|
| 1 | Preparing the old painted surfaces of following steel furniture by removing old paint & touching up with Red oxide primer where necessary & denting where necessary & preparing the surfaces & spray / mannualy painting with two coat of synthetic enamel paint as per existing colour of articles all as specified & directed. NOTE : Spray painting shall be carried out mechanically. |
| 2 | (a) Almirah med steel W/S (FD-67, 1032) |
| 3 | (b) Almirah large steel W/S (FD-67, 1031) |
| 4 | (c) Almirah large steel 1/2S x 1/2H (FD-1033) |
| 5 | (d) Almirah Med steel 1/2S x 1/2H (FD-1034) |
| 6 | (e) Almirah MAP Steel (FD-1030) |
| 7 | (f) Book case steel (Glass door) (FD-90, 1028) |
| 8 | (g) Book shelf open small steel (FD-69/TP) |
| 9 | (h) Book shelf open large steel (FD-69(M)) |
| 10 | (j) Charpoy IP Steel Hardtop (FD/MAP-II/01) |
| 11 | (k) Charpoy Double Bunk (FD-112) |
| 12 | (l) Charpoy IP folding (FD-388 (R) |
| 13 | (m) Chair Steel W/O arms (FD- 75M ) |
| 14 | (n) Chair CB Steel W/Arm (FD- 75M ) |
| 15 | (o) Chair Varandah (FD-256/259) |
| 16 | (p) Chair Varandah (FD/E6/MAP/11) |
| 17 | (q) Chair writing (MAP) (FD/E6/MAP/12) |
| 18 | (r) Form without Back 1900mm (TP) |
| 19 | (s) Locker bed side steeel (FD-1029) |
| 20 | (t) Rack shoe steel (FD/E6/MAP/12 (R) ) |
| 21 | (u) Rack Side 3/4 Spaces Steel (FD-1023) |
| 22 | (v) Rack Steel (FD-1038 & TP) |
| 23 | (w) Stool Steel (FD-81,83 TP, 1028, 1026 ) |
| 24 | (x) Steel Locker Type 'A' (TP) |
| 25 | (y) Table 3' x 2' W/O drawer steel (FD-1007) |
| 26 | (z) Table 3' x 2' with drawer steel (FD-1008) |
| 27 | (aa) Table 900 X 500 with Steel legs (TP) |
| 28 | (ab) Table Office Offr Steel (FD-84,1003,1002) |
| 29 | (ac) Table Office Clerk Steel (FD-84 ,1004) |
| 30 | (ad) Table 1520X860X760MM Steel (FD-1010) |
| 31 | (ae) Table dinning ORs (FD-165M) |
| 32 | (af) Table bedside (FD/E6/MAP/15) |
| 33 | (ag)Teapoy verandah (FD-255) |
| 34 | (ah) Teapoy verandah (FD/E6/MAP/17) |
| 35 | (aj) Trestle Store Room Steel (FD-1043) |
| 36 | (ak) Bed hard steel (FD/E6/MAP/08(R) ) |
| 37 | (al) Desk 4' x 6\\" (FD-107) |
| 38 | (am) Student chair (TP) |
| 39 | (an) Student Table (TP) |
| 40 | (ao) Student table and chair (TP) |
| 41 | (ap) Bench steel 3 seater (TP) |
| 42 | M&L for applying apply Melamine polish upto the required gloss to the following wooden furniture including cleaning internally and externally including necessary preparation of surfaces & colour of polish all as directed by Engineer- in - Charge. |
| 43 | (a) Almirah large with shelves (DB-4116) |
| 44 | (b) Almirah medium with shelves (DB-4232) |
| 45 | (c) Almirah medium 1/2S x 1/2H (DB-3959) |
| 46 | (d) Book shelf open large (FD-13, DB-4121) |
| 47 | (e) Book shelf open small (DB-1121) |
| 48 | (f) Book case wooden (FD-237) |
| 49 | (g) Bin Solied lien (FD/E6/MAP/09 &07) |
| 50 | (e) Chair writing (FD-250, 280) |
| 51 | (f) Chair dining (FD-279) |
| 52 | (g) Chair Easy (FD-229) |
| 53 | (h) Chair Easy Cushioned (FD-358) |
| 54 | (j) Hat stand W/M (FD-233) |
| 55 | (k) Peg Table (FD-25,277) |
| 56 | (l) Teble centre (FD-274, 235) |
| 57 | (m) Teapoy FD (FD-232,278,382) |
| 58 | (n) Table writing (FD-24,249,275) |
| 59 | (o) Table 3' x 2' W/O drawer (FD-284,231,42) |
| 60 | (p) Table 3' x 2' with drawer (FD-41, 283, 224) |
| 61 | (q) Side board (FD-241,372,1112) |
| 62 | (r) Sofa Set 05 Seater (FD-281/373) |
| 63 | (s) Sofa Set 04 Seater (FD-281/373) |
| 64 | (t) Stool dressing (FD-282) |
| 65 | (u) Table Office Clerk (DB-4120) |
| 66 | (v) Table Office Officer (DB-4119) |
| 67 | (w)Table Center 2 Tier (FD-375) |
| 68 | (x) Table dining 6 Person (FD-273) |
| 69 | (y) Table dining 8 Person (FD-273) |
| 70 | (z) Table dressing ladies with stool (FD/E6/MAP/07) |
| 71 | (aa) Table dressing gents with mirror (FD-230) |
| 72 | (ab) Table dressing ladies with mirror (FD-251) |
| 73 | (ac) Table dressing gents with mirror (MAP) (FD/E6/MAP/16) |
| 74 | (ad) Table bedside W/o locker and drawer (FD-293, 95(M)) |
| 75 | (ae) Desk 4' x 6\\" (FD-107) |
| 76 | (af) Table 5' x 2'-10\\" (FD-289) |
| 77 | (ag) Table 600 x 600 mm (FD-293, 95 (M)) |
| 78 | Removing the existing unserviceable top from following Tables and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board including 4 mm thick Teak Wood beading alround the top. Colour of MDF board as approved by Engr - in- charge. |
| 79 | (a) Table dining 6 Person (FD-273) |
| 80 | (b) Table 600 x 600 mm (FD-293, 95 (M)) |
| 81 | (c) Table 5'X2'-10\\" (FD-289) |
| 82 | (d) Table Writing (FD-24,249,275) |
| 83 | (e) Table 3' x 2' W/o drawer (FD-284,231,42) |
| 84 | (f) Table Center 2 Tier (FD-375) |
| 85 | (g) Table 1520X860X760MM Steel (FD-1010) |
| 86 | (h) Table 3' x 2' with drawer (FD-41,283,224) |
| 87 | (j) Table Office Offr Steel (FD-84,1003,1002 ) |
| 88 | (k) Table Office Clerk Steel (FD-84 ,1004) |
| 89 | (l) Table Peg (FD-25,277) |
| 90 | (m) Table Center (FD-274, 235) |
| 91 | (n) Teapoy FD (FD -232,278,382) |
| 92 | (o) Table dining 8 Person (FD-273) |
| 93 | (p) Table 3' x 2' w/o drawer steel (FD-1007) |
| 94 | (q) Table 3' x 2' with drawer steel (FD-1008) |
| 95 | (r) Teapoy verandah (FD-255) |
| 96 | (s) Teapoy verandah (MAP) (FD/E6/MAP/17) |
| 97 | (t) Table 900 X 500 with Steel legs (TP) |
| 98 | Removing existing unserviceable planks and supply and fix 1st class hardwod planks of 25mm thick of existing size and shape with apropriate nutbolts as specified and as per drawing |
| 99 | (a) Form without Back 1900mm (TP) |
| 100 | (b) Desk 4' x 6\\" (FD-107) |
| 101 | Chair Easy Cushioned (FD-358) |
| 102 | (a) Removing of existing UNSV Foam and Cloth of Seat from Chair easy cushioned and supply and fix new 32 density Foam Cushion with cloth/ rexine all as approved and directed by Engr-In-Charge. |
| 103 | (b) Removing of existing UNSV Foam and Cloth of Back from Chair easy cushioned and supply and fix new 32 density Foam Cushion with cloth/rexine all as approved and directed by Engr-In-Charge. |
| 104 | (c) M & L for applying Melamine polish upto the required gloss to the following wooden furniture including cleaning internally and externally including necessary preparation of surfaces & colour of polish shall be as decided by Engr- in-Charge. |
| 105 | Chair Revolving Eecutive High Back (TP) |
| 106 | (a) Removing of existing UNSV Foam and tapestry Cloth/rexine of Seat from Chair Revolving Executive High Back and supply and fix new 32 density Foam Cushion with tapestry cloth/rexine all as approved and directed by Engr-In-Charge. |
| 107 | (b) Removing of existing UNSV Foam and tapestry Cloth/rexine of Back from Chair Revolving Executive High Back and supply and fix new 32 density Foam Cushion with tapestry cloth/rexine all as approved and directed by Engr-In-Charge. |
| 108 | (c) Removing of existing UNSV caster wheel from Chair Revolving High Back and S&F new caster wheel with the existing shape & size all as approved and directed by Engr-in-charge. |
| 109 | (d) Removing of existing UNSV Hydraulic Assembly from Chair Revolving High Back and S&F new Hydraulic assembly with the existing shape and size all as approved and directed by Engr-in-charge. |
| 110 | (e) Removing of existing UNSV Pedestal Assembly from Chair Revolving Executive High Back and S&F new Pedestal Assembly with the existing shape and size all as approved and directed by Engr-in-charge. |
| 111 | (f) Removing of existing UNSV hand rest from Chair Revolving Executive High Back and S&F new hand rest with the existing shape and size all as approved and directed by Engr-in-charge. |
| 112 | Chair Visitor (TP) |
| 113 | (a) Removing of existing UNSV Foam and tapestry Cloth of Seat from Chair Visitor and supply and fix new 32 density Foam Cushion with tapestry cloth/rexine all as approved and directed by Engr-In-Charge. |
| 114 | (b) Removing of existing UNSV Foam and tapestry Cloth of Back from Chair Visitor and supply and fix new 32 density Foam Cushion with tapestry cloth/rexine all as approved and directed by Engr-In-Charge. |
| 115 | (c) Removing of existing UNSV hand rest from Chair Visitor and S&F new hand rest with the existing shape and size all as approved and directed by Engr-in-charge. |
| 116 | Chair Conference (TP) |
| 117 | (a) Removing of existing UNSV Foam and Tapestry Cloth of Seat from Chair Conference and supply and fix new 32 density Foam Cushion with taperstry cloth/rexine all as approved and directed by Engr-In-Charge. |
| 118 | (b) Removing of existing UNSV Foam and Tapestry Cloth of Back from Chair Conference and supply and fix new 32 density Foam Cushion with taperstry cloth/rexine all as approved and directed by Engr-In-Charge. |
| 119 | (c) Removing of existing UNSV caster wheel from Chair Conference and S&F new caster wheel with the existing shape & size all as approved and directed by Engr-in-charge. |
| 120 | (d) Removing of existing UNSV Hydraulic Assembly from Chair Conference and S&F new Hydraulic assembly with the existing shape and size all as approved and directed by Engr-in-charge. |
| 121 | (e) Removing of existing UNSV Pedestal Assembly from Chair Conference and S&F new Pedestal Assembly with the existing shape and size all as approved and directed by Engr-in-charge. |
| 122 | (f) Removing of existing UNSV hand rest from Chair Conference and S&F new hand rest with the existing shape and size all as approved and directed by Engr-in-charge. |
| 123 | Chair Computer Revolving (TP) |
| 124 | (a) Removing of existing UNSV Foam and Tapestry Cloth of Seat from Chair Computer Revolving and supply and fix new 32 density Foam Cushion with tapestry cloth/rexine all as approved and directed by Engr-In-Charge. |
| 125 | (b) Removing of existing UNSV Foam and Tapestry Cloth of Back from Chair Computer Revolving and supply and fix new 32 density Foam Cushion with tapestry cloth/rexine all as approved and directed by Engr-In-Charge. |
| 126 | (c) Removing of existing UNSV caster wheel from Chair Computer Revolving and S&F new caster wheel with the existing shape & size all as approved and directed by Engr-in-charge. |
| 127 | (d) Removing of existing UNSV Hydraulic Assembly from Chair Computer Revolving and S&F new Hydraulic assembly with the existing shape and size all as approved and directed by Engr-in-charge. |
| 128 | (e) Removing of existing UNSV Pedestal Assembly from Chair Computer Revolving and S&F new Pedestal Assembly with the existing shape and size all as approved and directed by Engr-in-charge. |
| 129 | (f) Removing of existing UNSV hand rest from Chair Computer Revolving and S&F new hand rest with the existing shape and size all as approved and directed by Engr-in-charge. |
| 130 | Chair Writing MAP (FD/E6/MAP/12) |
| 131 | (a) Removing of existing UNSV Foam and tapestry Cloth of Seat from Chair Writing MAP and supply and fix new 32 density Foam Cushion with tapestry cloth/rexine all as approved and directed by Engr-In-Charge. |
| 132 | (b) Removing of existing UNSV Foam and tapestry Cloth of Back from Chair Writing MAP and supply and fix new 32 density Foam Cushion with tapestry cloth/rexine all as approved and directed by Engr-In-Charge. |
| 133 | (c) Removing of existing UNSV hand rest from Chair Writing MAP and S&F new hand rest with the existing shape and size all as approved and directed by Engr-in-charge. |
| 134 | Chair Computer MAP (FD/E6/MAP/01) |
| 135 | (a) Removing of existing UNSV Foam and tapestry cloth of Seat from Chair Computer MAP and supply and fix new 32 density Foam Cushion with tapestry cloth/rexine all as approved and directed by Engr-In-Charge. |
| 136 | (b) Removing of existing UNSV Foam and tapestry cloth of Back from Chair Computer MAP and supply and fix new 32 density Foam Cushion with tapestry cloth/rexine all as approved and directed by Engr-In-Charge. |
| 137 | (c) Removing of existing UNSV caster wheel from Chair Computer MAP and S&F new caster wheel with the existing shape & size all as approved and directed by Engr-in-charge. |
| 138 | (d) Removing of existing UNSV Hydraulic Assembly from Chair Computer MAP and S&F new Hydraulic assembly with the existing shape and size all as approved and directed by Engr-in-charge. |
| 139 | (e) Removing of existing UNSV Pedestal Assembly from Chair Computer MAP and S&F new Pedestal Assembly with the existing shape and size all as approved and directed by Engr-in-charge. |
| 140 | (f) Removing of existing UNSV hand rest from Chair Computer MAP and S&F new hand rest with the existing shape and size all as approved and directed by Engr-in-charge. |
| 141 | Chair Writing (TP) |
| 142 | (a) Removing of existing UNSV Foam and tapestry cloth of Seat from Chair Writing and supply and fix new 32 density Foam Cushion with tapestry cloth/rexine all as approved and directed by Engr-In-Charge. |
| 143 | (b) Removing of existing UNSV Foam and tapestry cloth of Back from Chair Writing and supply and fix new 32 density Foam Cushion with tapestry cloth/rexine all as approved and directed by Engr-In-Charge. |
| 144 | (c) Removing of existing UNSV hand rest from Chair Writing and S&F new hand rest with the existing shape and size all as approved and directed by Engr-in-charge. |
| 145 | Table Computer |
| 146 | (a) Taking out of unserviceable top from Table Computer and replace with new top of exterior grade Pre laminated MDF board 18/19 mm thick as per the existing size and shade all as approved and directed by Engr-in-charge. |
| 147 | (b) Taking out of unserviceable Keyboard tray from table computer and S&F new Keyboard tray of different type as per matching with the existing size and shape all as approved and directed by Engr-in-Charge. |
| 148 | (c) Taking out of unserviceable Telescopic Channel of drawer and S&F new telescopic channel with the existing size and shape all as approved and directed by Engr-in-Charge. |
| 149 | (d) Taking out of unserviceable Telescopic Channel of key board and S&F new telescopic channel with the existing size and shape all as approved and directed by Engr-in-Charge. |
| 150 | Table Office Officer Executive Type (TP) |
| 151 | (a) Taking out of unserviceable Top from Table office officer Executive type and S&F new top of exterior grade Pre laminated MDF board 18/19 mm thick as per trade pattern matching with the existing size and shade all as approved and directed by Engr-in-charge. |
| 152 | (b) Taking out unserviceable magnetic catcher from Table office officer Executive type and S&F new magnetic catcher as per trade pattern matching with the existing size and shape all as approved and directed by Engr-in-charge. |
| 153 | (c) Taking out of unserviceable drawer from Table office officer Executive type and S&F new drawer as per trade pattern matching with the existing size and shade all as approved and directed by Engr-in-charge. |
| 154 | (d) Taking out of unserviceable Telescopic Channel from the drawer of Table office officer Executive type and S&F new Telescopic channel as per trade pattern matching with the existing size and shape all as approved and directed by Engr-in-charge. |
| 155 | (e) Taking out of unserviceable Lock from Table office officer Executive type and S&F new Lock as per trade pattern matching with the existing size and shape all as approved and directed by Engr-in-charge. |
| 156 | (f) Taking out of unserviceable handle from Table office officer Executive type and S&F new handle as per trade pattern matching with the existing size and shape all as approved and directed by Engr-in-charge. |
| 157 | (g) Taking out of unserviceable door from Table office officer Executive type and S&F new door as per trade pattern matching with the existing size and shape all as approved and directed by Engr-in-charge. |
| 158 | Student Table (TP) |
| 159 | (a) Taking out of unserviceable Top from student table and S&F new top of exterior grade Pre laminated MDF board 18/19 mm thick as per trade pattern matching with the existing size and shade all as approved and directed by Engr-in-Charge. |
| 160 | Student Chair (TP) |
| 161 | (a) Taking out of unserviceable seat from student chair and S&F new seat as per trade pattern matching with the existing size and shape all as approved and directed by Engr-in-Charge. |
| 162 | (a) Taking out of unserviceable back from student chair and S&F new back as per trade pattern matching with the existing size and shape all as approved and directed by Engr-in-Charge. |
| 163 | Sofa Set 05 Seater (FD-281) |
| 164 | (a) Removing of existing UNSV Cushion with Cover of Seat/Back from Sofa Sets of Size 21\\"X22\\" and Supply new Cushion with Cover of 100 mm thick cushion 40 Density of Foam alongwith cover of tapestry cloth duly applied one side zip. Note : Tapestry Cloth shall be make of Bombay Dying/ Raymond Furnishing/ D'Decor (Tapestry cloth rate should be as per E-in-C branch letter No. 87139/E2 Design dt 05.02.1993). Colour of cloth shall be approved by Engr-in-Charge. Make of Foam : Sleepwell / Kurl-on. |
| 165 | Removing the existing torn out/unsv Tapestry cloth/Cushion complete from Seat and Back from Sofa Set 05 Seater and replacing with new cushion having 40 Density for seat and Back alongwith cover of with Tapestry cloth duly stiched with best thread. Note : Tapestry Cloth shall be make of Bombay Dying/ Raymond Furnishing/ D'Decor (Tapestry cloth rate should be as per E-in-C branch letter No. 87139/E2 Design dt 05.02.1993). Colour of cloth shall be approved by Engr-in-Charge. Make of Foam : Sleepwell / Kurl-on. |
| 166 | Removing the existing unserviceable shelves from following Steel Racks providing new shelves made with mild steel sheet, 1 mm thick, cut to size, shape etc duly welded and applying two coats of synthetic enamel paint over a coat of red oxide primer by sprayer complete. |
| 167 | (a) Rack Steel 7'x 3\\" x 3' x x1.3\\" with 5 shelves (TP) |
| 168 | (b) Rack Steel 7'x 3\\" x 3' x x1.3\\" with 9 shelves (TP) |
| 169 | Removing the existing unserviceable Back from the following Steel Racks with providing new Sides made with mild steel sheet, 1 mm thick, cut to size, shape etc duly welded and applying two coats of synthetic enamel paint over a coat of red oxide primer by sprayer complete. |
| 170 | (a) Rack Steel 7'x 3\\" x 3' x x1.3\\" with 5 shelves (TP) |
| 171 | (b) Rack Steel 7'x 3\\" x 3' x x1.3\\" with 9 shelves (TP) |
| 172 | Removing the existing unserviceable Sides from the following Steel Racks with providing new Sides made with mild steel sheet, 1 mm thick, cut to size, shape etc duly welded and applying two coats of synthetic enamel paint over a coat of red oxide primer by sprayer complete. |
| 173 | (a) Rack Steel 7'x 3\\" x 3' x x1.3\\" with 5 shelves (TP) |
| 174 | (b) Rack Steel 7'x 3\\" x 3' x x1.3\\" with 9 shelves (TP) |
| 175 | Steel Locker Type A (TP) |
| 176 | (a) Removing the existing unserviceable shelves from Steel locker type A providing new shelves made with 1mm thick mild steel sheet as per trade pattern matching with the existing size and shape and applying two coats of synthetic enamel paint over a coat of red oxide primer by sprayer complete and all as approved and directed by Engr-in-Charge. |
| 177 | (b) Removing the existing unserviceable Legs from Steel locker type A providing new legs made with 1mm thick mild steel sheet as per trade pattern matching with the existing size and shape and applying two coats of synthetic enamel paint over a coat of red oxide primer by sprayer complete and all as approved and directed by Engr-in-Charge. |
| 178 | (c) Removing the exsiting unservicable lock from Steel locker type A providing new lock as per trade pattern matching with the existing size and shape all as approved and directed by Engr-in-Charge. |
| 179 | (d) Removing the existing unserviceable Door from Steel locker type A providing new door made with CRCA steel sheet of 1mm thick as per trade pattern matching with the existing size and shape and applying two coats of synthetic enamel paint over a coat of red oxide primer by sprayer complete and all as approved and directed by Engineer-in-Charge. |
| 180 | (e) Removing the exsiting unservicable handle from Steel locker type A providing new handle as per trade pattern matching with the existing size and shape all as approved and directed by Engineer-in-Charge. |
| 181 | Note :- Schedule of Credit of Amount Rs. 17,209.00 shall be deducted from total amount. Please Enable Macros to View BoQ information |
