|
| 1 | Detailed survey of site with total station including contouring, fixing of outer points at sites showing road level, boundary walls, power lines, electric poles, telephone lines, adjacent building with details, other existing structures (temporary or permanent ), sewer lines, septic tank, main plumbing lines, nallahs or drains, rivers, water bodies, wells, water logging areas as may be required depending upon the site conditions and topography of the area. (survey map to be provided in soft copy along with 05 no. hard copies on required size paper). The work also includes following: i) Prepration of L-Section and Cross Section of Roads proposed in Industrial Area.ii) Carrying out survey of plots, blocks, ROW, service land, green belt, dumping yard, open land etc. with Differential Global Positioning System (DGPS) instrument including the marking of the corners of the above lands for which demarcation pillars are to be constructed. Contractor will provide computerized drawing and print sets of required size colour print and soft copy in CD along with original download datas. The work includes super imposition of layout plan and khasra map over it as per direction of engg. in-charge.. |
| 2 | Clearing and Grubbing Road Land, Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MoRTH Specification Clause 201., By Mechanical Means, In area of thorny jungle |
| 3 | Excavation for roadway in ordinary rock with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, transporting to embankment site with a lift upto 1.5 m and lead upto 1000 m, trimming bottom and side slopes in accordanc |
| 4 | Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections. |
| 5 | Construction of embankment with approved materials deposited at site obtained from roadway cutting and excavation from drain and foundation or other structures graded and compacted to meet requirement of Tables 300-1 and 300-2 as per MoRTH Specification C |
| 6 | Granular Sub-Base with Close Graded Material (Table:- 400-1), For Grading-III Material |
| 7 | Wet Mix Macadam, Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400-12 & 400-13 and MoRTH Specification Clause 406., By Mechanical Means with all lead |
| 8 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.30 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per MoRTH Specification Clause 503. |
| 9 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base(WBM/WMM) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per MoRTH Specification Clause 502 |
| 10 | Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tones per hour using crushed aggregates of specified grading, premixed with bituminous binder minimum @ 4.0 & 4.5 percent by weight of, Grading - II (26.50 mm (Nominal Size)) |
| 11 | Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder minimum @ 5.2 & 5.4 per cent of mix and f, for Grading-II(13 mm nominal size) Bitumen (VG-30) |
| 12 | Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160\\" C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements. |
| 13 | Precast Box Culvert - Providing and Fixing in position precast cement concrete Box - Culvert as per design and shape using coarse aggregate and fine aggregate derived from natural resources, ordinary portland / admixture as per design mix IS 456-2000 and standard like Indian standard international standard viz Japanese Industrial Standard (JIS) / Providing and Fixing in position precast reinforced cement concrete Box -Culvert or Cable Crossing Boxes as per design and shape, using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /PortIand flag cement, admixture* in recommended proportions as per IS: 456-2000 and standard like Indian standard international standards viz. Japanese Induslrial Standards (JIS)/ US standard/EU standard having of strength not less than M-50. using Thermo-Mechanically created bars (TMT/TMX) FE SOOD or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 32.5 zones with earth cushion 0.20 m to 3.00 m for heavy vehicle movement. Precast reinforced cement concrete drains using, service Crossing / stormwater etc. Rale includes aII cost of material, labor charges at the plant, cost of reinforcement formwork and lifting accessories, and transportation up Io work at fhe site. Rate excludes unloading lhe material at site, bids, and lift. All work up to plinth level: making necessary holes of required sizes for carrying lhroug h service lines etc., providing steel hooks for lifting, etc. .the work exciting as per the direction of Engineer in-charge. Nole: Rate shall also include technical assistance for the installation of producls at one time., 1000 X 1000 |
| 14 | 2, Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available :, Ordinary rock |
| 15 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level., 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 16 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:, Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 17 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level., M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). |
| 18 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :, 25 mm thick |
| 19 | Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding:, New work (Two or more coats applied @ 3.84 kg/10 sqm). |
| 20 | Providing and laying pitching on slopes laid over prepared filter media as per drawing and MoRTH specifications Clause 2504.2.1Stone/Boulder |
| 21 | Pointing on stone masonry in cement sand mortar 1:3 (1 cement : 3 sand) :, Flush / Ruled/ Struck or weathered pointing. |
| 22 | Stone slab roofing on ground floor with fine grained stone slab from approved quarry including filling of joints of parapet and slab on both sides in cement sand mortar 1:4, with ceiling pointing in cement sand mortar 1 : 3 complete as per specification |
| 23 | Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row, 300 mm dia |
| 24 | 2, Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available :, Ordinary rock |
| 25 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level., 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 26 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:, Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 27 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level., M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). |
| 28 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :, 25 mm thick |
| 29 | Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding:, New work (Two or more coats applied @ 3.84 kg/10 sqm). |
| 30 | Lettering with black Japan paint of approved brand and manufacture. Please Enable Macros to View BoQ information |
