Tender For Installation Of Open Gym In Kodwatand Panchayat F Type Colony Ground Under Block Gomia Bokaro
Tender Value
12.99 Lakhs
Estimated cost
Bid Submission
21 May 2026
0 days left
EMD
26000
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gomia → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Installation Of Open Gym In Kodwatand Panchayat F Type Colony Ground Under Block Gomia Bokaro
BOQ
| Sl. No. | Item Description |
| 1 | CHEST PRESS SINGLE MAIN FRAME: 100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65 MM.ARM HANDLE & REST SEAT FRAME: 25/32 NB JINDAL GI PIPE HAVING WALL THICKNESS OF 2.65 MM.HANDLE COVER : TPEE INJECTION MOULDED.BACK & REST SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2 MM WITH PRECISION PUNCHED HOLE OF 10 MM DIA.BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47 MM & 62 MM. PIPE END CAP: USED FOR 100 NB, 32 NB AND 25 NB. BEARING KIT: HAVING ONE U TYPE MS CLAMP AND BUSH Ø 60 MM AND LENGHTH 72 MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.ALL NUT, BOLTS AND WASHER MUST BE GALVANISED. |
| 2 | ROWER MAIN FRAME: RECT. PIPE 80 X 40 JINDAL MS PIPES HAVING WALL THICKNESS OF 2 MM.ARM HANDLE & LEG FRAME: 25/50 NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65 MM.\HANDLE COVER :TPEE INJECTION MOULDED.BACK & REST SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2 MM WITH PRECISION PUNCHED HOLE OF 10 MM DIA.FASTENERS: USED FOR FIXING THE BASE FRAME.BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47 MM & 62 MM. PIPE END CAP: USED FOR 50 NB.BEARING KIT: HAVING ONE U TYPE MS CLAMP AND BUSH Ø 60 MM AND LENGHTH 72 MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.ALL NUT, BOLTS AND WASHER MUST BE GALVANISED. |
| 3 | AIR RIDER MAIN FRAME:100 NB AND 65 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65 MM.ARM HANDLE & REST SEAT & LEG FRAME: 25/32 NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65 MM.HANDLE COVER :TPEE INJECTION MOULDED.REST SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2 MM WITH PRECISION PUNCHED HOLE OF 10 MM DIA.BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47 MM & 62 MM. PIPE END CAP: USED FOR 65 NB AND 32 NB.BEARING KIT: HAVING ONE U TYPE MS CLAMP AND BUSH Ø 60 MM AND LENGHTH 72 MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.ALL NUT, BOLTS AND WASHER MUST BE GALVANISED. |
| 4 | IR WALKER - SINGLE IR WALKER - SINGLE MAIN FRAME:100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65MM.ARM HANDLE & LEG FRAME: 25/32NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65 MM.FOOT REST SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2 MM WITH PRECISION PUNCHED HOLE OF 10 MM DIA.BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47 MM & 62 MM. PIPE END CAP: USED FOR 100 NB.BEARING KIT: BUSH Ø 60 MM AND LENGHTH 72 MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.ALL NUT, BOLTS AND WASHER MUST BE GALVANISED. |
| 5 | LEG PRESS CUM TWISTER MAIN FRAME:100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65 MM.ARM HANDLE & REST SEAT & LEG FRAME: 25/32 NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65 MM.HANDLE COVER :TPEE INJECTION MOULDED.BACK & REST & TWISTER SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2 MM WITH PRECISION PUNCHED HOLE OF 10 MM DIA.BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47 MM & 62 MM. PIPE END CAP: USED FOR 100 NB, 32 NB AND 25 NB. BEARING KIT: HAVING ONE U TYPE MS CLAMP AND BUSH Ø 60 MM AND LENGHTH 72 MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.ALL NUT, BOLTS AND WASHER MUST BE GALVANISED. |
| 6 | ELLIPTICAL CROSS TRAINNER MAIN FRAME:100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65 MM.ARM HANDLE & FOOT REST FRAME: 25/32 NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65 MM.HANDLE COVER :TPEE INJECTION MOULDED.FOOT REST SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2 MM WITH PRECISION PUNCHED HOLE OF 10 MM DIA.BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47 MM & 62 MM. PIPE END CAP: USED FOR 100 NB, 32 NB AND 25 NB. BEARING KIT: HAVING ONE U TYPE MS CLAMP AND BUSH Ø 60 MM AND LENGHTH 72 MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.ALL NUT, BOLTS AND WASHER MUST BE GALVANISED. |
| 7 | BIG SHOULDER WHEEL MAIN FRAME:100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65MM.ARM HANDLE : 32/20 NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65MM.HANDLE : HANDLE BEARING GRIP.BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47MM & 62MM. PIPE END CAP: USED FOR 100NB.BEARING KIT: BUSH Ø 60MM AND LENGHTH 72MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.ALL NUT, BOLTS AND WASHER MUST BE GALVANISED. |
| 8 | CROSS SKIER MAIN FRAME:100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65MM.ARM HANDLE & FOOT REST FRAME: 25/32/40 NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65MM.HANDLE COVER :TPEE INJECTION MOULDED.FOOT REST SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2MM WITH PRECISION PUNCHED HOLE OF 10MM DIA.BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47MM & 62MM. PIPE END CAP: USED FOR 100NB, 40NB.BEARING KIT: HAVING ONE U TYPE MS CLAMP AND BUSH Ø 60MM AND LENGHTH 72MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.ALL NUT, BOLTS AND WASHER MUST BE GALVANISED |
| 9 | SURFBOARD MAIN FRAME: 100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65MM.ARM HANDLE & FOOT REST FRAME: 32 NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65MM.HANDLE COVER :TPEE INJECTION MOULDED.FOOT REST SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2MM WITH PRECISION PUNCHED HOLE OF 10MM DIA.BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47MM & 62MM. PIPE END CAP: USED FOR 100NB, 32NB.BEARING KIT: BUSH Ø 60MM AND LENGHTH 72MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.ALL NUT, BOLTS AND WASHER MUST BE GALVANISED. |
| 10 | LEG EXTENSION MAIN FRAME:100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65MM.ARM HANDLE & REST SEAT FRAME: 32/50 NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65MM.BACK & REST SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2MM WITH PRECISION PUNCHED HOLE OF 10MM DIA.BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47MM & 62MM. PIPE END CAP: USED FOR 32NB AND 25NB.BEARING KIT: BUSH Ø 60MM AND LENGHTH 72MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.ALL NUT, BOLTS AND WASHER MUST BE GALVANISED. |
| 11 | LEG LIFT POST MAIN FRAME:100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65MM.ARM HANDLE & LEG FRAME: 25/50 NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65MM.HANDLE COVER :TPEE INJECTION MOULDED.BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.PIPE END CAP: USED FOR 100NB, 32NB AND 25NB. ALL NUT, BOLTS AND WASHER MUST BE GALVANISED. |
| 12 | AIR WALKER DOUBLE MAIN FRAME:100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65MM.ARM HANDLE & LEG FRAME: 25/32NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65MM.FOOT REST SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2MM WITH PRECISION PUNCHED HOLE OF 10MM DIA.BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47MM & 62MM. PIPE END CAP: USED FOR 100NB.BEARING KIT: BUSH Ø 60MM AND LENGHTH 72MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.ALL NUT, BOLTS AND WASHER MUST BE GALVANISED |
| 13 | CHEST PRESS DOUBLE MAIN FRAME:100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65MM.ARM HANDLE & REST SEAT FRAME: 25/32NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65MM.HANDLE COVER :TPEE INJECTION MOULDED.BACK & REST SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2MM WITH PRECISION PUNCHED HOLE OF 10MM DIA.BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47MM & 62MM. PIPE END CAP: USED FOR 100NB, 32NB.BEARING KIT: HAVING ONE U TYPE MS CLAMP AND BUSH Ø 60MM AND LENGHTH 72MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.ALL NUT, BOLTS AND WASHER MUST BE GALVANISED |
| 14 | SHOULDER PRESS DOUBLE MAIN FRAME:100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65MM.ARM HANDLE & REST SEAT FRAME: 25/32NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65MM.HANDLE COVER :TPEE INJECTION MOULDED.BACK & REST SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2MM WITH PRECISION PUNCHED HOLE OF 10MM DIA.BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47MM & 62MM. PIPE END CAP: USED FOR 100NB, 32NB.BEARING KIT: HAVING ONE U TYPE MS CLAMP AND BUSH Ø 60MM AND LENGHTH 72MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM. |
| 15 | BACK EXTENSION BACK EXTENSION MAIN FRAME:100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65MM.ARM HANDLE & SEAT REST FRAME: 32/25NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65MM.REST SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2MM WITH PRECISION PUNCHED HOLE OF 10MMDIA. HANDLE COVER :TPEE INJECTION MOULDED.BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47MM & 62MM. PIPE END CAP: USED FOR 32NB.BEARING KIT: BUSH Ø 60MM AND LENGHTH 72MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.ALL NUT, BOLTS AND WASHER MUST BE GALVANISED |
| 16 | CYCLE MAIN FRAME:100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65MM.ARM HANDLE & SEAT REST FRAME: 32/25NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65MM.REST SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2MM WITH PRECISION PUNCHED HOLE OF 10MM DIA.BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47MM & 62MM. PIPE END CAP: USED FOR 32NB AND 25NB.PEDAL: FABRICATED BEARING PEDAL USED.BEARING KIT: BUSH Ø 60MM AND LENGHTH 72MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.ALL NUT, BOLTS AND WASHER MUST BE GALVANISED |
| 17 | ARM & PEDAL BIKE MAIN FRAME:100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65MM.ARM HANDLE & SEAT REST FRAME: 32/25NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65MM.REST SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2MM WITH PRECISION PUNCHED HOLE OF 10MM DIA.HANDLE COVER :TPEE INJECTION MOULDED.BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47MM & 62MM. PIPE END CAP: USED FOR 32NB AND 25NB.PEDAL: FABRICATED BEARING PEDAL USED.BEARING KIT: BUSH Ø 60MM AND LENGHTH 72MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.ALL NUT, BOLTS AND WASHER MUST BE GALVANISED |
| 18 | Earth work in excavation of foundation trenches ordinary soil ( vide classification of Soil Item -A ) and disposal excavated earth as obtained to a distance of 50M including all lifts, levelling,ramming the fopundation trenches,removing the roots of trees,shrubs all complete as per approved design, building specification and direction of E/I. B.C.D. 5.1.1 |
| 19 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not excedding 150 mm thick with all lead and lifts including cost of all materials labour , royalty and taxes all complete as per building specificationsand direction of E/I.B.C.D. 5.1.10 |
| 20 | Providing and laying factory made chamfered edge 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.DSR 16.91.2 |
| 21 | Plain Cement Concrete of Grade M15 in nominal mix of (1:2:4) in open foundation or in road surfacing with required formworks -do- -do- all complete job as per specification and direction of E/I.BCD 5.3.1.2 |
| 22 | Providing designation 75 B one brick flat soling joints with local sand including cost of watering taxes and royalty all complete as per building specification and direection of E/I BCD 5.6.3 |
| 23 | Providing 75B Brickwork in CM(1:6) in foundation and plinth -do- -do- complete job including scaffolging ,raking out and curing all complete job as per building specification and direction of E/I. BCD 5.2.13 |
| 24 | Providing 12mm cement plaster in cm (1:6) in both side wall with clean coarse sand of F.M. 1.5 including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specifica- tion and direction of E/I BCD 5.7.3 |
| 25 | Provding two coats of Snowcem of approbved shade and make over a coat of cement primer on new surface including preparing the plasterd surface smooth with sand paper, scffolding, curing and taxes all complete as per building specification and direction of E/I.BCD 5.8.24 |
| 26 | Carriage of Material Cement |
| 27 | Stone Chips |
| 28 | Bricks |
| 29 | total |
| 30 | GST @18 % |
| 31 | L cess @ 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
May 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedMay 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender