|
| 1 | Supply of 98 Inch LED Display, 440 Typical nits, Full Array LED, Smart Android, 4K UHD, 24X7, Airplay/Chromcast, 5000:1 Contrast Ratio, 120Hz Refresh Rate, 32GB Storage, XR Triluminos Pro, Cognative Processor XR, 40W Speakers, HDR10, HLG, Dolby Vision, HDMI (4), Digital Audio Out (1), USB (2), Ethernet (1). |
| 2 | Supply of Steel Wall mount stand for above Display |
| 3 | Supply of PTZ Camera, Full HD Resolution: 1/2.8 inch high quality CMOS sensor. Resolution is up to 1920x1080 with frame rate up to 60 fps. Multiple Optical Zoom Lens: 20X optical zoom lens. Leading Auto Focus Technology: fast, accurate and stable auto focusing technology. Low Noise and High SNR: super high SNR image is achieved with low noise CMOS. Advanced 2D/3D noise reduction technology further reduces the noise while SUpply of ensuring high image clarity. Multiple video output interfaces: HDMI, SDI, USB 3.0, LAN. Simultaneously output: audio and video signal via HDMI, SDI and LAN. LAN interface supports PoE, USB 3.0 support dual code stream, SDI support transmission up to 100m under 1080p60 format Multiple Audio/Video Compression Standards: support H.264/H.265 video compression, up to 1920×1080 resolution 60 fps; support AAC, MP3 and G.711A audio compression, 8000, 16000, 32000, 44100,48000 sampling frequency USB 3.0 Support Dual Coding Stream: support main stream and sub –stream, and simultaneous output; support YUY2, MJPEG, H.264, NV12, H.265 video coding format Built-in Gravity Sensor: support PTZ auto-flip function and easy installation.Multiple Network Protocol: support ONVIF, GB/T28181, RTSP, RTMP, VISCA OVER IP, IP VISCA & RTMPS protocols; Support RTMP push mode, easy to be connected to streaming server (Wowza, FMS); Support RTP multicast mode; Control Interface: RS422 is compatible with RS485, RS232-IN, RS232-OUT, and the RS232 interface supports cascading. Multiple Control Protocol: support VISCA, PELCO-D, PELCO-P protocols; Support automatic identification protocols. Quiet Pan / Tilt Movement: with high accuracy step driving motor, camera can pan / tilt extremely quiet and smooth. Various remote controls: users can choose infrared remote control or wireless remote control according to the environmental conditions used. The 2.4G wireless remote control is not affected by angle, distance, and infrared interference. Support the remote control signal transparent transmission function, which is convenient for back-end equipment to use. AI Human Detection: built-in high-speed processor and advanced image processing and analysis algorithms, users can choose real-time tracking and regional tracking according to the environment. Makes- DVDO/AVER/VADDIO |
| 4 | Supply of camera mount for above camera |
| 5 | Supply of The fixed I/O DSP shall support Audio Video Bridging (AVB) digital audio networking that shall allow up to 128 x 128 channels. The AVB networking connection shall be implemented on a RJ-45 connector. The fixed I/O DSP shall support Ethernet connection for programming and control on a RJ-45 connector. The fixed I/O DSP shall have internal DSP processing. The fixed I/O DSP shall include 4 channels of General Purpose Input and Output connection (GPIO) for sending or receiving logic signals. The programming of the GPIO ports shall be software configurable. The fixed I/O DSP shall include a RS-232 connection for control data transmission into or out of the fixed I/O DSP and such operation shall be software programmable. The fixed I/O DSP shall include a Universal Serial Bus (USB) connection on a standard USB-B type connector. The fixed I/O DSP shall be software configurable to stream up to 8 channels of digital USB Class 1 Audio transmission either into or out of the fixed I/O DSP or simultaneous input and output. The fixed I/O DSP shall support port authentication via IEEE 802.1X. The fixed I/O DSP shall provide 12 balanced input connections for receiving of microphone or line level analog audio signals on screw-down, removable connectors. The input connections shall include Acoustic Echo Cancellation (AEC) hardware and firmware, the parameters, routing and operation of which shall be software programmable. The fixed I/O DSP shall provide 8 balanced output channels for the transmission of microphone or line level analog audio signals on screw-down, removable connectors. Each individual channel shall have its own dedicated connection. The fixed I/O DSP shall integrate to Voice Over Internet Protocol (VoIP) systems on a RJ-45 connector for two lines of VoIP communication and shall support Session Initiation Protocol (SIP) v2.0 or later. The fixed I/O DSP shall integrate to standard telephony communications on a RJ-11 connector for a single line of telephone communication. The fixed I/O DSP shall provide front panel OLED identification of device power, status, alarm, and activity as well as system-wide alarm. The fixed I/O DSP shall be rack mountable (1RU) and feature software-configurable signal processing, including but not limited to:signal routing and mixing, equalization, filtering, dynamics, and delay, as well as control, monitoring, and diagnostic tools. The fixed I/O DSP shall control devices. The fixed I/O DSP shall be CE marked, UL listed, and shall be compliant with the RoHS directive. Warranty shall be five years. Makes- Biamp/Symentrix/DVDO |
| 6 | Supply of Wall Mount Speaker two-way, 6.5-Inch or better IP64 rated Surface mounted loudspeaker, The loudspeaker shall be suitable for mounting on wall and include a 6.5 inch/165.1 mm driver and a 1 inch/25.4 mm tweeter in a 2-way design with coated paper woofer material and an IP rating of IP64. Both woofer and tweeter will be mounted in a 5° down tilt angle into the cabinet. Shall include a transformer with multiple taps of 60 - 30 - 15 - 6 watts at 100v and 60 - 30 - 15 - 7.5 - 3 watts at 70v. Shall have a dynamic power of at least 200 watts and the low impedance connection, Shall present a load of 16 ohms to the amplifier. The output sound pressure level at a distance of 1m with 1watt input level applied shall be at least 90 dB, The maximum output sound pressure level at a distance of 1m with full power applied shall be at least 110 dB. The loudspeaker shall have a frequency response of at least 65 - 20kHz. Shall have Nominal Beamwidth (H x V) 100° x 50° or better, Sensitivity of 87db or more & Max SPL of 118 dB peak or better. Makes- Biamp/L-Accosutic/Zycoo |
| 7 | Supply of Amplifier shall provide 4 output channels and a total of 300 W output power. The amplifier shall provide output channels individually configurable for driving up to 150 W per channel into a per channel selectable loudspeaker load including 4 ohm, 8 ohm, 70V, and 100V options. The amplifier shall feature a high pass filter at 70 Hz that can be manually switched on and off per output channel. The amplifier shall support 4 analog, line level, balanced inputs for the reception of signal. The amplifier shall provide input and output channels on Euroblock connectors. The amplifier shall provide LED identification of signal, limiting, and temperature for each channel. The amplifier shall provide control of power state as well as mute all outputs via logic inputs. The amplifier shall provide monitoring of power state and health via logic outputs. The amplifier shall support being surface mounted onto a wall or under a table with included hardware. The amplifier shall also be half-rack width and be rack mountable as a single unit or in pairs and fit in one rack unit (1U) with included hardware. The amplifier shall feature a standby operation that is enabled when no signal is present and shall leave the standby state when signal is present again. The amplifier shall be CE marked, UL listed and shall be compliant with the RoHS directive. Warranty shall be 5 years. Makes- Biamp/L-Accosutic/Zycoo |
| 8 | Supply of Wireless Handheld Mic, Operating Frequencies F-Band: 824 - 831 MHz, 863 - 865 MHz,Frequency Response 60 Hz - 16 kHz,Operating Range 60m,Condenser Cardioid,Sensitivity 10dBµV (S/N 60dB @ 20 kHz deviation),Makes- Audio Technica/Sennheiser/Shure |
| 9 | Supply of Digital Conference Control unit /Server. Should have minimum 3 x Conference Network Ports (RJ45) or better, 1 x LAN Port, 1 x Balanced XLR audio input, 1 x Balanced XLR audio output or more, Should have internal / External Conference recording capablity, Camera Control integration capability. Controller Must have Dante / AES67 interface. Power supply should be from same OEM.Server Should be able to drive chairman/delegate units mentioned in the tender with the help Extension unit and power supply unit. Intel® Core™ i7-12700 Processor (2.1 GHz, up to 4.9 GHz w/Boost, 25 MB cache, 12 core, 65W), 16 GB (2 x 8 GB) DDR5 4800 SODIMM Memory, 256 GB PCIe 4x4 2280 Value M.2 SSD, 2x 1 Gbps Ethernet adapters, Approved Makes: Televic/ Brahler/ Marconi technology/ DPA |
| 10 | Supply of Goosenck Mic Table top Delegate Discussion Unit with removable Gooseneck microphone. Microphone lenght: 360mm or better. Microphone must have led indicator. Microphone Should have USB-C port Connection /Mini USB/ Screw lock 5-Pin/ Din-Pin conncetor. Delegate Discussion Should have built-in Digital Signal Processing. Unit should provide Priority to speak to chairman. Audio quality : 16 bit digital or better.Speaker: minimum 4W or better.Frequency response: 25 Hz-15,000 Hz or better. 3.5 mm stereo jack socket for headphones output with volume adjustment. Connectivity: Concealed conference bus connections. 2 x RJ 45 ethernet port (IN/OUT - interchangeable). Loop through, daisy-chain cabling (non-proprietary). Unit with Bi color bar indicatorConnectivity: Concealed conference bus connections, 2 x RJ 45 ethernet port (IN/OUT - interchangeable), Loop through, daisy-chain cabling (non-proprietary).Compatible screw lock microphone connectivity. Certification: CE; BIS. Approved Makes: Televic/ Brahler/ Marconi technology/ DPA |
| 11 | Supply of Goosenck Mic Table top Chairman Discussion Unit with removable Gooseneck microphone. Microphone lenght: 360mm or better. Microphone must have led indicator. Microphone Should have USB-C port Connection /Mini USB/ Screw lock 5-Pin/ Din-Pin conncetor. Chairman Discussion Should have built-in Digital Signal Processing. Unit should provide Priority to speak to chairman.Priority button silences all delegate microphones and allows only the chairperson to speak. Audio quality : 16 bit digital or better.Speaker: minimum 4W or better.Frequency response: 25 Hz-15,000 Hz or better. 3.5 mm stereo jack socket for headphones output with volume adjustment. Connectivity , Concealed conference bus connections. 2 x RJ 45 ethernet port (IN/OUT - interchangeable). Loopthrough,daisy-chaincabling (non-proprietary). Unit with Bi color bar indicatorConnectivity: Concealed conference bus connections, 2 x RJ 45 ethernet port (IN/OUT - interchangeable), Loop through, daisy-chain cabling (non-proprietary).Compatible screw lock microphone connectivity. Certification: CE; BIS. Approved Makes: Televic/ Brahler/ Marconi technology/ DPA |
| 12 | Supply of Matrix Switch 4x 2 Matrix Swicher , HDMI 2.0, HDCP 2.2 / 1.4 Video resolutions up to 4K2K@60Hz (YUV 4:4:4) Supports 18Gbps video bandwidth 4K -> 1080p downscaling Audio de-embedding with optical & analog L/R outputs (both outputting audio from the same HDMI input) ARC (Audio Return Channel) HDMI audio formats include PCM2.0/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD Support Dolby Vision, HDR 10+, HLG Advanced EDID management (AUTO/COPY/STD) Control via front panel buttons and IR remote control Makes- DVDO/Lightware/Extron |
| 13 | Supply of HDMI Popup Box with USB C and Power |
| 14 | Supply of HD BaseT Extender, HDMI AT 4K60 OVER ETHERNET (RX) (70M), Compliant with HDMI 2.0b and HDCP 2.3, 18Gbps video bandwidth & HDBaseT 3.0 Video resolution up to 4K2K@60Hz (YUV 4:4:4)Uncompressed video transmission up to 230ft/70m for 4K@30Hz & 1080p signals or 131ft/40m for 4K@60Hz signals over a single CAT6A/7 cable Tx includes 1 x HDMI and 1 x USB-C inputs, 1 x HDBT output, 1 x USB 2.0 host and 3 x USB 2.0 clients Rx includes 1 x HDMI output, 2x USB 2.0 clients USB-C and HDMI signal inputs support auto or manual switching mode Auto switching supports HDMI 5V or signal detect selection USB-C supports DP-ALT mode for A/V, USB 2.0 data and power charging up to 60 watts Tx/Rx USB-A client ports VBUS on or off depends on whether the USB host is connected HDR, HDR10, HDR10+, Dolby Vision LLM and HLG pass-through 4K to 1080p downscaling through HDMI output Both Tx and Rx support analog audio de-embedding RS-232 signal pass-through and guest-mode control Bi-directional IR pass-through, USB 2.0 signal transmission Advanced EDID management Each USB-A port provides power up to 5V/500mA Bi-directional 24V POC, with POC switch Makes DVDO/Lightware/Extron |
| 15 | Supply of Touch panel controller with 3 bidirectional RS-232 ports, 2 unidirectional RS-232 ports, 4 built-in assignable relays, 8 GPIO; PoE powered (IEEE 802.3at Class 3, 15W), controller utilizes an Ethernet network via an RJ-45 connector for software configuration and control. The controller includes 3 bidirectional RS-232/IR port for controlling third party devices with feedback functionality; 2 unidirectional RS-232/IR ports for controlling third party devices; 8 general purpose input/output (GPIO) connections for sending or receiving logic signals; LAN control for 10 devices; and 4 assignable relays. The controller connects to and operates up to 5 touch panel interfaces. The controller’s connections and operations are externally configurable. The controller is powered by PoE (IEEE 802.3at Class 3, 15W), and includes a PoE OUT connector to power an external device such as a touch panel.CE marked, UL listed, and compliant with the RoHS directive, Makes-Biamp/Lightware/Extron |
| 16 | Supply of The touch panel shall utilize an Ethernet network via an RJ-45 connector for networking as well as software configuration and control. The touch panel shall include a 10” capacitive touch high contrast LCD for function selection. The touch panel shall be made from PVC/ABS material with UV protection additive. The touch panel shall include sensors that detect ambient light levels and adjust display brightness automatically. The touch panel shall be powered by PoE (IEEE 802.3at Class 3, 15W). The touch panel shall be CE marked, UL listed, and compliant with the RoHS directive. Warranty shall be five years, Makes- Biamp/Lightware/Extron |
| 17 | Supply of Table stand for touch panels |
| 18 | Supply of 8” LCD 4:3 1024×768 Room Booking /Scheduling system, The meeting room display shall include a 8-inch capacitive touch display with anti-fingersprint treatment. The product shall include a 3-way indirect light aura to make room status visible from a distance. The meeting room display shall support power over internet (PoE) or 12V AC/DC power adapter. The meeting room display shall include a proximity sensor to unfold detailed information as you approach the display. The meeting room display shall include support for RFID cards. The meeting room display shall be a self hosted system. The meeting room display shall include mounting options for both standard walls and glass walls. The meeting room display shall provide 23 different user interface languages. The meeting room display shall be CE marked, UL listed, and compliant with the RoHS directive. Makes- Biamp/Extron/Crestron |
| 19 | Supply of 24 port Network Switch for control |
| 20 | Supply of Access Point |
| 21 | Supply of The BYOM room solution shall be designed to allow multiple session participants to directly share as well as receive content from their compatible computing devices. The BYOM room solution shall be designed to connect the in-room audio and video USB and HDMI peripherals to the users’ compatible computing devices via the use of custom USB drivers to be selected in UC platforms (soft codecs). The BYOM room solution shall connect to AV peripherals via a Universal Serial Bus (USB) connection using a standard USB connector. The BYOM room solution shall be equipped with one High-Definition Multimedia Interface (HDMI) port on the rear panel. The BYOM room solution shall connect toa network via an RJ-45 connector or via a direct wireless connection (WiFi Access Point) to allow participants usingclient devices to join a shared session. The client devices shall operate using Windows, Mac OS X, iOS or Android operating systems and shall have installed MAX client software and / or device native casting protocols, internet browser, or an HDMI port. The BYOM room solution shall be CE marked, UL listed, and compliant with the RoHSdirective. Warranty shall be five years. Makes Biamp/Lightware/Extron. |
| 22 | Supply of 2 Mtr HDMI Cable |
| 23 | Supply of 10 Mtr HDMI Cable |
| 24 | Supply of USB 3.0 A (M) to B (M) Cable |
| 25 | Supply of 12U AV Rack with all accessories |
| 26 | Supply of Speaker Cable 22 AWG |
| 27 | Supply of Connectors and Accessories (Lumpsum) |
| 28 | Installation, Configuration, testing and commsisioning |
| 29 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate,suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C . |
| 30 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch . |
| 31 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 A socket outlet. |
| 32 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 33 | POWER POINT- Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. |
| 34 | Supplying and fixing of 20 mm of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 35 | Invertor wiring-Supplying and drawing 1x1.5 sq.mm of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 36 | Supplying and drawing 3x2.5sq.mm of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 37 | Supplying and drawing 3x4sq.mm of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 38 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.1 run of cable. |
| 39 | Supplying and fixing 5 amps to 32 amps rating, 240 volts, 'C' curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 40 | Supplying and fixing 63 A, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 41 | Supplying and fixing 6 way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 42 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.16 sq. mm 4 core. Please Enable Macros to View BoQ information |
