|
| 1 | Demolition of stone, brick/PCC block masonry work built in cement mortar complete all as directed. |
| 2 | Demolition of plain cement concrete of any description and in any position complete all as directed. |
| 3 | Dismantling wrougt iron or mild steel work of any description not other wise privided for (steel gate & Y angles etc) including stainless steel letters in the board all as directed. |
| 4 | Taking down cement plaster on brick or stone walls or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete. |
| 5 | Dismantling old fencing , any type complete all as directed. |
| 6 | M&L for PCC type D2 1:4:8 (using 40mm graded granite stone aggregate) as in foundation, filling and mass concrete. |
| 7 | M&L for mild steel work such as posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, welding etc., and similar work conforming to Fe-290 Gde E-165 |
| 8 | M&L for mild steel Round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia for securing with clips quality conforming to deformed or twisted bars. |
| 9 | S&F in repair galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as directed. |
| 10 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire |
| 11 | Supply only Chain link MS galvanisd fencing, any size or type all as directed. |
| 12 | S&F Galvanised MS concertina coil fencing of 600mm dia, centre to centre barb distance 48mm, thickness of strip 0.50mm, lengrh of barb 10.50. Dia of spring wire 2.50mm, number of spiral (No of turns) 50/51 per coil, clips per spiral 5, approximate weight 8.25 Kg/Coil (Recommended coil stretch length 6m) and conforming to IS all as per manufacturers instructions complete all as directed. |
| 13 | M&L for pre-cast cement concrete block masonry with solid bricks with PCC 1:3:6 type C1 using 20mm graded stone aggregate exc 10cm width and setting in CM 1:6 Complete all as specified and as directed. |
| 14 | M&L Plain cement concrete 1:2:4 type B-1(using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 15 | M&L Walling of random rubble, uncoursed or polygonal rubble walling, brought up to courses built in cement mortar 1:6 all as directed. |
| 16 | M&L Walling of random rubble,uncoursed, well bonded, laid dry in abutments and similar work complete all as specified and directed. |
| 17 | M&L Keyed pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:3 all as directed. |
| 18 | M&L Rendering 15mm thick CM (1:4) on block masonry surface, finshing the surface even and smooth without using extra cement completed. |
| 19 | M&L for prep of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed completed. |
| 20 | M&L for preparation of plastered surfaces and applying two coats of 100% Premium acrylic emulsion exteriar weather coat paint smooth having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade will be carried out in any pattern (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm all as specified and directed by Engineer-in-Charge. |
| 21 | M&L preparation of old decorated surfaces of wall including removal of vegetation and applying one coat cement base paint complete all as specified and as directed. |
| 22 | M&L for preparation of new steel surfaces steel work over 10cm in width or girth of any description and applying two coat of synthetic enamel paint over a coat of red oxide primer all as directed. |
| 23 | M&L Preparation of old painted surfaces of steel work of any description exc 10 cm width or grith not otherwise specified and applying one coat of syntheic enemal paint. |
| 24 | S&F broken glass coping on top of walls in CM 1:3 complete all as directed. Please Enable Macros to View BoQ information |
