Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenchces for foundations, drains, etc inclusinf dressing of sides and ramming of bottons lift upto 1.5 m, including getting out excavated earth and its disposal of excavated earth with kead of 50 mtr oridnary Rock |
| 2 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 m All kinds of soil |
| 3 | Providing & Laying of stone soling (dully hand packed) including watering, dressing and ramming with all carriages loading un-loading and stacking etc complete |
| 4 | Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level (1:4:8 coarse sand 40mm nominal size crushed stone agg.) |
| 5 | Providing and laying in position specified grade of reinforced cement concrete excld. The cost of centring, shuttering, finishing and reinforcement-All work upto plinth level (1:1.5:3 graded stone agg. 20mm nominal size) |
| 6 | Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level (1:2:4 coarse sand crushed stone agg. 20mm) |
| 7 | Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level (1:3:6 coarse sand crushed stone agg. 20mm) |
| 8 | R.C.C. work in walls, incld. Attached pilasters, buttresses plinth & string courses, coloums, pillars abts posts and struts etc upto floor 5 level excld. cost of cewntering, shuttring fincshing and reinforcement 1:1:5:3 graded crushed stone agg 20 mm nominal size |
| 9 | Reinforced cement concrete work in walls, incld. attached pilasters, buttresses, plinth & string courses, columns, piers, abts, posts and struts etc upto floor 5 level excld. Cost of centring, shuttering, finishing and reinforcement 1:1.5:3 graded crushed stone agg. 20mm nominal size |
| 10 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form work for Columns, piers, abutments, pillars, posts and struts |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access platforms |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form work for Lintel, beams, plinth beams, girders, bressumers and cantilevers |
| 15 | Supplying and Filling in Rooms Using Nallah Muck including Levelling, watering, ramming and Consolidation including Carriage Complete |
| 16 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in 1:6 coarse sand (1 cement : 6 coarse sand) |
| 17 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 18 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (second class Kail wood) |
| 19 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge (second class Kail wood) 35mm thick |
| 20 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion of inside grooves or rebates to be measured). Panelling for penelled or panelled and glazed shutters 25 mm to 40 mm thick. Decorative plywood both side decorative veneer (type 1) conformingh to IS 1328 BWR type |
| 21 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4.0 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws (second class Kail wood) 30mm thick Shutters |
| 22 | Providing & fixing 35mm thick wire gauze shutters using galvanised MS wire gauze of 1.4mm dia 0.63mm for doors & windows and clerestory windows incld bright finished/black enamelled M.S Butt hinges with necessary screws second class Kail wood |
| 23 | Providing and fixing of glass panes 3.5–4 mm thick clerestory window shutters (Area of opening for glass panes excld portion inside shall be measured) including Necessary beading and nails complete |
| 24 | Providing and fixing of Pinjra Kari Heritage type work as per approved pattern/design of 1st class Kashmiri local budloo wood complete job including Beading & necessary nails (Jaffery Work) |
| 25 | Providing & fixing of 40x5mm flat iron hold fast 40cm long including fixing to frames with 10mm dia bolts nuts & wooden plugs |
| 26 | Providing hardware items for Doors and Windows of standard make as per directions of EIC Aluminum Tower Bolt (4'' Inch) |
| 27 | Aluminum Handles (4'' Inch) |
| 28 | Aluminum Tower Bolt (8'' Inch) |
| 29 | Aluminum Handles (12'' Inch) |
| 30 | Providing and Fixing of L Drop of Standard make including Locking system complete |
| 31 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 32 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 33 | Providing ridges or hips of width 60cm overall width plain G.S sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 34 | Providing valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 1.00 mm thick with zinc coating not less than 275 gram/m2 |
| 35 | Providing and fixing aluminium Composite sheet cladding (exterior grade) in vertical/horizontal surface using 4mm thick sheet (Aluco Band) make/trade mark. The sheet shall be bent to shape profiles as required including perimeter extrusion base frame extruded stiffeners 2.5mm to 3mm, ss expansion fastners and silicone sealant (Dow Corning 7890 all back up arrangements required for installation as per EIC |
| 36 | 15mm Cement Plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) |
| 37 | 12mm Cement Plaster of mix 1:6 (1 cement: 6 fine sand) |
| 38 | 6mm Cement Plaster to celing of mix 1:3 (1 cement: 3 fine sand) |
| 39 | Cement Concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone agg) finished with floating coat of neat cement incld. cement slurry but excld the cost of nosing of steps etc complete 50mm thick with 20mm n/s stone agg crushed |
| 40 | Providing and laying Ceramic glazed floor tiles 300×300 mm of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1:4 including pointing the joints with white cement matching complete. All Colours |
| 41 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 42 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600×600 mm |
| 43 | Providing and fixing A Class imported wooden flooring (3D type) laminated of standard make tongued & grooves fixing on foam with proper resin material as per sample MF-84 including all fittings, fixtures, cornices and carriages complete job |
| 44 | Providing and laying gang saw cut of specified thickness, mirror polished pre moulded and pre polished machine cut granite stone of required size and shade of approved shape, colour and texture in footpath, flooring, cut granite stone of required size and shape of approved shade, colour and texture in skirting, risers of steps and dados in different locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge (18 mm thick) |
| 45 | Stone tile work for wall lining upto 10m height with special adhesive like araldite or equivalent over 12mm thick bed of cement mortar 1:3 including pointing in white cement with an admixture of pigment to match the stone shade 8mm thick (mirror polished and machine cut edges) two or more shades with skirting of desired pattern including all carriages lead and lift |
| 46 | Providing & fixing 04 layer 18 gauge (304) plain stainless steel railing of approved make like Jindal including master pillar and booster on alternate steps or equivalent including welding, polishing as per directions of engineer incharge complete |
| 47 | Providing and fixing of Wooden wall panelling including cost of nails, adhesive, all fittings all complete with triangular wooden moulded corner beading at the junction of panelling including providing basework of 12mm thick ply board sheeting complete |
| 48 | Varnishing with varnish of approved brand and manufacture: Two or more coats of glue sizing with copal varnish over and under coat of flatting varnish |
| 49 | Providing and fixing of framework of 12mm ply board sheeting including all necessary nails, adhesives, all fittings complete |
| 50 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood including cost of framework which is to be paid separately, Paarch finishing including all carriages |
| 51 | Providing and fixing of 12mm ply board sheeting base for khatambandi ceiling including all necessary items, nails, tower bolts, adhesives, all fittings complete job |
| 52 | Providing and fixing in position collapsible steel shutters with vertical channels 20x20x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia. steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. |
| 53 | Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete. |
| 54 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in 1:4 coarse sand (1 cement : 4 coarse sand) |
| 55 | Providing and laying chisel undressed Baramulla Stone (Joists) of size 300 mm face with 50 mm depth upto plinth level |
| 56 | Providing and laying of chisel Devri Dressed Stone of required size with an average depth of 85 mm depth upto plinth level including curing. One face dressed |
| 57 | Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) Flush/Ruled Pointing |
| 58 | Providing and fixing of Copper Steamer of 250 Ltr Capacity including all necessary fittings and fixtures complete job including all Carriages |
| 59 | Providing and fixing of kitchen Cabinets using HDHMR 18mm thick Boards including cost of adhesives, hinges shockers, nails, beadings laminates utensil drawers and handles locks all complete as per directions of Engineer in IC |
| 60 | Supply and installation of complete wardrobe including framework, shelves, drawers, rods, doors, glazed doors, door hardware, accessories and the wardrobe framework will be constructed using 19mm thick plywood with necessary lining, necessary shelves and SS hanging rods, the shutters will be made of 25mm thick pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked exterior grade (Type II) having one side decorative lamination and other side a balancing lamination of glazed shutters all as per directions of Engineer incharge complete. |
| 61 | Sanitory Providing and fixing water closet squatting pan (Indian type W.C pan) with 100 mm sand cast iron P or S trap, 10 liter low level white P.V.C flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: white vitreous china Orissa pattern W.C pan of size 580x440 mm with integral type foot rests |
| 62 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C pan with ISI marked white solid plastic seat and lid. |
| 63 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank, including ball cock valve |
| 64 | Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required |
| 65 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in-charge. Internal work-exposed on wall with clamps at 1.00 meter spacing PN-16 pipe, 16mm OD (SDR-7.4) 15mm dia nominal bore |
| 66 | PN-16 Pipe, 32 mm OD(SDR-7.4) |
| 67 | Providing and fixing C.P brass bib cock of approved quality (15 mm nominal bore) |
| 68 | Providing and fixing C.P brass angle valve of approved quality conforming to IS;8931 (15 mm Nominal Bore) 600x450 mm with singgle 15 mm C.P brass pillar taps |
| 69 | Providing and fixing wash basin with C.I. brackets, 32mm C.P brass waste of standard pattern, including painting of fittings and making good the walls wherever required white vitreous china wash basin size 630x450 mm with a pair of 15 mm C.P brass pillar taps |
| 70 | Providing and fixing brass mixer of approved quality 15 mm nominal jaquar/hindware |
| 71 | Stainless steel hanger |
| 72 | Providing and fixing PTMT liquid soap dish holder having length of 138 mm, breadth 102 mm, height 75 mm with concealed fitting arrangements, weighting not less than 106 gms |
| 73 | Providing and fixing PTMT grating of approved quality and colour 150 mm nominal size square 100 mm diameter of inner hinged round grating |
| 74 | Providing and fixing Exhaust Fan of approved quality and make 8 inch including making of surface and fixing all complete |
| 75 | Providing and fixing C.P brass health faucet of approved quality (15 mm nominal bore) |
| 76 | Providing and fixing C.P Ball Valve of approved quality (32 mm nominal bore) |
| 77 | Providing and fixing of 50 Ltr Solar Geyser of approved quality and make including all accessories, inlet/outlet connections, fittings complete |
| 78 | Providing and fixing of Connection Pipes of approved quality and make |
| 79 | Providing and fixing 600x450 mm beveled edge mirror of superior glass complete with 6 mm thick hard board ground fixed to wooden cleats with C.P brass screws and washers complete |
| 80 | Providing and fixing C.P brass overhead shower 8\\"x8\\" of approved quality conforming to IS: 5891 (15 mm nominal bore) |
| 81 | Providing and fixing of various PVC sanitary fittings Door Tee 4'' |
| 82 | Door Tee 3\\" |
| 83 | Reducer T (4''/3'') |
| 84 | Collaer 4\\" |
| 85 | Collaer 3\\" |
| 86 | Plain Bend 4\\" |
| 87 | Plain Bend 3\\" |
| 88 | Floor Trap |
| 89 | Door Dend 4\\" |
| 90 | Door Bend 3\\" |
| 91 | Plain Tee 4' |
| 92 | Plain Tee 3\\" |
| 93 | Cliff |
| 94 | Providing and fixing soil, waste and vent pipes IS 13592 & fittings (IS: 14735 ) suitable to rubber ring joints , which includes bends, rubber ring, jointing, junctions, clean out plug , cowls, offsets, collar, M.S holder-bat clamps, access pieces, trap of self cleansing design .etc. complete including jointing. 100 mm dia |
| 95 | 75 mm dia. PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type-B |
| 96 | Construction of 9\\" thick brick masonary manholes in cement mortar (1:4) mix, foundation cement concrete ( 1:4:8) ,12 mm thick inside cement plaster with finishing, making channels in cement concrete ( 1:2:4) incl. cost of manhole covers PVC ISI mark with frame size ( 1'-6\\" x1'-6\\" x 1'-6\\") inside size |
| 97 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 98 | Kota stone slab flooring 25 mm thick over 20mm thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 |
| 99 | Providing & Fixing 25mm medium class PVC conduit(Anchor/Ravindra or equivalent) along with accessories in surface or recessed |
| 100 | Providing and fixing of light Deep box in slabs of standard make and size along with accessories |
| 101 | Providing and fixing of fan Deep box in slabs of standard make and size along with accessories |
| 102 | Carriage of materails By Mech.Transport,from source to site of work Stone agg. (20mm) for avg lead of 40 km Qty Vide item No. 4, 5, 6 8 and 9 |
| 103 | Sand for avg lead of 55 km Qty Vide item No. 3, 4, 5, 6 8, 50 and 9 |
| 104 | Bricks for avg lead of 32 km Qty Vide item No. 15, 51 |
| 105 | Stone agg. (40mm) for avg lead of 40 km Qty Vide item No. 4 |
| 106 | ESTIMATE FOR THE CONSTRUCTION OF SEPTIC TANK AND SOAKAGE PIT (2-No) Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters OrdinaRY ROck : |
| 107 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, etc including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and its disposal Ordinary Rock |
| 108 | Providing & Laying of stone soling (dully hand packed)including watering dressing and ramming with all carriages loading un-loading and stacking etc complete |
| 109 | Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:4:8 coarse sand 40mm nominal size crushed stone agg.) |
| 110 | Providing and laying in position specified grade of reinforced cement cencrete excld. The cost of centring, shuttering, finishing and reinforecement-All work upto plinth level. 1:1.5:3 graded stone agg. 20mm nominal size |
| 111 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 112 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms. |
| 113 | Dry Random rubble masonry with hard stone in foundation & plinth using nalah stone with bond stones including all carriages upto the site complete |
| 114 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in 1:6 coarse sand(1 cement, 6 coarse sand) |
| 115 | 12 mm Cement Plaster of mix 1:6(1 cement:6 fine sand) |
| 116 | Cement Concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone agg) finished with a floating coat of neat cement incld. cement slurry but excld the cost of nosing of steps etc complete 50mm thick with 20mm n/s stone agg crushed |
| 117 | Carriage of materails By Mech.Transport,from source to site of work Stone agg. (20mm) for avg lead of 40 km Qty Vide item No. 5 |
| 118 | Sand for avg lead of 55 km Qty Vide item No. 4, 5, 9 |
| 119 | Bricks for avg lead of 32 km Qty Vide item No. 9 |
| 120 | Stone agg. (40mm) for avg lead of 40 km Qty Vide item No. 4 |
| 121 | Cost for CONSTRUCTION OF SEPTIC TANK AND SOAKAGE PIT (1-No) |
| 122 | CONSTRUCTION OF GENDER BASED TOILET BLOCK; Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, etc including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and its disposal Ordinary Rock |
| 123 | Providing & Laying of stone soling (dully hand packed)including watering dressing and ramming with all carriages loading un-loading and stacking etc complete |
| 124 | Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:4:8 coarse sand 40mm nominal size crushed stone agg.) |
| 125 | Providing and laying in position specified grade of reinforced cement cencrete excld. The cost of centring, shuttering, finishing and reinforecement-All work upto plinth level. 1:1.5:3 graded stone agg. 20mm nominal size |
| 126 | Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:2:4 coarse sand crushed stone agg. 20mm) |
| 127 | Reinforced cement conc. Work in beams, suspended floors roofs having slope upto 15 deg. Landing balconies, shelves, lintels upto floor 5 level excld. Centring, shuttering in 1:1.5:3 20mm stone agg. Nominal size |
| 128 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 129 | Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns |
| 130 | Centering and shuttering including strutting, propping etc. and removal of form for Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 131 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms. |
| 132 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 133 | Supply and Filling in Rooms Using GSB / Nallah Muck including Levelling Watering ,Ramming and Consolidation including Carriage Complete |
| 134 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in 1:6 coarse sand(1 cement, 6 coarse sand) |
| 135 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 136 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z. sections and other sections of approved make confirming to IS:733 and IS:1285 fixed with dash fastener of required dia and size including necessary filling up of gaps of junctions i.e at top bottom and sides with required EPDM rubber / neoprene-gasket felt etc. Aluminium sections shall be mechanically wherever required including cleat angle, aluminium sanp beeding for glazing/ panelling, cp brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge incl. glazing panelling and dash fasteners including all required Standard hardware etc Complete For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) |
| 137 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) |
| 138 | Providing and fixing fly proof wire gauze to windows, clerestory windows and doors and nuts and bolts complete. Stainless steel (grade 304) wire gauze of 0.5mm dia wire and 1.4 mm aperture on both sides. |
| 139 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in charge. Pre-laminated particle board with decorative lamination on both sides. |
| 140 | Providing hardware items for Doors and Windows of standard make as per directions of EIC. Aluminum Tower Bolt (6\\" Inch) |
| 141 | Aluminum Tower Bolt (4\\" Inch) |
| 142 | Aluminum Handles (4\\" Inch) |
| 143 | Aluminum Handles (6\\" Inch) |
| 144 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 145 | Providing and fixing precoated High Ribbed galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Including Ridges, Hips, Valleys of high strength SMP sheets complete |
| 146 | 12mm Cement Plaster of mix 1:6(1 cement:6 fine sand) |
| 147 | 6 mm cement plaster to ceiling of mix 1:3(1 cement: 3 fine sand) |
| 148 | 15mm Cement Plaster on the rough side of single or half brick wall of mix 1:6(1 cement:6 fine sand) |
| 149 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 150 | Providing and laying Ceramic glazed floor tiles 300x300 mm of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 including pointing the joints with white cement matching complete. All Colors |
| 151 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 152 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 153 | Cement Concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone agg) finished with a floating coat of neat cement incld. cement slurry but excld the cost of nosing of steps etc complete 50mm thick with 20mm n/s stone agg crushed |
| 154 | Providing and fixing stainless steel 18 Guage (Grade 304) railing made of Hollow tubes channels, plates etc. Like Jindal Including master pillar and boster on alternate steps or equivalant including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete , including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. |
| 155 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 156 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 157 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. including ball cock valve |
| 158 | Providing and fixing C.P brass bib cock of approved quality Makes:- (15 mm nominal bore) |
| 159 | Providing and fixing C.P. brass angle valve of approved quality conforming to IS:8931 (15 mm nominal bore) 600x450mm with single 15mm C.P brass piller taps |
| 160 | Providing and fixing soil, waste and vent pipes IS 13592 & fittings (IS: 14735 ) suitable to rubber ring joints , which includes bends, rubber ring, jointing, junctions, clean out plug , cowls, offsets, collar, M.S holder-bat clamps, access pieces, trap of self cleansing design .etc. complete including jointing. 100 mm dia PVC |
| 161 | 75 mm dia. PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type B |
| 162 | Construction of 9\\" thick brick masonary manholes in cement mortar (1:4) mix, foundation cement concrete ( 1:4:8) ,12 mm thick inside cement plaster with finishing, making channels in cement concrete ( 1:2:4) incl. cost of manhole covers PVC ISI mark with frame size ( 1'-6\\" x1'-6\\" x 1'-6\\") inside size |
| 163 | Providing and Fixing of Floor Traps 110 mm with double chrome plated Cover one Grated and one closed and all other fittings required complete |
| 164 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in- charge. Internal work-exposed on wall with clamps at 1.00 meter spacing PN-16 pipe, 16mm OD(SDR-7.4) 32mm dia. Nominal bore |
| 165 | Providing and fixing of various PVC sanitary fittings Door Tee 4'' |
| 166 | Reducer T (4''/3'') |
| 167 | Union (3\\"/4\\") |
| 168 | Cowl and Cap |
| 169 | Bend 90 Degree |
| 170 | Tanky Nipple |
| 171 | Flexible Connection 18inch |
| 172 | P Trap |
| 173 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 174 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm sizes respectively.incl. all fittings |
| 175 | Providing and Fixing of 1.0 HP unidirectional flow Motor of approved brand make and as per relevant IS Specifications including all fittings complete as per directions of Engineer in Charge. |
| 176 | Carriage of materiials by mech transport from source to site of work stone agg (20mm) for an avg lead of 40 km, Qty vide item No. 04, No. 5 and 06 |
| 177 | Sand for an avg lead of 55 km, Qty vide item No. 03, 04, No. 5 and 06 |
| 178 | Bricks for an avg lead of 32 km, Qty vide item No. 013 |
| 179 | Stone agg (40mm) for an avg lead of 40 km, Qty vide item No. 03 |
| 180 | CONSTRUCTION OF WATER STORAGE TANK Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, etc including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and its disposal ordinary Rock |
| 181 | Providing & Laying of stone soling (dully hand packed)including watering dressing and ramming with all carriages loading un-loading and stacking etc complete |
| 182 | Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:4:8 coarse sand 40mm nominal size crushed stone agg.) |
| 183 | Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:2:4 coarse sand crushed stone agg. 20mm) |
| 184 | Providing and laying in position specified grade of reinforced cement cencrete excld. The cost of centring, shuttering, finishing and reinforecement-All work upto plinth level. 1:1.5:3 graded stone agg. 20mm nominal size |
| 185 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 186 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms. |
| 187 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in 1:6 coarse sand(1 cement, 6 coarse sand) |
| 188 | Cement Concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone agg) finished with a floating coat of neat cement incld. cement slurry but excld the cost of nosing of steps etc complete 50mm thick with 20mm n/s stone agg crushed |
| 189 | 15mm Cement Plaster on the rough side of single or half brick wall of mix 1:4(1 cement:4 fine sand) |
| 190 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in- charge. Internal work-exposed on wall with clamps at 1.00 meter spacing PN-16 pipe, 25mm OD(SDR-7.4) 32mm dia. Nominal bore |
| 191 | Providing and Fixing of 3.0 HP (Solar Based unidirectional flow Motor of approved brand make and as per relevant IS Specifications including all fittings necessary solar fittings and installations required at site complete as per |
| 192 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 193 | Carriage of materiials by mech transport from source to site of work stone agg (20mm) for an avg lead of 40 km, Qty vide item No. 04, 05 and 09 |
| 194 | Sand for an avg lead of 55 km, Qty vide item No. 03, 04 & 05 |
| 195 | Bricks for an avg lead of 32 km, Qty vide item No. 08 |
| 196 | Stone agg (40mm) for an avg lead of 40 km, Qty vide item No. 03 |
| 197 | Construction of Fencing Around Double storey Hut Demolishing R.B work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. |
| 198 | Providing & Laying of stone soling (dully hand packed)including watering dressing and ramming with all carriages loading un-loading and stacking etc complete |
| 199 | Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:4:8 coarse sand 40mm nominal size crushed stone agg.) |
| 200 | Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:2:4 coarse sand crushed stone agg. 20mm) |
| 201 | Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns |
| 202 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed Fine chisel dressed |
| 203 | Extra for fine chisel dressed Devri Stone in square or rectangular Pillars |
| 204 | 15mm Cement Plaster on the rough side of single or half brick wall of mix 1:6(1 cement:6 fine sand) |
| 205 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and two or more coats of steel Paint all complete. |
| 206 | Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in Charge. (18 mm thick) |
| 207 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of G.S. Sheet |
| 208 | Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead Of sectional area 40 sqcm. and above |
| 209 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead Of area of 3 sqm. and below |
| 210 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In Cement mortar |
| 211 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge 1:3:6 or richer mix (i/c equivalent design mix) |
| 212 | Carriage of materiials by mech transport from source to site of work stone agg (20mm) for an avg lead of 40 km, Qty vide item No. 04 |
| 213 | Sand for an avg lead of 55 km, Qty vide item No. 03, 04 |
| 214 | Stone agg (40mm) for an avg lead of 40 km, Qty vide item No. 03 |
| 215 | CONSTRUCTION OF ENTRY GATE FOR HUT Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, etc including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and its disposal ordinary Rock |
| 216 | P/L, of dry stone soling duly hand packed with ramming, dressing, watering and compacting all inclusive leads, lifts, loading, un-loading, cost and carriage of material involved |
| 217 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4coarse sand : 8 graded Crushed stone aggregate 40 mm nominal size |
| 218 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 219 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 220 | Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excludingthe cost of centering, shuttering finishing and reinforcement with:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 221 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 222 | Centring shuttering incld strutting and propping incld removal of formwork for a.) Foundations,bases of columns |
| 223 | b.) Walls (any thickness) including attached pilasters, buttresses, |
| 224 | Centring shuttering including strutting and propping incld removal of formwork for: Arches, domes, vaults upto 6 m span |
| 225 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing.One face dressed Fine chisel dressed (arch design/type as per the directions of engineer in charge) |
| 226 | Extra for fine chisel dressed Devri Stone in square or rectangular Pillars |
| 227 | Stone work in plain Ashlar in plain cornice 150mm in cement mortar 1:6 i/c pointing with cement mortar 1:2 with admixture of pigment matching the stone shade (Devri stone fine chiseled) i/c all leads. |
| 228 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven storey height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffoldings for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. |
| 229 | Carriage of materiials by mech transport from source to site of work sand aboe (40mm) for an avg lead of 40 km, Qty vide item No. 04 03, 05 and 06 |
| 230 | Sand for an avg lead of 55 km, Qty vide item No. 03, 04, 05 and 06 |
| 231 | AS PER ESTIMATE |
| 232 | CONSTRUCTION OF ENTRANCE GATE Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, etc including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and its disposal All kinds of soil. |
| 233 | Providing & Laying of stone soling (dully hand packed)including watering dressing and ramming with all carriages loading un-loading and stacking etc complete |
| 234 | Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:4:8 coarse sand 40mm nominal size crushed stone agg.) |
| 235 | Providing and laying in position specified grade of reinforced cement cencrete excld. The cost of centring, shuttering, finishing and reinforecement-All work upto plinth level. 1:1.5:3 graded stone agg. 20mm nominal size |
| 236 | RCC work in walls, incld. attchd pilasters, buttresses plinth & string courses, columns, pilars, abts, posts and struts etc upto floor 5 level excld. Cost of cntring, shuttering, finishing and reinforcement 1:1.5:3 graded crshd stne agg. 20mm nominal size |
| 237 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 238 | Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns |
| 239 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, pillars, piers, abutments, posts and struts. |
| 240 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed Fine chisel dressed |
| 241 | Extra for fine chisel dressed Devri Stone in square or rectangular Pillars |
| 242 | Providing and laying chisel dressed Devri Stone of size 150 mm in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing for cornice |
| 243 | Supply and Filling in Rooms Using GSB / Nallah Muck including Levelling Watering ,Ramming and Consolidation including Carriage Complete |
| 244 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and two or more coat of paint of desired color all complete. |
| 245 | Providing and fixing of Cast Iron Ornamental pieces in Entry and Wicket Gate of Shapes, size and design as desired and approved by EIC including Cost of priming and painting all complete |
| 246 | Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-4956 01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge ( included the Structural frame work including M.S. plate to be provided). Overhead informatory road signage. |
| 247 | Carriage of materiials by mech transport from source to site of work stone agg (20mm) for an avg lead of 40 km, Qty vide item No. 04, 05 |
| 248 | Sand for an avg lead of 55 km, Qty vide item No. 03, 04 |
| 249 | Stone agg (40mm) for an avg lead of 40 km, Qty vide item No. 03 |
| 250 | Electrical Work at Hirpora Wildlife Sanctuary Shopian: Wiring for light point/fan point/exhaust fan point/call bell point with 2 x 1.5 sq.mm FRLS PVC insulated copper conductor of Havells/Polycab/Finolex/Anchor etc. as directed by engineer incharge, single core cable in surface/recessed medium class PVC conduit, with modular switch (Anchor Roma Plus/Legrand Myline/SSK Schneider Livia/ABB Tisha make), modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core etc. as required. |
| 251 | Wiring for light/power plug with 2x4 sq.mm + 1x4 sq.mm earth wire, FRLS PVC insulated copper conductor (Havells/Polycab/Finolex/Anchor) as directed by engineer incharge, single core cable in surface/recessed medium class PVC conduit. |
| 252 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, modular plate, suitable GI box, connections etc. as required. Modular Switch & Socket: (Anchor Roma Plus/Legrand Myline/SSK Schneider Livia/ABB Tisha make). |
| 253 | Wiring for lighting circuits / 6–10 amp power plug with 2x2.5 sq.mm FRLS PVC insulated copper conductor (Havells/Polycab/Finolex/Anchor) as directed by engineer incharge, single core cable in surface/recessed medium class PVC conduit along with 1 no. 2.5 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 254 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non-residential buildings). Modular Switch & Socket: (Anchor Roma Plus/Legrand Myline/SSK Schneider Livia/ABB Tisha make). |
| 255 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 256 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, “C” curve, including connections, painting etc. as required. |
| 257 | 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire |
| 258 | 2 x 6 sq.mm + 1 x 6 sq.mm earth wire (submain for emergency circuit) |
| 259 | 2 x 10 sq.mm + 1 x 6 sq.mm earth wire (Lighting submain) |
| 260 | 2 x 16 sq.mm + 1 x 6 sq.mm earth wire (Heating Submain) |
| 261 | Supplying and fixing of following sizes of medium class PVC conduit (Anchor/Ravindra/E.F. make) along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required, with cement plaster, wall putty, paint complete. 25mm |
| 262 | Providing and fixing of 6–16 mm Cu thimbles duly crimped at cable ends. |
| 263 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 264 | Supply, installation testing and commissioning of Indicator of Anchor Roma Plus/Legrand Myline/SSK NV/Schneider Livia/Crabtree Athena make. |
| 265 | Sub Head-2 Fixtures and Fittings: Supply, installation testing and commissioning of 18 W LED surface/recess/square or round mounted light luminary fitting with minimum system lumen efficacy of 100 lm/W with pressure die cast aluminium housing and heat sink, PF > 0.95, THD < 10%, CCT 5700K, CRI 80. LED life 50000 hrs at L70, separate driver, heat sink, earthing provision. Input voltage 150V–270V. Fixture should have in-built surge protection of 2kV. Certification LM79 & LM80 from approved NABL lab/Govt. of India. Includes AMC for 2 years. Make: Philips/Halonix/Wipro (sample approval before installation). |
| 266 | S/F testing and commissioning of 20 Watt 4 ft wall mounted LED batten with powder coated aluminium housing & integrated electronic driver, THD < 10% (commercial series) Philips/Halonix/Wipro make or equivalent. |
| 267 | Supply, installation, testing and commissioning of 1200 mm sweep ceiling fan with 3 no. aluminium blades, 30 cm down rod, canopy, shackle kit, power factor ≥ 0.9, service value ≥ 2.6, safety pin, nut bolts, washers, temp rise ≤ 75°C, insulation resistance > 2 mega ohm, suitable for 230V, 50 Hz, including iron hook complete. USHA/Orient/Crompton make (sample approval before installation). |
| 268 | Supply and fixing of 6 amp/250V AC fan dimmer step type 2 module with cover plate Anchor Roma Plus/Legrand Myline/ABB Lyvia/Schneider Livia/Havells Coral make. |
| 269 | Supply, installation, testing and commissioning of 200mm–250mm sweep exhaust fan (shutter type) of Havells/USHA/Crompton/equivalent make as directed by engineer incharge, including making of space in wall/window and necessary connections. |
| 270 | Supplying and fixing triple pole and neutral sheet steel MCB distribution board (Legrand/Schneider/Hager make) 240V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, DIN bar, interconnections, powder painted including earthing etc. (excluding MCB/RCCB/Isolator). 6 way (4+2), Double door |
| 271 | S/F testing and commissioning of MCBs 10kA (Legrand/Schneider/ABB equivalent): (a) 6–32 Amp SP MCB |
| 272 | (b) 40–63 Amp DP MCB |
| 273 | Providing of Chemical earthing as per IS standards by way of digging 10’ deep pit then embedding 3 meter Copper bound G.I Earthing electrode, 80mm dia. connecting the plate with main control board by 8–10 SWG Copper wire with 1/2” dia. Full thread brass nut and bolt and washers with cover plate etc. Refilling of pit with chemical compounds. |
| 274 | S/L, testing and commissioning of PVC XLPE insulated aluminium armoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments. Havell/Eq. standard make as directed by engineer incharge and making end termination with brass compression gland and aluminium lugs of required size. 25 sq.mm 2 core |
| 275 | Supply installation testing and comm. of flood light 50 W (warm white), Epoxy powder coated die-cast aluminium housing (LM24) with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant. PG gland is used for cable entry and provision for loop-in/loop-out class 1, IP66, IK 07, with high power LED’s as light source with Built-in Potted IP67 electronic LED driver with APFC, toughened glass and secondary lens, Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection upto 10kV with Built in SPD & other safety test as per IS 15885 Part-2/Sec 13, IEC60598-1. Preferred make: Philips/Havell/Wipro/Crompton make. the job also includes the angle iron stand of suitable size to be grouted in cement concrete with hold fasteners complete job. |
| 276 | Supplying, Installation, Testing and Commissioning of CO2 Type Fire Extinguisher 4.5 Kg Capacity ISI Mark (IS:15683)suitable for ‘B’ and ‘C’ class fires – inflammable liquids, gaseous fires like LPG, and acetylene, and electrical. |
| 277 | Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel, duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet steel, floor/wall mounted, vermin and dust proof, indoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears, Aluminium Bus Bar of various ratings after taking Derating factor into account, and other allied accessories etc. as required. (As per approved design, size may vary as per site requirement) |
| 278 | Providing and fixing of following protection equipments and other allied accessories including inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required. Normal INCOMING: a) 125A 2P MCCB 25 KA including spreader links including spreader links, Icu=100% (Adjustable thermal and Adjustable magnetic release) Legrand/ Shnider/Siemens/ABB make. |
| 279 | 2 No. of Aluminium Bus Bar of 200 Amp. |
| 280 | c) Digital meters and phase indicators – 1 set. |
| 281 | d) Onload Change over switch 63 Amp for generator. Front operated. |
| 282 | e) 2 No. of Aluminium Bus Bar of 100 Amp. |
| 283 | c) Digital meters and phase indicators – 1 set. |
| 284 | Inverter Incoming (a) 100 amp DP MCB 10K legrand/Shnider/Siemens/ABB make. |
| 285 | (b) 100 Amp 2 strip bus bar |
| 286 | (c) digital meters and phase indicators – 1 set. |
| 287 | Outgoing c) 40–63amp DP MCB |
| 288 | c) space for 12 way MCB’s |
| 289 | Supply installation testing and commissioning of 5KVA off grid (Hybrid) solar inverter system (luminous, exide, Havell make) with following specifications (complete Job)test certificate to be provided by the manufacturer. (a) Solar Power plant: 5.50KWp(b) Solar panel in Watt: 550Wp each, (Mono PERC Half Cut Panel)(c) Solar Panel Quantity: 10 Nos.(d) Solar Structure: 5.5KWp(e) Off Grid Solar Inverter (hybrid): 5KVA(f) Solar Battery tubular (200 AH): 4 No’s(g) Junction Box: 1 No(h) DC Cable: 50 Mtr.(i) AC Cable: 50 Mtr. Solar Accessories: Fasteners, Cable tie, crimping tool, Earthing Kit, Lightning Arrestor, Galvanised iron module mounting structure as per OEM standards, and BOS. |
| 290 | Supply and fabrication of angle iron stand of Structural steel work in built up sections, and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, suitable to house 4 No. Tubular batteries and solar inverter. |
| 291 | S/I testing and comm. of single phase copper wound 10 KVA 50Hz oil cooled servo controlled voltage stabilizer (Electrified/Alba/Cosco/Chinar make/equivalent make as directed by engineer incharge) (Transformer oil is to be provided with stabilizer conforming to IS 335,IEC290) having an input voltage ranging from 90V to 270 V (phase voltage) and balanced output voltage of 220V, +/- 1%. (Test certificate to be provided by the manufacturer) The unit incorporate a) 0–500V Digital voltmeter with selector switch, indicating lights, adjustment of auto/manual selector switch. b) Single phase Preventer, time delay of 10 Secs, low cut and high cut. h) 20% over load bearing capacity for one hour. / Bypass Facility etc |
| 292 | Supply installation testing and commissioning of portable Generator set having self start facility, petrol run/starting having max. output of 3000VA and rated output of 2800VA at 230V/50 HZ, starting system of recoil type, with unique features of Eco throttle, ultra silent. Preferred make Honda (EU30is)/ equivalent standard make as desired by engineer incharge. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
