|
| 1 | Taking down old unserviceable LT UG Cable 300 Sqmm 3.5 Core from Trenches complete all as specified and directed by engineer in charge.. |
| 2 | M&L for shifting of Existing LT Panel and dismantling/demolition of concrete foundation carefully shifting up to 7 -10 Meter Distance for reinstalling the same within 7-10 mtrs with PCC foundation ,Cable connection from LT panel to old cables using with new cables and necessary cables,cable Joint kits,cable lugs etc. complete all as specified and directed.Note:-Cables, joint kits,cable lugs,necessary PCC foundation are paid separately. |
| 3 | Supply and lay LT under ground cable XLPE insulated armoured 1100V grade with multistranded aluminium conductor confirming to relevant IS in trenches, ducts, through pipes fixed to wall etc all as directed including cable gland, terminal socket and connecting up of size 300 sqmm 3.5 core including dismantling of old U/S cable. |
| 4 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep and getting out in hard/dense soil for laying/repair of cable. |
| 5 | Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25cm thick. |
| 6 | Removing excavated materials to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point. |
| 7 | Supply bricks of size 230 mm x 115 mm x 75 mm, sub class 'B' laid dry flat perpendicular to axis of cable for protecting complete all as specified and directed. |
| 8 | Supply and Spread Natural Riddled soil in trenches for cushioning and covering to cable complete all as specified and directed by Engineer-in-Charge. |
| 9 | S&F Straight hot shrink cable joint kit for LT ug cable of size 300 sqmm 3.5 core including excavation,refilling of earth work at undergruond cable fault position and making good surfac e at the fault position complete all as specified and as directed. |
| 10 | M&L for cutting road / hard standing/Plith Protection to depth not exceeding 60 CM and to width not exceeding 45 CM for laying HDPE Pipes and making good the disturbed surfaces by 1:3:6 type C1 using 20 mm graded stone aggregate complete all as specified and as directed by Engineer in charge . |
| 11 | S&F GI tubing light grade, 80mm dia in trenches for road crossing/laid in floors etc |
| 12 | Supply and install in repair MCCB, 4 pole, 415 v, adjustable type, 63 A Amp, 50 HZ, 36 KA including spreader links on both sides complete all as specified and directed |
| 13 | All as per item no.12 above but fixed type, 125 A and 16 KA. |
| 14 | Material and labour for PCC 1:4:8, type D2, using 40mm graded stone aggregate infoundation, filling and mass concrete for errection of poles complete all as specified and directed. |
| 15 | Material and labour for PCC 1:2:4, type B1, using 20mm graded stone aggregate as in coping of poles including necessary formwork etc complete all as specified and directed. |
| 16 | M&L earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground earth pit not less than 2.25m below ground level with top edge of earth plate not less than 1.5m below normal ground level, connected to galvanized iron strip 32x6mm as a earthing lead by means of bolts, nuts, checks nuts, washers etc made of galvanized of steel, earth strip including and protected by galvanized iron pipe(light grade) 40 mm dia from plate to Panel Board, galvanized iron pipe light grade 20mm dia bore and funnel watering including test point necessary excavation ,earth work, concrete pit M-10, CI cover, frame and funnel,Charchol dust,Salt all as specified in plate No 3 of SSR-1991(part-1) complete all as specified and as directed. |
| 17 | Taking down unserviceable Aluminium cable lug 300 sqmm and supply with fixing the same all as directed. |
| 18 | M&L for Overhauling of ACB units of any rating disconnecting and taking out from panel physically,testing of tripping and closing coils electrical spring charging unit checkout the all four terminals RYB and N cleaning with the blower greasing tightining the internal connections chanigng of nut bolts washers and refixing the same and carryout full testing all as specified and directed. |
| 19 | M&L one coat of grey/half white colour synthetic enamel spray paint after preparation of surfaces of existing LT panels/control switch boxes over 10 cm in width or girth complete all as specified and directed |
| 20 | M&L Surface dressing in hard/dense soil not exceeding 15 cm deep and cleaning all the grass weeds etc.all as specified and directed. Please Enable Macros to View BoQ information |
| 21 | M&L Surface dressing in hard/dense soil not exceeding 15 cm deep and cleaning all the grass weeds etc.all as specified and directed. Please Enable Macros to View BoQ information |
