|
| 1 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 2 | S&F portions framed & hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed. |
| 3 | M&L for preparation of new or previously untreated steel or iron surfaces of any description over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 4 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each with and including including making good the disturbed surfaces as original with CM (1:6) or PCC (1:2:4) type B0 complete all as specified and as directed. |
| 5 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc 1.50 Sqm but not exc 4 Sqm each with and including making good the disturbed surfaces as original with CM (1:6) or PCC (1:2:4) type B0 complete all as specified and as directed. |
| 6 | S&F aluminium powder coated frame for doors, windows, ventilators and partation with one or more rebates including joining cleat for fixing etc complete all as specified and directed |
| 7 | S&F anodised powder coated aluminium door shutters (single / double leaf) aluminium section weighing 0.55kg/m including necessary joining cleats, al powder coated glazing clips, rubber neoprene packing, Al powder coated handles 2 Nos in each door, Al powder coated tower bolt 02 Nos, hinges 03 Nos, Al powder coated snap beading, screws, door stopper 01 No etc. complete all as specified. Note :- Glass pane and particle board shall be measured and paid seprately. |
| 8 | S&F anodised powder coated window and ventilator shutters in three track sliding (whichever the case may be ordered to sliding horizontally or vertically) with two or more shutters with sliding arrangement with two or more shutter rubber beading and glazing clips using aluminium sections weighing not less than 0.55 Kg/M inclusive aluminium handle / handle slot, locking arrangement etc complete all as specified and directed (Note :- Glass pane/wire mesh shall be measured and paid sepertely) |
| 9 | Supply only 4.0mm sheet glass, ordinary quality and fixed to aluminium window / ventilator shutters / steel windows etc complete all as specified and directed |
| 10 | Supply only stainless steel wire 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to aluminium window / ventilator shutters / steel windows etc complete all as specified and directed |
| 11 | Supply only 9 mm thick prelaminated particle board interior gde prelaminated both side with decorative choice lamination fixed with screws as in aluminium partation & aluminium door shutter etc all as directed. |
| 12 | M&L for cement concrete type B1 1:2:4 (using 20mm graded stone aggregates) in precast cover slabs for manholes cover and similar articles with plain faces etc set in cement mortar 1:4 including use and waste of formwork and including demoiltion of precast cover slab for manholes complete all as specified and directed |
| 13 | M&L for TMT bar 8mm dia and over cut to length bent to shape reqd incl cranking bending etc complete & binding with MS wire (annealed) not less than 0.9mm dia in reinforcement complete all as specified and directed. |
| 14 | Providing 25mm thick,using 12.5 mm graded stone aggregate precast cement concrete louvres and jallies,Type B0 1:2:4 setting in CM 1:6 including all mould- ings complete all as specified. |
| 15 | Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) un-reinforced cleaning the premises and removal of rubbish out side the MD land complete all as specified and directed. |
| 16 | M&L for precast concrete solid block masonry exc 10cm width with solid block of PCC (1:5:8) Gde D-5 and setting in CM 1:6 and including demolition of old brick work / Stone masonary / PCC block masonary built in cement morter of any description and removing of rubbish out side MD land complete all as specified and as directed. |
| 17 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish out side MD land complete all as specified and directed. |
| 18 | M&L for 75mm thick (1:3:6) Type-C1 (using 20mm graded crushed stone aggregate) as in plinth protection / path finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 19 | M&L for plain cement concrete (1:4:8) Type-D2 (using 40mm graded crushed stone aggregate) as in levelling course / sub base of flooring and foundation complete all as specified and directed. |
| 20 | M&L provinding cement concrete (1:2:4) B-1 using 20mm graded aggregate as in copings /haunching/ bearing course over brick walls etc and like complete all as specified. |
| 21 | M & L non skid ceramic coloured tiles 600X600 7 to 8 mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15mm thick screed bed of CM 1:6 complete all as specified and directed. |
| 22 | .Ditto but in skirting over and including 10mm thick backing coat in CM 1:3 complete all as specified and directed. |
| 23 | M&L for coloured glazed ceramic tiles in vertical surface 300X 450X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat of CM 1:3 complete all as specified. |
| 24 | M & L Non - skid ceramic coloured tiles,size 300x300x 7 mm thick laid on floor , over and including 15mm thick screed bed in cement slurry and pointed in white cement with pigment to match the shade of the tiles, complete all as specified and as directed. |
| 25 | M&L for rubber moulded glossy chequered cement concrete coloured tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 26 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 27 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed. |
| 28 | M&L 20mm thick granite (of any type) work table rubbed and pre polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite complete and ensure best adhesion to surface complete |
| 29 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 30 | M&L for machine cut cudappah stone slab 20-25mm thick for vertical supports of kitchen platforms and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing of the exposed face complete all as directed and specified |
| 31 | M&L machine cut kota stone slab flooring 20- 25mm thick over and including 20mm screed bed CM(1:4)cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 32 | Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish and including minor grindig complete all as specified and directed. |
| 33 | M&L rendering 15mm thick on stone masonary surfaces other than fair faces of brick surfaces work or stone surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 34 | M&L rendering 15mm thick in CM 1:4 on brick /stone surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 35 | M&L for preparation newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer of same make over external wall surfaces complete all as specified and as directed. |
| 36 | M&L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer of same make over a thin layer of wall care putty complete all as specified and directed. |
| 37 | M&L for preparing old plastered surfaces of walls and applying two coats of oil bound distemper over 1mm thick wall care putty including complete removal of existing treatment of any layer on wall complete all as specified and directed. |
| 38 | M&L for preparing old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed. |
| 39 | M&L for preparing old plastered or unplastered surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed. |
| 40 | M&L for preparing old plastered surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and directed. |
| 41 | M&L for preparation of old plastered surfaces of wall/ Ceiling by brooming / wire brushing / removal of loose scales / dusts / unwanted particles manually / mechaincally and applying one coat of white wash complete all as directed and specified. |
| 42 | M&L for preparing old plastered surface of walls and applying one coat of cement based paint complete all as specified and directed. |
| 43 | M&L for preparation of old steel surfaces of any description and applying one coat of synthetic enamel paint of selected colour complete all as specified and directed. |
| 44 | M&L for preparation of old wooden surfaces of any description and applying one coat of synthetic enamel paint of selected colour complete all as specified and directed. |
| 45 | DismantlingWall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet |
| 46 | M&L for 8 mm thick one side laminated gypsum ceiling board for false ceiling of size 600 x600x mm on GI powder coated grid work 60 cm x 60 cm with using 36.5 mm x 23.5 mm x1.5 mm thick main tee, 23.5 x 23.5 mm x 1.28 cross tee and 25 x 25x 1.5 mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 4.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 605 x 605 mm, complete all as directed and specified |
| 47 | S&F solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specificationsand drawing |
| 48 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. |
| 49 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick,AZ-150 grade of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantiling of sheets as in roofing/cladding as specified and directed |
| 50 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick,AZ-150 grade of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, bent to shape as required and directed fixed with self tapping screws including dismantling of sheets in roofing/cladding as specified and directed |
| 51 | S&F 2mm thick fibre glass reinforced translucent sheeting fixed with coach screw and washer in roof/wall cladding etc including dismantling of sheets as in roofing/cladding complete all as specified and directed. |
| 52 | Dismantling timber scantling, framed in post, rafters, purlines etc over 40 sqcm in section where necessary complete all as specified and as directed. |
| 53 | M&L for MS structural steel work, framed as in trusses purlins, rafter, post etc conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete all as specified and as directed, |
| 54 | S&F 15 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls & surface of roof slab with and including making good to required surfaces by using white cement and including taking up or down 15mm bore steel / composite / UPVC tubing and connection from any position concealed / exposed complete all as specified and directed. |
| 55 | S&F 20 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls, ceilings or laid in floors including taking up or down 20mm bore steel / composite / UPVC tubing and connection from any position concealed / exposed complete all as specified and directed. |
| 56 | S&F rotational moulded polythene water storage tank 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling of existing water tank of any capacity all as specified in SSR Part-I complete all as specified and directed. |
| 57 | S&F rotational moulded polythene water storage tank 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling of existing water tank of any capacity all as specified in SSR Part-I complete all as specified and directed. |
| 58 | S&F in repair vitreous china single piece pedestal pattern water closet white 'P' or 'S' trap, matching sheet cover and connection to trap . including making good to floor, complete all as specified. |
| 59 | S&F in repair 15mm bore chromium plated bib cock fancy type. Complete all as specified and directed. |
| 60 | S&F in repair 15mm bore chromium plated angle cock fancy type.Complete all as specified and directed. |
| 61 | S&F in repair Brass CP wall mixer 3-in-1 for mixing hot & cold water with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting legs & wall flange and fixed.Complete all as specified and directed. |
| 62 | S&F in repair brass chromium plated overhead shower 100mm round shape single flow with rubit cleaining system fitted to steel pipe or union complete.Complete all as specified and directed. |
| 63 | S&F in repair 15mm bore chromium plated pillar cock fancy type.Complete all as specified and directed. |
| 64 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.00 metre long flexible tube and wall hook including making connections and fixed in position complete all as specified.Complete all as specified and directed. |
| 65 | S&F in repair for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 10cm wide with chromium plated bracket guard and railing 60cm long. Complete all as specified and directed. |
| 66 | S&F in repairs chromium plated soap dish approximate size 120x 120x28mm complete all as specified and directed. |
| 67 | S&F in repair tubular towel rail, 20mm dia, D type, 60cm longv between flanges Complete all as specified and directed. |
| 68 | S&F in repair 2-way Bib cock with flange Complete all as specified and directed. |
| 69 | S&F 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed. |
| 70 | Supply and fixed in repair 20mm bore PVC brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as directed |
| 71 | Supply and fixed in repair 20mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete |
| 72 | S&F Stainless Steel Kitchen rack (Overall size 24x24x10”) complete all as specified and directed. Make : Cat No. P-310 of Prayag / Blue Star / Nirali |
| 73 | S&F in repair vitreous China, squatting pan, Orissa Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PTMT trap of suitable size ( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of cement concrete bedding & making good to floor complete all as specified and directed including taking out old one. |
| 74 | S&F in repairs 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as reqd complete all as specified and directed. |
| 75 | Supply and fixing in repair 600mm X 450mm bevelled edge mirror of selected quality mounted on plastic frame covered back with commercial and fixed on wooden plug with chromium plated brass screws and cup washer complete all as specified. |
| 76 | Supply and fixed in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to arf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm.Complete all as specified and directed. |
| 77 | Supply and fixed in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified. |
| 78 | S&F in repairs Vitreous China wash basin, white/coloured, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets and 32mm dia 1mtr long PVC waste pipe. |
| 79 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern & flush pipe) inclusing health faucet. |
| 80 | Dismantling cast iron work of any de scription and in any position |
| 81 | S& F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors |
| 82 | .ditto- but 75mm bore |
| 83 | S&F 110mm PVC (SWR) bands |
| 84 | S&F 75mm PVC (SWR)bands |
| 85 | S&F PVC(SWR) Nahani trap 75mm bore with SS grating with or without holes incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed. |
| 86 | S&F PVC (SWR) cowl 75/100mmdia as required complete |
| 87 | S&F 110mm bore PVC (SWR) junction double,(double T).equal or unequal with access door complete. Please Enable Macros to View BoQ information |
