|
| 1 | Surface dressing n exc 15 cm deep from sooft loose soil compelete |
| 2 | M&L for Sand filling under floors or in foundation including watering and consolidation for laying interlocking tiles complete all as specified and directed. |
| 3 | M&L for 75mm thick PCC type D2, 1:4:8 (using 40mm graded stone agg) as in sub base floor surface complete. |
| 4 | M& L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment in paths and hardstanding laid tightly over dry sand cushion (compacted) and joint filled with dry sand(colour and pattern as approved by GE) complete all as specified and directed.(Note: Sand will be measured and paid separatly). |
| 5 | M&L for Hardcore of broken bricks of guage not exceeding 63 mm, deposited,spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface. All as specified and directed. |
| 6 | M&L rendering 15mm thick in CM 1:4 on fair faces of brick work , finished even and smooth without using extra cement. |
| 7 | Taking down cement plaster of any description on brick or stone walls/concrete surface etc. including racking out joints, hacking for key, scrubbing down with water etc. |
| 8 | M & L, 10mm thick rendering on fair faces of brick work/concrete surface in CM (1:6) surface finished fair & even complete. |
| 9 | M & L preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of 1mm thick wall care putty complete. |
| 10 | M&L for applying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 ltr/10sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10sqm over a coat of plaster of paris putty of 1mm thickness on new plastered wall surfaces. |
| 11 | Demolition of Brick tiles or terracing tiles, single layer on roofs all as comp |
| 12 | M&L rendering 10 mm thick in CM 1:3 on fair faces of brick work/concrete surface using polymers based liquid water proofing compound as in roof. |
| 13 | Supply only liquid water proofing compound as per manufacture instruction. |
| 14 | M&L for applying evenly a tack coat of Industrial Bitumen 85/25 grade @ 1.20 Kg per SM meter as in roof complete all as per manufacturer instrcution . |
| 15 | M&L for laying APP based polymeric membrane with Aluminium painting minimum weighing 3kg/ sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) including bitumen primer @ 0.3 Kg per Sqm by torch application method (overlap while torching shall be 75 mm on length and 100mm width side). All angles & abutments should sealed with extra care to ensure full bondage and cutting out grooves where necessary as per manufacturers instructions. |
| 16 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n’exc1.5 Sqm and removing from site. |
| 17 | M/L Steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dove tailed or welded (including two nos tower bolts 125mm in each leaf and one nos MS flate iron 25x 3mm handle in each leaf. |
| 18 | M/L Steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete without glazing bars, dove tailed or welded (including two nos tower bolts 125mm in each leaf and one nos MS flat iron 25x 3mm handle in each leaf. |
| 19 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc1.5 Sqm but n.exc 4.00 Sqm each and removing from site. |
| 20 | M&L for Pressed steel frames 105 x 60 mm size of frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete. |
| 21 | M&L Providing, cement concrete type B0 1:2:4 (12.5 mm graded aggreate) in filling of pressed steel frame , coping, fixing of hold fast etc similar work. |
| 22 | S & F 100 mm Butt hinges medium weight medium cold rolled mild steel. |
| 23 | S&F 200 mm long aluminium anodised barrel tower bolt of extruded section complete. |
| 24 | S&F of 100 mm size aluminium handles cast type anodised. |
| 25 | S&F 250mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed. |
| 26 | M&L 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides covered with decorative face veneer with lipping / frame to match. |
| 27 | Taking up or taking down GI tubing and connections including cleaning for refixing or removal to store for the following sizes complete all as specified and directed |
| 28 | 50 mm dia |
| 29 | 80 mm dia |
| 30 | Supply and laying for galvanised iron tubing medium grade with and including all fittings such as bends, elbows, tees, short pieces, union etc in trenches complete all as specified and as directed of following sizes. All GI fittings like union, socket, elbow, reducer, tee, bend, etc of any size required for laying and fixing the GI pipe are deemed to be included in the rate quoted. |
| 31 | 50 mm dia |
| 32 | 80 mm dia |
| 33 | S & F for gun metal gate valve with iron wheel head screwed both ends ISI marked fixed to GI pipe including removal old unsv one complete all as specified and as directed of following sizes :- |
| 34 | 25 mm dia |
| 35 | 50 mm dia |
| 36 | S & F for gun metal Non return valve Horizontal/vertical type screwed both ends ISI marked fixed to GI pipe including removal old unsv one complete all as specified and as directed of following sizes |
| 37 | 50 mm dia |
| 38 | 80 mm dia |
| 39 | M & L for repairs to leakage/ damage/ blockage GI pipe of size 100/80 mm including carrying out repairs etc as required to make the system in order / functional and necessary excavation ,returning , filling of soils (Cost of JCB if required is assumed to be included in the rate quoted) and removal of water by using pump, cutting out GI pipe at both ends and jointing with new fittings, accessories such as union, sockets, reducer, mechnaical joint, nipple, Tee, Tee reducer etc complete all as specified and as directed by Engr-in-charge. (i) Rate inclusive of jointing, road cutting & earth work. (ii) GI fittings will be paid separately in respective items. |
| 40 | S & F for GI mechanical joint 100 mm dia |
| 41 | S & F for GI nipple 100 mm dia 1 feet long |
| 42 | S & F for GI socket 100 mm dia |
| 43 | M & L for connecting pieces one end flanged and other end socket or spigot and bell mouth pieces one end flanged other end tapering as bell mounth, CI Bends tapers, Tees, pieces (Single or double branch) any Type and angle / radius and straight connecting pieces for CI Pipe upto 150 mm bore complete all as specified and as directed. |
| 44 | M & L for repairs to leakage/ damage/ blockage GI pipe of size 40/50/80 mm dia including carrying out repairs etc as required to make the system in order / functional and necessary excavation ,returning , filling of soils and removal of water by using pump, cutting out GI pipe at both ends and jointing with new fittings, accessories such as union, sockets, reducer, nipple, Tee, Tee reducer etc complete all as specified and as directed by Engr-in-charge.(i) Rate inclusive of jointing & earth work. (ii) Cost of GI fittings is deemed to included in the rate quoted (iii) Pipe if replaced will be measured separately under respective item |
| 45 | M & L for burning out unsv/ leakage lead joint in position, including removing old lead including necessary excavation of soils, returning, filling and removal of accumulated water by using pump of following sizes complete all as specified and directed by Engr-in-charge.Note : (i) Rate inclusive of earth work. (ii) Lead joint will be paid separetly under respective items. |
| 46 | 80 mm dia |
| 47 | 100 mm dia |
| 48 | M & L for Run Lead joint in spigot and socket pipes and fittings of size 80 mm dia including necessary caulking the spun yarn as required complete all as specified. |
| 49 | M & L for Run Lead joint in spigot and socket pipes and fittings of size 100 mm dia including necessary caulking the spun yarn as required complete all as specified. |
| 50 | S & F Cast iron sluice valve with stainless steel spindle and cast iron hand wheel complying with IS:14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts & washers of required size & Nos complete including removing of old unsv one of the following bore sizes complete all as specified :- |
| 51 | (a) 100 mm dia |
| 52 | (b) 80 mm dia |
| 53 | Supply and Fixing cast iron body and brass gate heavy duty non return valve ISI marked ( NRV) both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts & washers of required size & Nos complete including removing of old unsv one of the following bore sizes complete all as specified :- |
| 54 | (a) 80 mm dia |
| 55 | Supply and fixing cast iron foot valve, ISI marked both end flanged with nut bolt washers and rubber gasket confirming IS 4038, installation, testing of following sizes complete all as directed and specified. All arrangements including removal of water from sump by using pump (if required) is to be arranged by contractor and cost is deemed to be included in the rate quoted. |
| 56 | (a) 80 mm dia. |
| 57 | M&L for construction of Brick Masonry Valve Pit, one Brick thick wall in cement mortar 1:4 on 100 mm thick PCC 1:4:8 (40mm graded aggregate) in Foundation, Rendering 15mm thick internally and externally upto 150mm below GL, providing 3.0mm thick MS Sheet Valve Pit Cover, welded with 40X5mm Flat Iron Frame alround including provision of Hinges, Handle and Locking Arrangement including one lock and two keys and 40 x 40 x 6mm Angle Iron Frame fixed on Top of Valve Pit by means of Holdfast 150mm long, embedded in PCC 1:2:4 (20mm graded aggregate) Block of size 230 x 200 x 100 mm, applying two coats of Anti-corrosive Paint over a coat of Red Oxide Zinc Chrome Primer after preparation of all exposed to Steel Surfaces including necessary Earth Work in Soft/Loose Soil and demolition of old unserviceable Valve Pit of size 900 x 900 x 900 mm (Internal Dimension) complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 58 | M&L for construction of Brick Masonry Valve Pit, one Brick thick wall in cement mortar 1:4 on 100 mm thick PCC 1:4:8 (40mm graded aggregate) in Foundation, Rendering 15mm thick internally and externally upto 150mm below GL, providing 3.0mm thick MS Sheet Valve Pit Cover, welded with 40X5mm Flat Iron Frame alround including provision of Hinges, Handle and Locking Arrangement including one lock and two keys and 40 x 40 x 6mm Angle Iron Frame fixed on Top of Valve Pit by means of Holdfast 150mm long, embedded in PCC 1:2:4 (20mm graded aggregate) Block of size 230 x 200 x 100 mm, applying two coats of Anti-corrosive Paint over a coat of Red Oxide Zinc Chrome Primer after preparation of all exposed to Steel Surfaces including necessary Earth Work in Soft/Loose Soil and demolition of old unserviceable Valve Pit of size 900 x 900 x 900 mm (Internal Dimension) complete all as specified and as directed. Please Enable Macros to View BoQ information |
