Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Civil Work |
| 2 | Earth work in bulk excavation in all kinds of soil by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. |
| 3 | Supply and filling of dry stone soling in foundation trenches tightly handpacked with hand ramming, watering and compacting to required density including cost and carriage of all materials to site of work, with all leads, lifts, loading, unloading, stacking, haulage, and octori taxes. |
| 4 | Providing and laying in position cement concrete 1:4:8 grade (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) including curing but excluding the cost of centring and shuttering all work upto plinth level including cost and carriage of all materials to site of work, with all leads, lifts, loading, unloading, stacking, haulage, and octori taxes. |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m including cost and carriage of all materials to site of work, with all leads, lifts, loading, unloading, stacking, haulage, and octori taxes. |
| 6 | Supplying and filling plinth with fine GSB under floors including watering, ramming consolidating and dressing complete to achieve MDD etc. complete job. including cost and carriage of all materials to site of work, with all leads, lifts, loading, unloading, stacking, haulage, and octori taxes. |
| 7 | Providing and laying in position cement concrete of specified grade including curing excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) including all leads, lifts, costs and carriages upto site of work complete job including cost and carriage of all materials to site of work, with all leads, lifts, loading, unloading, stacking, haulage, and octori taxes. |
| 8 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge All works upto plinth level including cost and carriage of all materials to site of work, with all leads, lifts, loading, unloading, stacking, haulage, and octori taxes. |
| 9 | Providing and laying in position cement concrete of specified grade including curing excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including all leads, lifts, costs and carriages upto site of work complete job including cost and carriage of all materials to site of work, with all leads, lifts, loading, unloading, stacking, haulage, and octori taxes. |
| 10 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge All works above plinth level upto floor V level including cost and carriage of all materials to site of work, with all leads, lifts, loading, unloading, stacking, haulage, and octori taxes. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases of columns etc. for mass concrete. |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form work for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access platforms. |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form work for Columns, pillars, piers, abutments, posts and struts. |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form work for Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form work for Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form work for Stairs (excluding landings) except spiral staircases. |
| 18 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto all levels incl all costs and carriages Complete Job Thermo-Mechanically Treated bars of grade Fe-500D or more including cost and carriage of all materials to site of work, with all leads, lifts, loading, unloading, stacking, haulage, and octori taxes. |
| 19 | Providing and fixing factory made uPVC white colour casement/ casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge incl cost of glass panes and silicon sealant. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 20 | Providing and fixing 1st Class Deodar wood work in frames of doors, window, clerestory windows and other frames, wrought framed and fixed in position with holdfast lugs or dash fasteners of required dia and length incl cost of hold fast/dash fastener including cost and carriage of all materials to site of work, with all leads, lifts, loading, unloading, stacking, haulage, and octori taxes. |
| 21 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws all complete as per direction of Engineer-in-charge of 2nd class Kail Wood 35 mm thick incl all leads, lifts, loading unloading, cost and carriages with head load of materials involved upto site of work complete job |
| 22 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. second class kail wood |
| 23 | Providing and fixing 4 mm thick float Glass panes (weighing not less than 10kg/sqm) as per specifications with beading up to size 40x20mm in wooden frames incl all leads, lifts, loading unloading, cost and carriages with head load of materials involved upto site of work complete job |
| 24 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). including cost and carriage of all materials to site of work, with all leads, lifts, loading, unloading, stacking, haulage, and octori taxes. |
| 25 | P/F Aliminium anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. of reputed make and model as directed and approved by Engineer in charge incl cost of necessary screws nails etc complete in all respects |
| 26 | Handle 200 mm |
| 27 | Handles 100 mm |
| 28 | Tower Bolts 200x10 mm |
| 29 | Tower Bolts 100x10 mm |
| 30 | Finishing with Deluxe multi surface paint system for interiors andexteriors using primer as per manufacturers’ specifications: Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture including cost and carriage of all materials to site of work, with all leads, lifts, loading, unloading, stacking, haulage, and octori taxes. |
| 31 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in 1:6 cement mortar including cost and carriage of all materials to site of work, with all leads, lifts, loading, unloading, stacking, haulage, and octori taxes. |
| 32 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in superstructure above plinth level including curing in 1:6 cement mortar including cost and carriage of all materials to site of work, with all leads, lifts, loading, unloading, stacking, haulage, and octori taxes. |
| 33 | 15 mm thick cement plaster of 1:6 mix ( 1 cement: 6 coarse sand) on walls etc including all leads, lifts, costs and carriages upto site of work complete job |
| 34 | 12 mm thick cement plaster of 1:6 mix ( 1 cement: 6 coarse sand) on walls etc including all leads, lifts, costs and carriages upto site of work complete job |
| 35 | Providing and applying 2mm thick white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including cost and carriage of all materials to site of work, with all leads, lifts, loading, unloading, stacking, haulage, and octori taxes. |
| 36 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour Two or more coats including cost and carriage of all materials to site of work, with all leads, lifts, loading, unloading, stacking, haulage, and octori taxes. |
| 37 | Finishing walls with acrylic smooth exterior paint of required shade onNew work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)including cost and carriage of all materials to site of work, with all leads, lifts, loading, unloading, stacking, haulage, and octori taxes. |
| 38 | Flooring with marble stone of specified thickness as per sample ofmarble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with 18mm thick Agaria White including all leads, lifts, costs and carriages upto site of work complete job . |
| 39 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete (600x600mm) including all leads, lifts, costs and carriages upto site of work complete job |
| 40 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. including all leads, lifts, costs and carriages upto site of work complete job : |
| 41 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete In all colours, shades, except White, Ivory, Fume Red Brown including all leads, lifts, costs and carriages upto site of work complete job. |
| 42 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed andconsolidated and grouted with fine sand including finishing the top smooth and curing completeincluding all leads, lifts, costs and carriages upto site of work complete job |
| 43 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishingand making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, including all leads, lifts, costs and carriages upto site of work complete job. |
| 44 | Structural steel work welded in built up section for trusses and framed work including cutting hoisting, and applying a primer coat of approved steel primer including all leads, lifts, costs and carriages upto site of work complete job . |
| 45 | Providing and fixing of color coated Hi Rib roofing of thickness approved by EIC 0.05 mm incld cost of hooks etc incld carriage of materials to site, and including cutting to size and shape wherever required. incl all leads, lifts, loading unloading, cost and carriages with head load of materials involved upto site of work complete job |
| 46 | Providing ridges or hips of width 60cm overall width plain GS sheets 0.50 mm thick fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. including all leads, lifts, costs and carriages upto site of work complete job |
| 47 | Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C. pan) with seat and lid with C.P. brass hinges and rubber buffers, 10 liter low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm overflow pipe with specials of standard make and mosquito proofcoupling of approved municipal design complete, including painting offittings and brackets, cutting and making good the walls and floors wherever required. White vitreous china dual purpose WC pan with white solid plastic seat lid with white vitreous china flushing cistern and C.P. flush bend of approved brand like Hindware, Cera, Jaquar or equavalent including all leads, lifts, costs and carriages upto site of work complete job |
| 48 | Providing and fixing wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern incl suitable Pedestal, PVC connections to basin mixer, painting of fittings and brackets, cutting and making good the walls wherever required of approved brand like Hindware, Cera, Jaquar or equavalent including all leads, lifts, costs and carriages upto site of work complete job |
| 49 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete including all leads, lifts, costs and carriages upto site of work complete job 40mm dia Flexible pipe |
| 50 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
| 51 | Providing and fixing soil, waste and vent pipes IS 13592 & fittings (IS: 14735 ) suitable to rubber ring joints , which includes plain bends, door bends, sockets, rubber ring, jointing, junctions, clean out plug , cowls, reducers, offsets, collar, M.S holder-bat clamps, access pieces, floor traps i/c steel grating, trap of self cleansing design .etc. complete including jointing incld all fittings and fixtures, tees, bends, door tees, clamps, cowel caps,etc as directed. |
| 52 | 75 mm dia. PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type-B(Astral/Supreme/Ajay/Prince Pipes) |
| 53 | 100 mm dia. PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type-B(Astral/Supreme/Ajay/Prince Pipes) |
| 54 | Grating CP Brass |
| 55 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as perI.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040mm bowl depth 200mm including all leads, lifts, costs and carriages upto site of work complete job |
| 56 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. Prince, Supreme, Vectus or equivalent ( heavy duty) make. PN -16 pipes, 25 mm OD |
| 57 | External work concealed including trenching, refilling etc., PN-16 pipe , 32mm OD |
| 58 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore |
| 59 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 60 | Providing and fixing 15 mm nominal bore C.P. brass bib cock ofapproved quality conforming to IS : 8931 like Jaquar, cerra, Jhonson or equivalent incl all costs and carriages |
| 61 | Providing and fixing 15 mm nominal bore C.P. angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 incl all costs and carriages complete |
| 62 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality like Jaquar, cerra, Jhonson or equivalent make, weighing not less than 1.970 kg. |
| 63 | Providing and fixing CP Brass Single lever telephonic wall mixer ofquality & make as approved by Engineer in charg like Jaquar, cerra, Jhonson or equivalent make e 15 mm nominal dia |
| 64 | Providing , installation, commissioming and testing Hot water Geyzer of approved make including fixing with bolts/ fastners like Venus, jupiton, Racold or equivalent make including all necessary fittings including all leads, lifts, costs and carriages upto site of work complete job 50 litre capacity |
| 65 | 25 litre capacity |
| 66 | Dry random rubble masonry with hard stone from Quarry in foundation and plinth with Bond stone including all leads, lifts, costs and carriages upto site of work complete job |
| 67 | Constructing brick masonry chamber/manhole with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame & hinges (light duty) 455x610 mm internal dimensions i/c padlock arrangement, fixed in 1:1.5:3 mix,, inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design |
| 68 | Providing fixing of iron manhole cover with hinge and lock arrangement, over septic /soakage pit of approved design complete job |
| 69 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets ofthe same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 70 | Providing and fixing uplasticized PVC connection pipe with brass unions 24\\" 20mm NB |
| 71 | Providing and Fixing of 1st quality wooden panelling 12mm thick over ply board of 12 mm thickness incl polishing with 2 or more coats of leacor/sealer and admixtures to give required shae and shine incl cost of wooden base work, all fittings and fixtures like cornices etc complete incl all cost anf carriages complete |
| 72 | Electrical Work |
| 73 | Internal Electrification |
| 74 | Wiring for Light point/Fan point/Exhaust fan/Bell point with (P+N+E) 3x1.5 sq.mm FRLS-H PVC insulated Multi strand Copper conductor single core cable, (Havells/Anchor/Eq Make) in surface/recessed Conduits laid in slabs (Including Cost of Conduit 25mm) with 01 No.of 6 Amp Modular Switch,Modular Plate,Cover in front & suitable GI box etc ISO/IEC Certified/Schneider/ Havells/ Legrand/Anchor roma plus/ABB/Eq.Make & along with 2.5 Sqmm (P+N+E) Circuit Wire of same make as mentinoned above & items shall be approved before execution of work by SDO. |
| 75 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required,ISO/IEC Certified of Havells/ Legrand/Anchor/Schneider /ABB/Eq Make & shall be approved before execution of work by SDO. |
| 76 | Wiring for Power Plug with (P+N+E) 3 x 4 sq.mm FRLS-H PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit (Havells/Anchor/Eq Make) |
| 77 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required, ISO/IEC Certified /Legran/Anchor roma plus/Schneider/ABB/Eq Make & shall be approved before execution of work by SDO. |
| 78 | Wiring for 6Amp Plug(Computer Point) with (P+N+E) 3 x 2.5 sq.mm FRLS-H PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit (Havells/Anchor/Eq. Make) |
| 79 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including proving and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings), ISO/IEC Certified Havells/Legrand/ Anchor roma plus/Schneider/ABB/Eq.Make & shall be approved before execution of work. |
| 80 | Wiring for Sub main Wiring along with earth Wire with the following Sizes of FRLS-H PVC insulated copper conductor, single core Cable in surface/Recessed medium class PVC conduit (Havells/Anchor/ Eq.Make) & shall be approved before execution of work (Including Cost of Conduit/Channel) |
| 81 | 2 X 16 sq. mm + 1 X 6 sq. mm earth wire |
| 82 | 2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 83 | Supply/Fixing/Testing and Commissioning of 6Amp to 32Amp Rating SP,240v,*C* Curve 10K, Miniature Circuit Breaker suitable for inductive load of following poles in existing MCB . DB Complete with connections.(L&T/Siemens/Legrand/Havells/ABB/Eq. Make) |
| 84 | Supply/Fixing/Testing and Commissioning of following rating, Double pole, (P+N) 240 V, C* Curve 10K,Miniature Circuit Breaker (MCB) in the existing MCB DB complete with connections. (L&T/Siemens /Legrand/Havells/ABB/Eq Make) |
| 85 | 63 Amp. |
| 86 | 40 Amp. |
| 87 | Supplying and Fixing of MCB way 4 way (4 + 12), horizontal typed , sheet steel, Double Door Distribution Board, TPN 240V/415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc, as required. (L&T/Siemens/Legrand/ Schneider/ABB/Eq Make) |
| 88 | Supply/Installation/Testing and Commissioning of 18W + LED Conceal/Surface (Commerical Type) light luminary fitting round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV.Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/government of India authorised lab.The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years,which includes replacement of fixtures of Philips/Havell's/Wipro/Halonix/Eq Make. |
| 89 | Supply/Installation/Testing & Commissioning of 10W LED Mirror Light of Havells/Wipro/Jaguar/ Eq.Make as duly fitted on walls including making of necessary Connections & sample shall be approved by EIC. |
| 90 | Providing & Fixing of IK08 IP-66 protected high power LED 100 Watt flood light system with single piece Pressure diecast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of high power LED of 3 to 5 watt each. Integrated potted driver as a unique BIS R number having efficiency more than 85% and in compliance to BIS certified and Trade mark certificate. The System level Luminaire efficacy >=125 Im/wt. LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety .Power Factor >0.95 , THD(I) <10% , driver current <=750mA. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector, Surge Protection Min >=4KV internal and 10KV external but inside driver compartment, System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI>70 and CCT 5700K 355K. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/authenticity. Fixture shall be IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR:-High Power LED Flood Light Minimum lumen output 6200 Im of Havells/Crompton/Philips Make as approved and to be installed on outside block including S/F of suitable size of Gyser bolt.The job further includes replacement warranty of fixture (if damaged/burnt out what so ever reason) for a period of two years reckoned from date of successful commissioning /handing over of site to intending department. |
| 91 | Supply, Installation, Testing and Commissioning of decorative 1200 mm sweep, ceiling fan with 3 No. Aluminium blades, 30 cm long down rod, 2nos. canopies, shackle kit, Power Factor not less than 0.9, Service Value including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, and including iron hook complete . USHA Striker/Havells Oyster matalic/CromptonAura/equivalent make as directed by engineer incharge. |
| 92 | Supply/Installation/Testing and Commissioning of 225-250mm Shutter Typed,320 Cu.m/Hr.AC 220-240 Volts, 50 Hz Exhaust fan made out of ABS Plastic Material with inbuilt thermo cut-off Protection and Noise Level not exceeding 37dB of Following Sizes including connection etc USHA/Havells/Crompton/Eq. Make.(Min 1-Star) |
| 93 | Supply/Laying/Connecting and Commissioning of 120 sq.mm 3.5-Core XLPE/PVC insulated and steel armored 1.1 KV grade Aluminum Cable of Havells/Polycab/Eq. Make with required size of thimbles dully crimped with hydraulic crimping tool including Providing/Fixing of saddles/clips with making of connection and partially to be laid underground through DWC High Density Poly ethylene Pipe having Corrugation on Outer wall and Plain surface inner wall Conforming to IS: 14930 Part-1 and 2 Complete with accessories for Protection of 1.1 KV Grade under Ground cable Directly in Ground at a Depth of 50 CM including excavation and Refilling the Trench .(Material to be approved before execution) |
| 94 | Supply/Laying/Connecting and Commissioning of 50 sq.mm 3.5-Core XLPE/PVC insulated and steel armored 1.1 KV grade Aluminum Cable of Havells/Polycab/Eq. Make with required size of thimbles dully crimped with hydraulic crimping tool including Providing/Fixing of saddles/clips with making of connection and partially to be laid underground through DWC High Density Poly ethylene Pipe having Corrugation on Outer wall and Plain surface inner wall Conforming to IS: 14930 Part-1 and 2 Complete with accessories for Protection of 1.1 KV Grade under Ground cable Directly in Ground at a Depth of 50 CM including excavation and Refilling the Trench .(Material to be approved before execution) for Generator Supply |
| 95 | Supply/Installation/Testing and Commissioning of CPRI Approved (IS/IEC:61439) Main Controlling Panel,fabricated out of heavy gauge sheet steel ,dully Painted with powder coated paint ,dust protected ,earth terminal fitted on epoxy cleats, volt meter & Ammeters with selector switch & CT Coil of required ratio with all necessary connections & inner wiring of panel on both heating and lighting circuits. The switches are connected with bus bars inside panel & manufacturer CPRI Certified.The switch are adjustable type made of Havells/ L&T/ABB/Legrand/Siemens Make and change over switch should be of Havells/ L&T/Legrand/ Schneider Make.(1) Normal Incomer:a) 250 Amp-4-Pole ,50kA C-CURVE MCCB with extended terminals Havells/L&T/Legrand/Schneider Make as approved=01 No. b) 400 Amps TPN Al. Bus Bar Set = 01 Set,Digital Voltmeter ,Ammeter ,C.T Coils with Selector Switch & Phase indicator Set.125 Amp. 4-pole changeover tp bypass between main supply and generator supply.Outgoing:(1) Normal outgoing for Heating/AC/Lighting/Inverter etc load(a) 63-Amp DP MCB = 12 No. for Heating Sub-main.(b) 40-Amp DP MCB= 12 No. for Lighting/Machine Sub-main |
| 96 | SITC of 32A Industrial type metal clad/Modular AC Box socket outlet with inter connections in heavy gauge powder coated duly fitted on wall with 32 Amp D.P MCB and 240 A 3 pin plug top complete with connections |
| 97 | ENVIRONMENTALLY SAFE MAINTENANCE FREE COPPER Rod EARTHING SYSTEM Necessary soil treatment is to be made by the contractor in order to improve the Pit resistance Value .Supplying, Installation and Testing of 75 mm copper Pipe Filled with Crystallineconductive Mixture with Eco friendly GEM Backfill Compound 2No. Bags also having Earth pit chamber (300mm x 300mm) with man- hole cover for the above. Including cost of 2OMM Wide copper strip as required in one run fitted with of brass nut bolt & spring washer from EARTHING ROD up to MAIN Control PANEL through DWC High Density Poly ethylene Pipe having Corrugation complete job |
| 98 | DG Set and Servo Stabilizer |
| 99 | Supply, installation, mechanical erection, testing and commissioning of three phase 62.5 KVA diesel generator set KIRLOSKAR/Cummins/Mahindra make, turbo charged developing required BHP 1500 RPM under NTP with 10 % overloading factor, six cylinder engine with 175 HP, with microprocessor based digital display genset engine controller for monitoring, metering, protection, control system etc. conforming to latest Govt. Emission norms CPCB-IV, ( Complete job) |
| 100 | Carrying out foundation of PCC type, cement concrete to be carried in 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)in foundation of DG set etc including frame work/Canopy etc as required the job also includes supply and carriage etc of the requsite material upto the site. |
| 101 | Supply ,installation ,testing , &commissioning of 100 KVA 3 -Phase SERVO controlled VOLTAGE Stabilizer of Approved brand with following SPECIFICATIONS :(1). INPUT VOLTAGE: 156 Volt -450 Volts P-P (90V-260V N-P) (2) OUT PUT VOLTAGE : 400Volts+ 1%(230VAC)(3) Winding Material Insulation : 99.97% PURE COPPER WOUND FIBER GLASS (4). IN DOOR TYPE(5). COOLING :OIL 1S 335(6).MICRO CONTROLLED TRUE RMS Based LCD display (7). Protections are Over Load COPPER wound of Electric Field /Alba /AE /Cosco/Eq.make etc ISI/1SO certified for smooth functioning/ constant voltage supply having Technical Specifications : Input voltage= 90-260 volts & output voltage=220 volts+ - 2%Buck Boost Transformer Copper wound 99.9% ,OIL Immersed COOLING OIL ,High cut/Low Cut /Time delay / Over Cut through Micro Control and Spike Protection including ,Carriages ,installation charges , testing & taxes complete job alongwith servo bypass switch of adequate rating. |
| 102 | Supply/Installation/Testing and Commissioning of 100 Amp Four Pole manual bypass changeover switch of Havells / Siemens/ ABB /Schinder /L&T/Eq make |
| 103 | Mechanical Work |
| 104 | Pipes and Accessories |
| 105 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges,tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : |
| 106 | 25 mm dia |
| 107 | 50 mm dia |
| 108 | Providing, Laying, Testing and commissioning of Galvanised MS Pipeing of Class B dia 25 mm complete with all fittings etc. |
| 109 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of sizes as required: |
| 110 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required: |
| 111 | 100mm |
| 112 | Supply and Fixing of Orrifice Plate made out of thick SS-304 With orrifice of required size to be fitted between flange and landing valve of internal hydrant to reduce pressure at the outlet to the level of 3.5Kg/Cm2 complete as required. |
| 113 | Supply, installation, testing and commissioning of ball valve, full bore type, made of brass/forged steel, with PTFE seats, suitable for fire fighting system, having threaded/flanged ends, including all fittings, jointing and fixing complete as required. |
| 114 | Providing, Installation, Testing and commissioning of NRV of required size, complete with rubber gasket, GI Bolts, nuts, washers etc as required. |
| 115 | 100mm |
| 116 | Supply, installation, testing and commissioning of automatic air release valve, suitable for fire fighting piping system, single/double orifice type, having CI/DI body with SS internals, flanged/screwed connection, complete with necessary fittings, jointing material and accessories, installed at high points of the pipeline as required. |
| 117 | Supply and Fixing Single Headed Internal Hydrant Valve with instantaneous GunMetal/Stainless Steel Coupling of 63mm dia with Cast Iron Wheel and IS Marked conforming to IS-5290 (Type-A) with black Gunmetal/SS Cap and chains as required. |
| 118 | Providing, supplying, installing, testing and commissioning of 2-way Fire Brigade Connection (Breeching Inlet) comprising two instantaneous gunmetal/brass inlets with caps and chains, common body with required outlet, including NRV, a drain valve, and MS cabinet with glass front painted fire red, complete with all fittings, accessories, fixing, and connection to main riser, as per fire safety standards(NBC Guidelines). |
| 119 | Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. |
| 120 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red,conforming to IS 884 complete with the following as required.20 mm nominal internal dia water hose thermoplastic(Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle.Drum (Swing Type) and brackets for fixing the equipmets on wall.Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. Total Length of hose=30meter |
| 121 | Providing and fixing Weather proof hose cabinets and fabricated from 16 g MS sheet with full glass door and locking arrangement, suitable to accommodate Hose reel drum with 40m hose. The cabinet shall be painted with one coat of primer and finished stove enamelled \\"Fire Red\\", \\"Fire Hose\\" written on front including suitably mounted on a raised masonry platform as required. (Size as required). |
| 122 | Supply, installation, testing and commissioning of pressure gauge of range 0–10 bar, 100 mm dial size, glycerin-filled, having brass/SS wetted parts, bottom connection, accuracy class 1.6, complete with gunmetal isolation valve, nipple, and fittings, suitable for firefighting pump lines including jockey pump and terrace line, as required. |
| 123 | SITC of HDPE(5 Layer) Raw Water Tank of 2000 Liter Capacity with all acessories/fittings to be installed at the Terrace of the quarter along with interconnection. |
| 124 | SITC of outdoor water pipe insulation glass wool along with chicken mesh and Aluminium cladding of 24 guage |
| 125 | 50mm dia (50mm thick 750 GSM) |
| 126 | 25mm dia (25mm thick 750 GSM) |
| 127 | Pumps and Electrical Accessories |
| 128 | Supplying, installation, testing and commissioning of Electric driven Terrace Pump suitable for automatic operation and consisting of following, complete in all respects, as required :(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.(b) Suitable HP Squirrel cage induction motor, TEFC, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55protection for enclosure, horizontal foot mounted typewith Class-'F' insulation, conforming to IS-325.(c) M.S. fabricated Common base plate, coupling, couplingguard, foundation bolts etc. as required.(d) Suitable cement concrete foundation duly plasteredwith anti vibration pads.(e) flow 900 LPM at 35m head. |
| 129 | Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft,mechanical seal conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation,conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.Suitable cement concrete foundation duly plastered and with anti vibration pads.180 LPM at 56m Head. |
| 130 | Providing, Supplying, Installation, Testing and Commissioning 0f 2 HP centrifugal/monoblock pump suitable for supplying water to Terrace tanks of the Fire fighting system having capacity approx. 50-100 LMP and head 10-20 meter (or as per site requirement), operating on 230V single phase 50 Hz power supply, complete with CI/SS body, Brass/SS impeller, TEFC motor, incl all necessary accessories such as base frame, suction and delivery piping, ball valves, foot valve with strainer, non return valve on delivery side, electrical connections with starter/switch, vibration pads and all allied works required for proper functioning complete in all respects. |
| 131 | Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :Main Incommer: MCCB 63 amp four pole 36 kA thermal release, spreder link 63 amp, rottary handle 63 ampOutgoing: MCB 40 AMP TP, MCB 16 AMP TPFire pump and Jockey pump contactor mnx 40 amp for main fire pump(1No.)contactor mnx 18 amp for jockey pump(1No.) over load relay 14-23 (1No.) over load relay 4.5-7.5 amp (1No.) auxilary blocks (1No.) push switch (4Nos) emergency push batton (1No.) indicators (6No.) pvc channel 45x45 (1No.) mcb channel (1No.) selector switch for auto manual and off (1No.) terminal block (9No.)Protection single phase preventor (1No.)ACCESSORIES cable thimble hardware, enclosure 2 mm gasket tape roll cabinet with powder coating 24\\"x18\\"x10\\" fabrication charge |
| 132 | Providing and fixing PVC insulated unarmored copper/ Al conductor cables from rnain panel board to various equipment's through walls/ceiling within appropriate pvc conduits with clamps and fixine arranqements. |
| 133 | 2.5 sqmm Four Core, Copper Conductor, XLPE Insulated, Unarmoured Cable (Panel to main fire Pump) |
| 134 | 1.5 sqmm Two Core, Copper Conductor, XLPE Insulated, Unarmoured Cable (Panel to jockey Pump and terrace tank water supply pump) |
| 135 | Supplying and Laying of PVC Conduits (25mm). |
| 136 | Earthing of all equipment with GI Earthpipe 4.5m long 40mm dia including acessories and providing masonary enclosure with cover plate having locking arrangement as watering pipe etc as required. |
| 137 | Fire Extinguishers |
| 138 | SITC of various type of Fire Extinguishers with all allied items/ fixtures where ever needed and warranty period of at least 05 Years. |
| 139 | CO2 Fire Extinguisher on wheels with Aluminium body – 6.5 Kg; suitable for Class B, C, and electrical fires; CE, LPCB & ISI certified |
| 140 | ABC Powder MAP 90 Fire Extinguisher Wall Mounted Type with automatic and manual discharge – 6 Kg - Effective against multiple fire classes; CE, LPCB & ISI certified |
| 141 | Fire Detection/Alarm System |
| 142 | Supplying, installation, testing & commissioning of manual call boxes of MS Construction in Surface/recess with SS Chain and hammer assembly complete with glass and push button etc. as required. |
| 143 | Supplying, installation, testing & commissioning of heat detector operating at 54°C/57°C with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required. |
| 144 | Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. |
| 145 | Supplying, installation, testing and commissioning of response indicator on suface/recess MS box having 2 LEDs metallic cover complete with all connections etc as required. |
| 146 | Supplying, installation, testing & commisssioning of fire alarm sounder with facility to make announcement , mounted in M.S box (16SWG) with hinged cover plate and suitable for operation with amplifier, I/C line matching transformer etc. complete as required. |
| 147 | Supply, installation, testing and commissioning of a 6 Zone Conventional Fire Alarm Control Panel, microprocessor-based, wall-mounted type, suitable for operation on 220–240V AC, 50 Hz, complete with 24V DC sealed maintenance-free battery backup providing minimum 24 hours standby plus 30 minutes alarm operation, housed in CRCA powder-coated fire-red enclosure, having minimum 6 detection zones with zone-wise fire and fault LED indications, along with common indications for power ON, system fault and battery fault; panel shall include control functions such as reset, alarm silence, buzzer silence, lamp test and manual evacuate, with inbuilt hooter/sounder output circuit with short circuit protection, compatible with manual call points, with supervised wiring using end-of-line (EOL) resistors, provision of potential-free contacts for fire and fault for integration with external systems like fire pump panels, and equipped with protections including reverse polarity, short circuit and battery deep discharge protection, complete with automatic battery charger and suitable for residential, commercial and institutional fire detection systems. |
| 148 | Supply and laying of FRLS fire alarm cable, 2 core x 1.5 sq.mm copper conductor, PVC insulated and sheathed, suitable for fire alarm system wiring, laid in surface/recess/conduit as required, complete with termination, dressing and testing. |
| 149 | MS PIPE: Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: |
| 150 | 100 mm |
| 151 | 80 mm |
| 152 | 65 mm |
| 153 | POWER CABLE: Supplying and Laying of one number XLPE insulated power cable of 1.1 KV grade of size i) 25 Sq. mm x 4 Core Aluminium Armoured |
| 154 | HOSE PIPE: Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with Gl wire, rivets etc. conforming to IS 636 (type-A) as required: Gunmetal |
| 155 | BRANCH PIPE: Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required: Gunmetal |
| 156 | Providing and fixing of standard fireman's axe with heavy insulated rubber handle conforming to IS:926 Complete. |
| 157 | AIR VESSEL: Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. |
| 158 | Supply and Making end Termination with Double Brass Compression Gland and Aluminium Lugs for the Following Sizes of PVC insulated and PVC Sheathed/XLPE Aluminium Conductor Cable of 1.1 KV Grade as Required |
| 159 | i) 4C X 25 Sq.mm |
| 160 | ii) 1.5 Sq. mm × 3 Core Copper Armoured |
| 161 | iii) 2.5 sqmm × 3 core Copper armoured |
| 162 | Supply and fixing of illuminated Fire exit signages.This sign may be used to indicate all exits which can be used in the event of an emergency .It shall be accompanied by an arrow as per IS-12349(1988) standards. |
| 163 | Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. |
| 164 | 100 mm |
| 165 | 80 mm Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
