|
| 1 | Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified. |
| 2 | Demolition of Concrete of any description and in any position not otherwise specially provided for complete all as specified. |
| 3 | M&L for plain cement concrete type D2 1:4:8 (40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified.. |
| 4 | M&L for plain cement concrete type B2 1:2:4 (40 mm graded stone aggregate) as in surface channels and drains complete all as specified.. |
| 5 | M&Lfor brick work with sub-class 'B' bricks, straight or curved on plan exc 6m mean radius built in In cement mortar 1:6 complete all as specified. |
| 6 | Extra for forming fair finished drain or channel 30 cm inner girth & above in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etcvcomplete all as specified. |
| 7 | M/L Providing cement concrete in lintels upto 1.5 m clear span, cills, steps: seismic and other similar bands, plinth courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, appex 1:2:4 type B-1( 20 mm graded stone aggregates)stones, bed plates as specified complete all as specified. |
| 8 | M&L for rendering 15mm thick on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing in CM 1:6 surface finished even and smooth without using extra cement complete all as specified |
| 9 | M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 with integral water proofing compound @ 3% of cement finished even and smooth without using extra cement complete all as specified..(Note :- WPC shall be supplied and paid separately in respective item) |
| 10 | Supplying only integral water proofing compound complete all as specified. |
| 11 | M&L100 mm thick Cement Concrete in sub base of floors type D-2, PCC 1:4:8 ( 40mmgraded stone aggregate ) complete all as specified. |
| 12 | M&L for M-35 Garde , 60mm thick factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould/rubber molded, laid in required colour & pattern over and including 25mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified. |
| 13 | All as per item No 12 above but except tiles |
| 14 | M&L factory made precast PCC solid block (1:2:4) type B-1 using 20mm graded stone aggregate as in kerb stone of size 300mmx300mmx150mm setting in cm (1:4) etc complete. |
| 15 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Re- inforced concrete) set in cement mortar 150 mm dia of pipe complete all as specified. |
| 16 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Re- inforced concrete) set in cement mortar 200 mm dia of pipe complete all as specified. |
| 17 | M&L for 150 mm bore reinforced cement concrete pipe , class NP-2 laid & jointed complete with collars in cm(1:1) with spun yarn & tested complete all as specified. |
| 18 | M&L for 200 mm bore reinforced cement concrete pipe , class NP-2 laid & jointed complete with collars in cm(1:1) with spun yarn & tested complete all as specified. |
| 19 | M&L for Plain cement concrete 1:3:6 type C2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore complete all as specified. |
| 20 | M&L for Plain cement concrete 1:3:6 type C2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 200mm bore complete all as specified. |
| 21 | Taking out existing stone slab manhole cover/soakagewell/septic tank in any situation/position and any thikness complete all as specified. |
| 22 | Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and getting out in soft/loose soil |
| 23 | Excavating in trenches, n. exc 1.5m wide and exceeding 1.5 m but n.exceeding 3m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and and getting outin soft/loose soil |
| 24 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm each in soft / loose soil. |
| 25 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified. |
| 26 | M&L for providing precast cement concrete Type B1 1:2:4 (20 mm graded aggregate) set in CM 1:4 for manhole cover complete all as specified. |
| 27 | S&F Mild steel bars TMT 10 mm dia and over, cut to length,bent to shape required, including cranking, bending spirally for hooping for coh, .nns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified. |
| 28 | S&F mild steel TMT bars 6 mm to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified.. |
| 29 | Cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required (200 mm) bore complete all as specified. |
| 30 | Cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required (150 mm) bore |
| 31 | Cleaning / clearing of sewage line 100mm to 150mm bore of any description, underground at any depth, removing any type of blockage including desilting, descaling & de-chocking of drains as well as manholes with combined high pressure water jetting cum suction (vaccum) type machine mounted on LCV / HCV and having facilities of high pressure vaccum and provision of hydraulic application through high pressure thermo plastic fiber based water jetting hose and conical round shape nozzle pipe/Cleaning done manually by labourer and flushing after cleaning including removing the same to a non inhabitant Area or buried into ground complete all as specified.Note: (i) Sewage line cleaned should function smoothly during entire contract period and measurement shall be made only once.(ii) Conractor shall be responsible to clear any further blockage without any extra payment till completion of work.(iii) The cost of this operation / provision shall be deemed to be included in unit rate quoted by the contractor. Also contractor will detail one sweepers daily from the date of commencement of work till completion of the work in the office of Engr-in-Charge to attend complaints as directed by Engineer-in-Charge, the cost of which shall also be deemed to be included in the said item. |
| 32 | Taking out sludge,debris,glass/ PVC bottle and any type garbage from choked sewage line of 200mm to 300mm dia including cleaning line with water and removal of same in closed vehicle out of MD land as specified |
| 33 | Cleaning of septic tank/soakage well manhole of any size & capacity by removing solid or semi solid sludge by mechanically or manually including removal of sludge in covered vehicle to a distance exc 2500m but n.exc3000m & buried in excavated pit of adequate size including excavation and covering with earth as directed by Engineer-in-charge(measurement of solid waste will be taken only after de-watering of tanks & dewatering shall be paid seprately) |
| 34 | Dewatering of septic tank/soakage well /manholesof any size, depth and capacity by manually or mechanically & removing water into nearly drain complete all as specified . |
| 35 | Cleaning of blockage EWC/IWC/urinal/bathroom & Kitchen cleaning including gully trap, Nahani trap& removing of sludge/spoil/waste to a distance exc 100mtr & testing of WC block for proper working after cleaning complete all as specified . |
| 36 | Desiliting and cleaning (taking out of debris/silt,rubbish etc) from heavily chocked drains in different locations of Sewar Fort and parade ground area by mechanical device as like super sucer and suction cum jetting /manually etc as directed by Engineer-in-charge |
| 37 | S&F as in repair vitreous china squatting pan (Orissa pattern) water closet (white) size 580mmx440mm with integral foot rests (excluding flushing cistern and flush pipe) complete including connection to trap and flushing pipe antisyphonage pipe etc including provision of PCC (1:7:12) type F2 in filling complete all as specified |
| 38 | Dismantling of old existing unserviceable WHB glazed and S&F new vitreous china wash hand basin, white, of size 550x400mm flat back excluding taps, waste, chain and plug but including brackets, cutting for and pinning in ends of brackets or erecting stand complete in repairs. |
| 39 | S&F in repair of 110 mm dia PVC(SWR) pipe single socketed in any length with rubber ring joints laid in trenches ,in floor including necessary clamps complete all as specified |
| 40 | S&F in repair of PVC bends any radius 110mm bore complete all as specified. |
| 41 | S&F 110 mm bore PVC cowls complete all as specified. |
| 42 | Dismantling and taking up or down the existing unserviceable GI pipe and M&L for new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors of following sizes :- |
| 43 | 15 mm bore |
| 44 | 20 mm bore |
| 45 | S&F facy type 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified. |
| 46 | S&F waste coupling brass chromium plated 32 mm bore with long screwed shanks and fly nuts including 32 mm PVC waste pipe for WHB complete all as specified. |
| 47 | S&F in repair of PVC low level flushing cistern 10 ltrs capacity with inlet ball valve float & handle, syphonic action type including brackets & flush pipe of polythelene of low or high density or PVC 32mm dia for LLFC complete all as specified. |
| 48 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiling to store and rubbish off the premisses complete all as specified. |
| 49 | M&L Glazed ceramic Tiles,in verticle surface 350X250X7mm/ 450X300X7mm set & jointed in neat cement slurry and pointed in white or colour cement to match the existing surface over and including 15mm thick rendering in CM 1:4 complete all as specified. |
| 50 | M&L for Coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm bur not exceeding 0.16 sqm, over 10 mm thick screed bed in CM 1:4 in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match to existing floor tiles in patches complete all as specified.. |
| 51 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground post embedded in natural ground complete all as specified. |
| 52 | Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil complete all as specified. |
| 53 | M/L Cement concrete in foundations filling and mass concrete Type C-2 1:3:6( 40 mm graded aggregates ) complete all as specified. |
| 54 | S&F MS work as in angle iron fencing post, fixed independently for fixing chain link fence, including all necessary cutting, drilling holes, bolting etc for screwing chain link fencing complete all as specified. |
| 55 | Supply only Chain link MS galvanisd fencing, any size or type complete all as specified. |
| 56 | Fixing only chain link fencing including line wires, any mesh size and type of standards rails straining barbs etc incl permission of binding wire including dismantling existing mesh of any size etc. |
| 57 | S&F screw bolts (machine made) with hexagonal or square head at one head and rounded the other or screwed both end each screwed end to be fitted with washers and one hexagonal or square nut exc 05 cm nexc 10 cm long dia of shank 05 to 10 mm complete all as specified. |
| 58 | M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. Please Enable Macros to View BoQ information |
