|
| 1 | M&L for preparation of old distempered and painted surfaces including washing, stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, removing nails from wall surfaces etc and applying one coat Distemper oil emulsion complete all as specified and directed. |
| 2 | M&L Preparation of old distempered and painted surfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of Distemper oil emulsion on wall surfaces to achieve smooth surface without visiable of brush/hair mark complete all as specified and directed . |
| 3 | M&L for preparation of old decorated plastered surfaces of ceiling and applying one coat of distemper oil emulsion on ceiling complete all as specified and directed. |
| 4 | M&L for preparation of old decorated plastered surfaces of ceiling including cornices, plasters etc and applying one coat of white wash complete all as specified and directed. |
| 5 | Complete removal existing treatment and applying 2mm thick of Birla white putty after prepration of old plastered surfaces of wall complete all as specified and directed. |
| 6 | M&L for preparation of old decorated surfaces of walls (plastered or unplastered) and cornices, by brooming down , scrapping down smoke soot, moss and efflorescent salts if required and applying One coat of cement base paint on surfaces of wall complete all as specified and directed. |
| 7 | M&L for preparation of old decorated surfaces of walls (plastered or unplastered) and cornices, by brooming down , scrapping down smoke soot, moss and efflorescent salts if required and applying two coat of cement base paint on surfaces of wall complete all as specified and directed. |
| 8 | M&L for preparation of old decorated surfaces of walls (plastered or unplastered) and cornices, by brooming down , scrapping down smoke soot, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white wash on walls complete all as specified and directed. |
| 9 | M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 10 | M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 11 | M&L for preparation of old painted wooden surfaces of any description n.exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 12 | M&L for French polishing on surface of any description, width or grit including cleaning and preparation the surface including a coat of wood filler with two or more coats all as specified and directed. |
| 13 | M&L preparation of old painted steel roof surfaces of CGI sheet, over 10cm in with or girth and applying one coat of synthetic ename roof paint complete all as specified and directed. |
| 14 | M&L Non-skid ceramic colour tiles (premium/special quality) 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:6 including dismanthing floor/hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and as directed. |
| 15 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished fair and even complete all as specified and directed.of tile including dismanthing floor/hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and as directed. |
| 16 | M&L Vitrified ceramic tiles light shade, 10 mm thick (square/rectangular) polished, area of each tiles n. exc 0.36 Sqm in floors, set and jointed in cement slurry and pointed in white or colour cement to match over and including screed bed 15 mm thick in cement sand mortar 1:4 including dismanthing floor/hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and as directed. |
| 17 | M&L Vitrified ceramic tiles light shade, 10 mm thick (square/rectangular) polished, area of each tiles n. exc 0.36 Sqm in vertical surfaces such as dado, skirting and riser etc, set and jointed in cement slurry and pointed in white or colour cement to match over and including 10 mm thick backing course in cement sand mortar 1:4 including dismanthing floor/hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and as directed. |
| 18 | M&L Glazed ceramic colour tiles of size 450 x 300 x 7mm thick (premium/special quality) in vertical wall etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 including dismanthing floor/hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and directed. |
| 19 | M & for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of existing surface complete all as specified and directed. |
| 20 | M&L for rounding to edges of stone slabs one edge, such as in steps cooking plateform, and other similar situation complete all as specified and directed. |
| 21 | M&L for 10mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement including Taking down cement plaster in cement including removal of debries outside MoD land all specified and directed. |
| 22 | M&L for 5 mm thick plaster in cm (1:4) on fair faces of concrete surfaces of ceiling including finishing even & smooth without using extra including Taking down cement plaster in cement including removal of debries outside MoD land all specified and directed. |
| 23 | M&L for solid block walling with PCC solid blocks (1:3:6) type C1 (20 mm graded aggregate) exc 10 cm in width and setting in cement mortar (1:6) including demolition of PCC block walling of any description and in any position not oher wise described specifically provided complete all as specified and directed. |
| 24 | M&L for preparation of new plastered surface and applying two coat of white or tinned with cement base paint over priming coat on exterior wall complete all as specified and directed. |
| 25 | M&L for preparation of new plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed. |
| 26 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as including dismantling corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof cverings complete all as specified and directed. |
| 27 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as including dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 28 | M&L 2nd class HW plain fillets square rectangular triangular in section, clean sawn secured with nails sectiona area exc. 13 sqcm but n.exc 25 sqcm including dismantling of existing surface complete all as specified and directed. |
| 29 | S& F of 4 mm thick Non asbestos cement plain building boards, fixed to timber framework with screws fixed in ceiling,flat or sloping including dismantling of ceiling board of any description complete all as specified and directed. |
| 30 | M&L 2nd class HW plain fillets square rectangular triangular in section, clean sawn secured with nails sectiona area exc. 6 sqcm but n.exc13 sqcm complete all as specified and directed. |
| 31 | M&L 2nd class HW plain fillets square rectangular triangular in section, clean sawn secured with nails sectiona area exc 3 sqcm & n.exc 6 sqcm complete all as specified and directed. |
| 32 | S&F 2nd class HW boarding 20mm thick fixed with nails as in eaves board planed one side with butt joint including dismantling boarding of any description complete all as specified andas directed. |
| 33 | S&F of 2nd class hardwood scantling, clean sawn in any position and any description as in unframed work including dismantling of timber scantling 40 sqcm and over in section in any position complete all as specified and as directed. |
| 34 | S&F in repair of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls including clamps for securing pipe complete all as specified and directed. |
| 35 | S&F in repair 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls including clamps for securing pipe complete all as specified and directed. |
| 36 | S&F in repair 110 mm bore PVC (SWR) branch piece, single (Single ‘Y’ or 'T') equal or unequal complete all as specified and directed |
| 37 | S&F in repair 110 mm bore PVC (SWR) reducers complete all as specified and directed. |
| 38 | S&F in repair 110 mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 39 | S&F in repair for 75 mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 40 | S&F in repair for 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all specified and as directed. |
| 41 | S&F 15 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors including taking down up or down complete all as specified and directed. |
| 42 | Refixing GI Tubing 15mm bore old steel tubing and connections in new or old position including tacking down complete all as speicified and directed. |
| 43 | S&F 20 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors including taking down complete all as specified and directed. |
| 44 | Refixing GI Tubing 20 mm bore old steel tubing and connections in new or old position including tacking down complete all as speicified and directed. |
| 45 | M&L for Cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc. in stone / brick masonry wall built in cement mortar and making good, disturbed surface in Cement mortar 1:3 complete all as specified and directed. |
| 46 | S&F 500 litres capacity double layer, rotational molded, polythene (white colour), double layer water storage tank, ISI Marked (Cylindrical vertical with closed top),colour white , hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including dismantling complete all as specified and as directed. |
| 47 | S&F 1000 litres capacity white double layer, rotational molded, polythene water storage tank, ISI Marked (Cylindrical vertical with closed top),colour white , hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and dismantling water tanks complete all a specified and as directed. |
| 48 | S&F in repair 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed. |
| 49 | S&F in repair 15 mm bore CP fancy type bib tap long body cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 50 | S&F in repair Stop valves 15mm dia fancy type, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both ends for iron pipe or for unions and fixed (concealed type) complete all as specified and directed. |
| 51 | S&F in repair bib tap of 15 mm dia in PTMT any colour high pressure screwed for iorn pipe and fixed. (minimum weight 90 gm) complete all as specified and as directed. |
| 52 | S&F in repair Stop valve of 15mm dia in PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 90 gms) complete all as specified and as directed. |
| 53 | S&F in repair of 15mm dia pillar taps fancy type, cast copper alloy, with capstan heads chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts screwed for iron pipe fixed complete all as specified and directed. |
| 54 | S&F in repairs PVC Connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed. |
| 55 | S&F in repairs to 600 mm long PVC flexible Waste pipe to WHB/urinals/Sink complete all as specified and as directed. |
| 56 | S&F in repairs to stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen withplug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915 mm X 460mm with bowl size 410mm X 330mm X 160mm, complete all as specified and directed. |
| 57 | S&F in repairs stainless steel kitchen rack of size 24”x 36”x 10” Prayag cat part No PS3 complete all as specified and directed. |
| 58 | S&F in repair PVC low level white flushing cistern 9/10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, brass screws, handle, 32 mm dia PVC flush pipe of suitable length and making all connection and making good disturbed surface complete all as specified and directed. |
| 59 | S&F in repairs Vitreous China wash down water down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 60 | S&F in repair Vitreous china squatting pan of pattern Orissa Pattern of size 580x 440 mm white with 110mm bore PVC ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe including placing in position in floor and embedded in cushion of PCC type E2 ( 1:5:10, using 40 mm graded stone aggregates), and finishing the top surfaces to match with the existing flooring as in repairs complete all as specified and directed. |
| 61 | S&F in repairs to ABS Body Health Faucet with Rubbit cleaning system, 1.25 metre long easy flex tube in chrome finish & wall hook , fixed in position complete all as specified and directed. |
| 62 | S&F in repair stainless steel decorative pattern holder/end brackets suitable for drapery rod of 25 mm dia complete all as specified and directed. |
| 63 | S&F in repair stainless steel decorative pattern end support suitable for drapery rod of 25 mm dia complete all as specified and directed. |
| 64 | S&F in repair 25 mm dia stainless steel drapery rod not less than 1mm thick cut to size and fixed in position, including Standard screw complete all as specified and directed. |
| 65 | S&F in repair Vitreous china wash hand basin, white, flat back of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, as in repairs, complete all as specified and directed. |
| 66 | S&F in repair brass chromium plated tubular towel rail 600mm long between the flanges and 20mm dia complete all as specified and directed. |
| 67 | S&F in repair Brass CP wall mixer for mixing hot & cold water screwed down for 15mm dia iron pipe and fixed complete all as specified and directed. |
| 68 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 69 | S&F in repairs corner glass shelf with bracket complete all as specified and directed. |
| 70 | S&F in repair Plastic water closet seat, white, closed pattern hydraulic seat cover for wall hung water closet complete all as specified and directed. |
| 71 | Taking down chowkhats or frame with shutter without taking off shutter from the frame n exc 1.50 sqm each & removing from site complete all as specified and directed. |
| 72 | Taking down chowkhats or frame with shutter without taking off shutter from the frame exc 1.50 sqm but not exc 4 sqm each & removing from site complete all as specified and directed. |
| 73 | Taking down shutter of any description n.exc 1 Sqm each & removing from site of work complete all as specified and directed. |
| 74 | Taking down shutter of any description exc 1 Sqm & n. exc 2 Sqm each & removing from site of work complete all as specified and directed. |
| 75 | S&F 2nd class HW plain solid straight chowkhats/frame wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 76 | Supply and fixing 2nd class HW 35mm thick plain framed panelled shutters (any number of panels), with panel of timber flats on both sides or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed. |
| 77 | S&F 2nd class HW 30 mm thick Glazed and skeleton window or ventilator shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares (with sash bars any numbers), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 78 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed. |
| 79 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 80 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed. |
| 81 | S&F Anodised aluminium window and ventilator shutters, movable (minimum two track) type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, handle , rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed. |
| 82 | S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 83 | S&F in repairs door closer hydraulically regulated, cast iron body, designation no. 3, universal type, suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified and as directed. |
| 84 | S&F in repair mild steel as a small article as a hold fast or similar items complete all as specified and directed. |
| 85 | M&L for PCC 1:3:6 type C1 (using 20mm graded aggregate) as in steel frame filling/hold fast blocking incl necessary form work complete all as specified and directed. |
| 86 | S&F in repairs for 100 mm size butt hinges cold rolled medium weight for door shutters complete all as specified and directed. |
| 87 | S &F in repairs for 150mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 88 | S&F in repairs for 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 89 | S&F in repairs for 75 mm size butt hinges cold rolled medium weight for windows/ventilators complete all as specified and directed. |
| 90 | S&F in repairs for 150 mm size MS barrel tower bolt stone enamelled black with bright bolt complete all as specified and directed. |
| 91 | S&F in repairs for 100 mm size MS barrel tower bolt stone enamelled black with bright bolt complete all as specified and directed. |
| 92 | S&F in repairs for 150 mm size MS pressed handle oval type stove enameled block complete all as specified and directed. |
| 93 | S&F in repairs for 100 mm size MS pressed handle oval type stove enameled block complete all as specified and directed. |
| 94 | S&F Mild steel sliding door bolts of size 250 mm, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 95 | S&F in repairs galvanised MS wire cloth 0.56mm nominal dia of wire and average width aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 96 | S&F in repairs for galvanised MS wire cloth 0.56mm nominal dia of wire and average width aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 97 | S&F 3mm thick sheet glass ordinary quality & glazing with oil putty or fitted with wooden beads in squares n.exc. 0.50 sqm in each pane including hacking out old broken glass with puty or fixed with wooden bends complete all as specified and directed. |
| 98 | S&F 3mm thick sheet glass ordinary quality & glazing with oil putty or fitted with wooden beads in squares n.exc. 0.50 sqm in each pane ncluding hacking out old broken glass with puty or fixed with wooden bends complete all as specified and directed. |
| 99 | S&F 3 mm thick frosted on one side sheet glass ordinary quality & glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane ncluding hacking out old broken glass with puty or fixed with wooden bends complete all as specified and directed. |
| 100 | Resecuring or easing & adjusting without taking down the shutter of any description exc 1 Sam and n.exc 2 Sqm in same opening complete all as specified and directed. |
| 101 | M&L for preparation of wood and wood based materials new surface of any description and girth 10cm wide other wise described applying two coat of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 102 | M&L for 4mm thick ( 03 Nos ply) Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work complete all as specified and as directed. |
| 103 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 104 | Material and labour for providing plain cement concrete with Nano filler 1: cement 1; sand 2: agregate 4 type B1 using 20mm graded stone aggregate as in roof padding laid in slope as per requirement mixed with integral water proofing liquid admixture as per manufacturer's instructions complete all as specified and as directed.Note : (i) Minimum thickness of PCC shall be 30mm. (ii) Integral water proofing liquid admixture shall be measured and paid separately under appropriate item here in after(ii) PCC shall be laid to acheive true slope towards the drain/weep holes.1) Material and labour for applying a coat of Nano technology based water proofing compound (1 part powder : 1 part liquid), of desired consistency with nylon brush1 @ 5 sqm/kg coverage over vertical/horizantal surface of RCC roof and parapet complete all as specified and directed. 2) M&L Water Proofing:a) Surface Preparation - Mild Chipping of the surface, Clean the Surface with Nano Bio wash.b) Providing and applying Nano Water Base Water Proof compound one coats after surface preparation using brush, not containing toxic materials like Pb, Cr, Zn; having defect-free nano-particles with inhibiting characteristics having bacteria killing rate above 98% and anti-fungal properties, with super-hydrophobic properties with contact angle of water more than 75degree , permeable type with elongation (stretch ability) of more than 300%, in a nano-structured self assembled dispersion system with VOC level of less than 1% , 60 micron DFT.c) If ant crack found open and fill the crack with nano carbon base nano plymer Plaster d) If online leackage found seal with Nano magic and apply nano Bond coat. Open the cracks by making ‘V’ groove, filling cracks with Nano Crack Filler.e) Aplly Nano carbon baesed shorter chain Nano Bond Coat f) Use nano wall Plymer high stregth filler to reduce the undulation.g) Apply Nano high penetration Bond coat two coat.h) Providing and applying Nano Barrier Coat Paint/ Nano Water Base Water Proof Paints 2 coats over screed concrete using brush, not containing toxic materials like Pb, Cr, Zn; having defect-free nano-particles with inhibiting characteristics having bacteria killing and anti-fungal properties, with super-hydrophobic properties with contact angle of water more than 750 , with elongation (stretch ability) of more than 300%, in a nano-structured self assembled dispersion system with VOC level of less than 1% , 60 micron DFT per coat.(g) The entire item to be executed through certified specialist firm/expert person with warranty of 5 yrs. |
| 105 | M&L for repair to damaged roof after complete removal existing treatment including padding, cleaning. the surface using wire brush brooming down and applying the following treatment all as directed in order of precedence as stated:-(a) Applying one coat of bituminious primer. (Note:- Bituminous primer shall be 'TANK MASTIC' manufactured by M/S STP Ltd or \\"EMUFALTE\\" Manufactured by M/s Texsa India Ltd)(b) Supply and laying 3 mm thick APP based polymeric membrane of approved manufactured with weight not less than 3.00 Kg/Sqm reinforced with non-woven polyester febric weight not less than 150 gms per Sqm. Polymeric membrance shall be taken to a height of 75mm (minimum) and than inserted inside the groove of parapet wall and shall be finished by a membrance flashing. Note:- Laying APP based polymeric membrane shall be done torch on method as per manufacturers instructions complete all as specified and directed. |
| 106 | M&L for 5mm thick plastering in CM with nano filler 1: Cement 1: Sand 3 on concrete surfaces as in sides of column, lintel, beam, chajja, facia railing, RCC, wardrobe etc including finish the surface even and fair without using extra cement including Taking down cement plaster in cement including removal of debries outside MoD land all specified and directed.Note: Nano material shall be measured and paid separately. |
| 107 | M&L for 20mm thick plastering in CM with nano wall filler 1: Cement 1: Sand 4 in two layers, top layer mixed with integral water proofing liquid admixture as per manufacturers instruction on brick or concrete surfaces of wall finished the surface fair and even including Taking down cement plaster in cement including removal of debries outside MoD land all specified and directed.Note: WPC& Nano material shall be measured and paid separately. |
| 108 | M&L for 15mm thick plastering in CM with nano wall filler 1: Cement 1: Sand 6 on fair face of brick or concrete surfaces, finished the surface fair and even and smooth without using extra cement including Taking down cement plaster in cement including removal of debries outside MoD land all specified and directed.Note: Nano material shall be measured and paid separately. |
| 109 | Supply only nanotechnology based elastomeric hydrophobic powder/admixture(EHP) powder for cement plaster and concrete complete all as specified and directed. |
| 110 | M&L for exposing cracks more than 1mm wide with tile cutter and forming V groves nex 10mm wide and 10mm deep in inside RCC roof and filling nanotechnology based anti-corrosive with higher strength carbon fiber based shorter chain epoxy coating process:a) Clean the surface and open the crack and apply nano base bond coat.b) Mix with nano wall filler with bond coat and fill the crack.c) Apply final bond coat in the cracked surface.Note: 1. Note: Nano material shall be measured and paid separately.2. Rate shall be include for making surface clean, dustfree, dry, and free of wax grease, oil, loose or peeling particle, and other foreign material. |
| 111 | M&L for PCC 1:2:4 Type B0 using 12.5 mm graded aggregate as in levelling course, haunching, coping and similar works of over RCC roof surface including rounded or chamferred on edges etc complete all as specified and as directed. |
| 112 | S&F and applying/laying normal treatment using glass fibre base bitumen felt, grade 2 on roof sheets or roofs complete all as specified and directed. |
| 113 | M&L Water Proofing:a) Surface Preparation - Mild Chipping of the surface, Clean the Surface with Nano Bio wash.b) If onlinr leackage found seal with Nano magic and apply nano Bond coat.Open the cracks by making ‘V’ groove, filling cracks with Nano Crack Filler. c) Aplly Nano carbon baesed shorter chain Nano Bond Coat d) Providing and applying Nano Water Base Water Proof compound one coats after surface preparation using brush, not containing toxic materials like Pb, Cr, Zn; having defect-free nano-particles with inhibiting characteristics having bacteria killing rate above 98% and anti-fungal properties, with super-hydrophobic properties with contact angle of water more than 75degree , permeable type with elongation (stretch ability) of more than 300%, in a nano-structured self assembled dispersion system with VOC level of less than 1% , 60 micron DFT.e) If ant crack found open and fill the crack with nano carbon base filler and bond coat.and use nano wall filler to reduce the undulation.f) Apply Nano high penetration Bond coat two coat.g) Providing and applying Nano Barrier Coat Paint/ Nano Water Base Water Proof Paints 2 coats over screed concrete using brush, not containing toxic materials like Pb, Cr, Zn; having defect-free nano-particles with inhibiting characteristics having bacteria killing and anti-fungal properties, with super-hydrophobic properties with contact angle of water more than 750 , with elongation (stretch ability) of more than 300%, in a nano-structured self assembled dispersion system with VOC level of less than 1% , 60 micron DFT per coat.(h) The entire item to be executed through certified specialist firm/expert person with warranty of 5 yrs. |
| 114 | M&L for PCC (1:5:10) type E2 using 40mm graded stone aggregate in foundations, filling and mass concrete, sunken floors complete all as specified and directed. |
| 115 | Material and labour for appplying NANO magic in sealing floor traps, waste pipes outlets from wall, complete all as specified and directed. |
| 116 | Repair to sunken per 1 sqm area including taking down plater/rendering, cleaning, sweeping removing dust and mud, or water, scoring sunken surfaces of bathroom/toilet etc and filling or levelling of roof surface by using concrete (1:2:4, with WPC over 0.90mm polythene sheet) CM 1:3 rendering and neeru finish to plastering as specified and make sure sunken is water proof by ponding of 48hrs complete all as specified and directed. Please Enable Macros to View BoQ information |
