|
| 1 | Taking down old unserviceable LT UG Cable 6/10/16/25/50/120/185/240/400 Sqmm 2/3.5/4 Core from trenches complete all as specified and directed by engineer in charge . |
| 2 | Supply and lay LT under ground cable XLPE insulated armoured 1100V grade with multistranded aluminium conductor confirming to relevant IS in trenches, ducts, through pipes fixed to wall etc all as directed including cable gland, terminal socket and connecting up of size 400 sqmm 3.5 core including dismantling of old U/S cable. |
| 3 | All as per item ser No 1 above but of size 300 sqmm 3.5 core |
| 4 | All as per item ser No 1 above but of size 185 sqmm 3.5 core |
| 5 | All as per item ser No 1 above but of size 50 sqmm 3.5 core |
| 6 | All as per item ser No 1 above but of size 25 sqmm 4 core |
| 7 | All as per item ser No 1 above but of size 16 sqmm 4 core |
| 8 | All as per item ser No 1 above but of size 10 sqmm 4 core |
| 9 | All as per item ser No 1 above but of size 10 sqmm 2 core |
| 10 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep and getting out in hard/dense soil for laying/repair of cable. |
| 11 | Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25cm thick. |
| 12 | Removing excavated materials to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point. |
| 13 | Supply bricks of size 230 mm x 115 mm x 75 mm, sub class 'B' laid dry flat perpendicular to axis of cable for protecting complete all as specified and directed. |
| 14 | Supply and Spread Natural Riddled soil in trenches for cushioning and covering to cable complete all as specified and directed by Engineer-in-Charge. |
| 15 | S&F Straight hot shrink cable joint kit for LT ug cable of size 25/50 sqmm 3.5 core including excavation,refilling of earth work at undergruond cable fault position and making good surface at the fault position complete all as specified and as directed. |
| 16 | All as per item ser No 15 above but of size 10/16 sqmm 4 core |
| 17 | All as per item ser No 15 above but of size 185 sqmm 3.5 core |
| 18 | All as per item ser No 15 above but of size 300/400 sqmm 3.5 core |
| 19 | M&L for cutting road / hard standing/Plith Protection to depth not exceeding 60 CM and to width not exceeding 45 CM for laying HDPE Pipes and making good the disturbed surfaces by 1:3:6 type C1 using 20 mm graded stone aggregate complete all as specified and as directed by Engineer in charge . |
| 20 | S&F GI tubing light grade, 80mm dia in trenches for road crossing/laid in floors etc |
| 21 | All as per item ser No 20 above but 50mm dia |
| 22 | S&F Silicon rubber insulating tape with 25 mm width ,Weather and corrosion resistant all as specified and directed by engineer in charge . |
| 23 | M&L one coat of grey/half white colour synthetic enamel spray paint after preparation of surfaces of existing LT panels/control switch boxes over 10 cm in width or girth complete all as specified and directed |
| 24 | S&F selector switch for volt/amp meter including taking down the old U/S selector switches. Make : AE / MECO |
| 25 | S/F in repair current transformer coil ratio up to 800/5 Amps Class-1 insulation. Make:GEC/MEI/Crompton |
| 26 | Supply and fix phase LED indicator lamp with toggle switches including taking down of fused indicator lamp. |
| 27 | Supply and fix 0-500 volts Voltmeter including taking down unserviceable voltmeter as directed. Make: AE/MECO |
| 28 | Supply and fix Ammeter 0-400 Amp including taking down unserviceable ammeter .Make: AE/MECO Please Enable Macros to View BoQ information |
| 29 | Supply and fix Ammeter 0-400 Amp including taking down unserviceable ammeter .Make: AE/MECO Please Enable Macros to View BoQ information |
