Direction of Engineer in Charge. |
| 42 | Supply & fixing of 6 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. |
| 43 | Structural steel work in single section, including cutting, hoisting, and applying a priming coat of approved steel primer all complete. |
| 44 | S/F Sign Board 0.0 0.0 Please Enable Macros to View BoQ information |
