|
| 1 | Through scrapping of roof tiles and plastered surfaces on open terrace to remove dust, green moss, algae etc., washing with soap, soda and water for preparing the surface suitable for priming with Nitobond SBR including cost of all materials, labour charges, lead, lift etc complete |
| 2 | Providing one layer of 45 GSM fibre glass mesh and one coat of Fosroc Nitobond SBR latex primer and two coats of Fosroc Brushbond RFX elastomeric polymer modified cementitious waterproofing coating over the primed surface area. All material and lbour charges. |
| 3 | Dismantling the existing aluminium partition section and refixing the same where ever necessary including cost of all materials , ,lead,lift labour for fixing etc., complete. |
| 4 | Dismantling the existing false ceiling carefully and stacking the scrab materials, devolution of scrab to central store at Kuthiraikalmedu including cost of all tools, lead,lift all labour charges etc., complete. |
| 5 | Providing and fixing in position of anodised aluminium framed partition of approved quality including supply, fabrication and fixing the aluminium partition in position, cost of all materials, labour charges, lead, lift, T&Ps, personal protective equipments, other safety appliances, etc., complete and (i) Vertical and horizontal posts - anodized natural colour matt finish aluminium section 63x38mm of thickness 2.45mm, countrywood filled alround, verticals post and horizontals shall be within 900mm spacing c/c (ii) the top and Bottom panels should be covered with 5.5mm thick plain glass with necessary rubber beeding and covered with Aluminium beeding on both sides of the shutter and as directed by the site Engineer. The required power supply shall be provided by the department at one point . |
| 6 | Supplying, fabricating and fixing in position of Aluminium anodised natural colour matt finish of single leaf fully glazed sliding door with 5mm thick plain glass for top and bottom panels , the Shutter bottom rail of 100x44.45x2.50 mm @ 1.974 kg/m, Top, Vertical, lock rails of 50x44.45x2.50mm @ 1.292 kg/m, Running channel section: 50 x 44.45 x 2.50mm @ 1.292 kg/m, on top and bottom and necessary accessories such as Alu.clips, Alu handle 100x30mm @ 0.988 kg/m on both sides, lock, rollers, including cost of materials, labour charges, for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beam masonry with power drill wherever necessary and redoing the damaged portion to the original condition afterfixing etc., complete. |
| 7 | Providing false ceiling using new Calcium Silicate Board Plain Sheets (or) Equivalent Board False ceiling 10 mm thick with aluminium grid work of size (600 mm x 600 mm) using 38x 25x1.50mm for main and cross runners, grid suspended from ceiling with 6mm MS rods with adjustable bolts and nuts arrangement including Painting two coats of emulsion paint over a coat of primer, cost of all materials, labour charges, lead, lift, etc,. complete as per standard specifications and as directed by the engineer at site. |
| 8 | Wiring with 2x1.5 Sq.mm (22/0.3) PVC insulated Single Core Unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T switch with painting of suitable colour with continuous earth wire connection of 14SWG TC open for PVC light point/fan point including cost of all materials,lead, lift, etc., complete as per standard specifications and as directed by the engineer at site etc., complete |
| 9 | Supply and fixing of LED INDOOR 24w LED 4000k 2x2 square Type Recessed Fitting LIGHT EMITING DIODE including cost of all materials,lead, lift, etc., complete as per standard specifications and as directed by the engineer at site etc., complete. |
| 10 | Supply and fixing of 7W /9W LED Bulb (Philips / Havells /equivalent) with TW round blocks on wall or ceiling with with PVC unsheathed copper laed from terminals to the fittings including cost of all materials, Labour charges, etc., complete. |
| 11 | Supplying fabricating fixing in position cavity flooring 200mm height from finished floor level, using unitile Access floor systems- Edge support Regid Grid system to be able to withstand aUDL of 1200 kg/sq.mm and a Point load of 360 kks base plate 110 x110x2mmtk GI/Epoxy coated, Placed @ 600mm c/cm Both direction, fixed to floor with adhersive/serews,threaded GI pipe 25mm OD reiveted to base plate & threaded GI pipe 25mm ID at top with check nut, top GI pedestal 90x90 x4mm, GI strugers 20 x25 x1.20mm screwed to pedestal head fixing Unitile solodreel USF 800 panels of size 600 x600mm top surface with factory lamanated Anti - static HPL including the cost of all materials, labour, lead lift,T&p etc complete |
| 12 | Providing and fixing in position of pre-cast slab for over head water tank using RCC 1: 1 1/2:3 using 20 mm HBG stones including cost all materials, shuttering charges, labour charges, placing in position, lead, lift, etc., |
| 13 | Providing MS / RTS steel reinforcement for all RCC works including cutting, bending, binding, tying and placing in position including cost of steel, galvanized binding wire, lead, lift and etc., complete as directed by the Engineer in charge at site . |
| 14 | Supplying and fixing position of exhaust fan 18''…(Heavy Duty)including of cost of all materials lead ,lift ,labour and transport charges, etc,.., complete as per standard specifications |
| 15 | Supplying and fixing of \\"Z type\\" MS steel ventilator using ISA 35 X 35 X 5 mm of required size, with fixed outer frame , 4 mm glass 2 nos, and fly proof mesh in steel including fabrication and painting with two coats of enamel paint over primer including hold fast, chipping, dismantling /making holes in masonry/Concrete wherever necessary and make good the disturbed area to the original condition after fixing, cost of all materials, labour charges, lead, lift, fixing charges, Transport, T&P, etc., complete . |
| 16 | Supplying of MDF Door Sutter with FRP Door made out of FRP Sheets with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and Solid Core FRP Shutter Panel of 5mm thick and hollow core frames of wall thickness for styles and rails etc., of sizes specified by Engineers |
| 17 | Providing Wall Panelling using PVC fluted panel 10mm thick, fixed to POP Channel of required width fixed to the RR walls,including cost of drilling, interlocking strip,screws, L corners the rate inclusive of conveyance to site and labour charges and as directed by the Departmental Officers incharge. |
| 18 | Supplying and fixing of PVC door with frame and shutter hollow type 200x20 mm panels with 1mm thick and styles & nails with 2mm thick approved colour of quality with following door accessories 2 nos 4\\" aluminium tower bolt, 1 no.6\\" Aluminium drops, 2 nos Aluminium handle, 3 nos Aluminium hinges with necessary materials serews for fixing fastening redoing & finishing work cost including cost of all materials, labour charges, all lead, lift etc complete |
| 19 | Brick work in CM 1:5, by II class chamber burnt bricks (9\\"x4 1/2 x3\\") including cost of materials, labour,curing scaffolding charges, curing all lead and lift etc., complete |
| 20 | Plastering with CM 1:5, 12mm thick for brick works including cost of all materials, labour, scaffolding, curing charges, all lead & lift etc., complete |
| 21 | Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of \\"U\\" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification. |
| 22 | Supplying , fixing and laying of PVC pipe 25 mm dia 10 Kg/ cm2 with ISI make specials, cowl, shoe, bend etc., with all materials, lead, lift, etc., complete, as per standard specification. |
| 23 | Supplying , fixing and laying of PVC pipe 32 mm dia 10Kg/ cm2 with ISI make specials, cowl, shoe, bend etc., with all materials, lead, lift, etc., complete, as per standard specification. |
| 24 | Supplying and fixing white glazed indian water closet 580 x440 mm of approved quality with P or S Trap embedded to shape in position with PVC low level PVC low level wall mounting white flush tank of 10 litre capacity with all internal fittings, 15mm Gun metal wheel valve heavy duty with nipple, nylon connecting hose for inlet to flush tank including cost of all materials, lead,lift etc., complete as per standard specification. |
| 25 | Supplying and fixing Colour European water closet with P or S Trap with Double Flapped Seat and Seat Cover with Brass hinges and 12.5 litr capacity Porcelain low Level flushing Tank with all internal fitting 15mm Gun metal wheel valve heavy duty with nipple, nylon connecting hose for inlet to flush tank including cost of all materials, lead,lift etc., complete as per standard specification. |
| 26 | Supplying and fixing Colour wash hand basin without pedastal of size 550x400mm with all accessories such as cast iron brackets, 32 mm dia CP waste coupling, 32 mm dia B class GI waste pipe, 15 mm dia GM wheel valve, 15 mm dia nylon connection, 15mm dia brass nipples, 15 mm CP pillar Tap etc., including cost of all material, labour, lead,lift etc complete. |
| 27 | Flooring with vitrified tiles 8mm thick of approved colour, quality and required size over the flooring with cm 1:3, 20 mm thick and pointed with white / colour cement including chipping the concrete and roughening the surface cost of all materails, lead, lift, labour charges etc., complete as directed by the Engineer in Charge. |
| 28 | Dadooing walls with glazed tiles of approved colour, size and quality laid in C.M. 1:2, 10 mm thick and pointing with white/colour cement using 0.40 kg/m2 including finishing the joint and pointing flush with tile surface including cost of all materials, labour charges, lead, lift etc., complete as per standard specification. |
| 29 | Supplying and laying of Non slippery ceramic floor tiles of approved quality and colour laid in CM 1:2, 20mm thick, and pointing with white cement using 0.40kg/cm2 including finishing the joint and pointing flush with tiles surface including cost all materials,labour charges, lead, lift etc., complete as per standard specification. |
| 30 | Painting two coats for old iron grill work with Synthetic enamel paint after thorough scrapping and removing old paint including cost of all materials, Labour, Lead, Lift etc., complete. |
| 31 | Painting two coats with approved good quality enamel paint to the old wooden works including cleaning and scrapping wherever necessary including cost of all materials lead,lift,labour charges etc complete. |
| 32 | Labour charges for writing name board/ slogans over the plastered surface wall, base enamel painting 2 coats over 1 coat of primer then writing letters including cost of all materials, labour lead,lift etc, complete. |
| 33 | Supplying and fixing of 100x75mm Nahini trap of standard make including cost all materials,labour charges, lead, lift etc., complete as per standard specification. |
| 34 | Supply and fixing brass chromium plated screw down Tap 15/12 mm dia (Heavy Type) including cost all materials, labour charges, lead, lift etc., complete as per standard specification. |
| 35 | Supplying and fixing of best quality Brass Chromium Plated Towel Rail with end cooks 60 cm long and 20mm dia with Brackets of approved quality and as directed by the Engineer incharge at site in the bath room, including cost of all materials, labour for fixing, lead, lift with necessary teak wood plug etc., complete. |
| 36 | Colour washing with two coats using ready mixed interior Emulsion (First quality - Apex or its equivalent) of approved quality and colour over a coat of interior emulsion primer including thorough scrapping, clean removal of dirt, cost of all materials, Labour, lead & lift etc., complete and including necessary crack filling paste, putty wherever required.as directed by the department officer at site. |
| 37 | Outer colour washing with two coats using ready mixed Exterior Emulsion (First quality - Apex or its equivalent) of approved quality and colour over a coat of exterior emulsion water based primer including thorough scrapping, clean removal of dirt, cost of all materials, Labour, lead & lift, etc., complete and including necessary crack filling paste, putty wherever required.as directed by the department officer at site. Please Enable Macros to View BoQ information |
