|
| 1 | Earthwork in foundation in dry soil i/c lift upto 1.50m and lead upto 30m including back filling, watering and ramming of excavated earth into the structure and the sides of foundation trenches or into the plinth with removal and disposal disposal of surplus earth as directed by engineer in charge up to 30 meter lead from the foundation. |
| 2 | uprooting jhunds and moonj disposal away from site. |
| 3 | Clearing thick bushes and thorny jungle without uprooting |
| 4 | Earthwork in filling in ordinary soil i/c lead upto 200 m and lift upto 1.50 m with ramming and dressing etc. directed by engineer in charge. |
| 5 | Providing and Laying C.C 1:3:6 (M-10) in foundation & floor including cost of material, labour and T&P |
| 6 | Dismantling brick work or stone work and cement concrete in cement mortar and including stacking of material within a distance of 60M as per direction of Engineer in charge. |
| 7 | Dismantling existing Plaster including disposal of refuse within a distance of 60M. |
| 8 | M-150 Brick work in 1:4 C.M including all cost of material labour and T&P etc complete |
| 9 | Centering and shuttering of R.C.C work including all cost of material, labour and T&P |
| 10 | Steel reinforcement including bending, Binding, Cutting, Placing of reinforcement Material, Labour and T&P |
| 11 | R.C.C 1:1.5:3 (M-20) in slab and abutment including all material, Labour and T&P etc. complete. |
| 12 | 12 mm Thick Cement Plaster IN 1:4 cement coarse sand including cost of material labour and T&P etc complete |
| 13 | Finishing walls with putty (2mm thick) approved brand and manufacture and of required shade and undecorated wall surface to give even shade i/c curing cost of all materials labour and T&P etc. Birla wall putty asian wall putty |
| 14 | Providing and Laying Ceramic glazed / matrix tiles size 300mmx300 & 300mmx600mm (thickness to be specified by the manufacture) of 1st quality conforming to IS:15622 of approved make in colours such as white, Ivory, grey, fume red Brown, laid on 20mm thick cement mortar 1:4 jointing with grey cement slurry @3.3kg/sqm i/c pointing the joint with white cement and matching pigment etc. complete. Kajaria tile somany tile asian tile |
| 15 | Providing and Laying vertified floor tiles in deferent sizes with water absorption less than 0.08% conforming to IS:15622 of approved make in colours and shaes laid on 20mm thick cement mortar 1:4 jointing with grey cement slurry @3.3kg/sqm i/c pointing the joint with white cement and matching pigment etc. complete. Kajaria tile somany tile asian tile |
| 16 | Distempering 1st coat with oil bound distemper of approved brand and manufacture and of required shade on undercoated wall surface to give an even shade over an i/c a priming coat cement primer of approved brand and manufacture such as berger, J&N, shalimar, asian paints after thorough brushing the surface free from mortar dropping and other foreign matters and also including preparing the surface even with plaster of paris or approved synthetic material and sand papered smooth including cost of all materials. asian & berger paint |
| 17 | Supplying and fixing Main Steel Gate of 4.00X2.00 & slide steel gate of 1.50x2.00 on Rectangular hollow section pipe with one coat of red oxide primer & Painting with synthetic enamel paint of approved brand and manufacture to give an even shade including cost of all material labour and T&P etc. 738.22 KG Weight |
| 18 | finishing with epoxy paint (two or more coats) at all locations prepared and aplied as per manufactures specifications i/c appropriate priming coat preparation of surface, etc. complete |
| 19 | providing and fixing stainless steel (Grade304) railling made of hollow tube,channel,plates etc. i/c welding grinding, buffingpolishing and making curvature (wherever required) and fitting the same with necessary stainless steel nut and bolt complete i/c fixing the railing dash fasteners etc.stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer in charge. (for payment purpose only weight of stainless steel member shall be considered excluding fixing accessories such as nuts, bolts, fastners etc.) |
| 20 | Supplying and fixing 4.5 cm thick teak wood part panelled and part glazed door and window shutter i/c supply and fixing anodised cleats and stops and i/c fixing and adjustment of bolt, locks, handles spring and other fitting but excluding their supply and i/c painting with two coats of black japan on all iron fitting necessary i/c fixing the glass panels with putty of brand glass and glass to be 4mm thick fitting with necessary crews to be supplied by the deptt. |
| 21 | C.P. Teak wood wrought framed and fixed i/c simple moulding straight work as in chowkhats i/c supply of all materials labour Tools & plants etc required for proper completion of work. |
| 22 | Construction of Granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compaction with vibratory roller to achieve the desired density, complete as per clause 401, SL-4-II, of MORD specification |
| 23 | Laying of I shaped precast interlocking tiles of thickness 60 to 100mm (compressive strength not less then 30mpa and weight 4.50 kg) including 25mm thick local sand base levelling and dressing of surface to required level and slope,filling joints with local sand all complete work. |
| 24 | Supply & fixing of information board including writing, material, Labour etc completion of work |
| 25 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.As per DSR 2022 E&M Item 1.10.1 |
| 26 | Supplying and fixing following modular switch /socket on the existing modular plate & switch box including connection but excluding modular plate etc. as required. |
| 27 | 15/16 A switch |
| 28 | 6 pin 15/16 A socket outlet |
| 29 | Supplying and fixing following Size/modular GI box alongwith modular base and cover plate for modular switches in recess etc. as required. |
| 30 | 4 module (125mmx75mm) |
| 31 | wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. |
| 32 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire. |
| 33 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 34 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire. |
| 35 | 2 X 10 sq. mm + 1 X 6 sq. mm earth wire. |
| 36 | Supplying and drawing following size of FRLS PVC insulated Copper conductor single core cable in the existing surface/recesses steel/ PVC conduit as required |
| 37 | 2 X 1.5 sq. mm. |
| 38 | 2 X 2.5 sq. mm. |
| 39 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required |
| 40 | Supplying and fixing PVC batten/angle holder including connection etc as require |
| 41 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. ( Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) |
| 42 | 8 way (4 + 24), Double door |
| 43 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker single pole suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 44 | Installation, testing, commissioning of wall bracket/ceiling fittings/Fan of all size. etc complete. |
| 45 | Supplying and fixing two modular stepped type Electronic fan Regulator on the existing modular plateswitch box i/c connections but excluding modular plate etc. |
| 46 | Regulator |
| 47 | Supplying and fixing following rating, double pole, 240 V, 63 A isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 48 | Supply & Fixing of LED Street light fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90Watt confirming to IP66 protection in all respect. As per up sor item no 1423 catAAA p-254 |
| 49 | Supply & Fixing of Three phase Control panel board with appropriate fixtures and necessary connection etc. complete. |
| 50 | Earthing with G.I earth pipe 4.5 metre long, 40mm dia including accessories complete with all respect. |
| 51 | Types of Miscellaneous Electrical Item that are not included in this estimate will be used as required by the work. |
| 52 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. |
| 53 | Cutting chases in brick masonry walls for pipes and making good the same with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) 100 mm dia metre. |
| 54 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 55 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape,size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 56 | Providing and fixing white vitreous china wash basin 550x400 mm with single 15 mm C.P. brass pillar tap and C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 57 | Providing and fixing water closet squatting pan of size 580x440 mm with integral type foot rests (Indian type W.C. pan) with 100 mm P.V.C. P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required |
| 58 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 59 | Providing and fixing 100x75 mm dia Hubless trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors. As per IS:15905 |
| 60 | Providing and fixing soil, waste and vent pipes |
| 61 | 100 mm dia hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905. |
| 62 | 75 mm dia Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 |
| 63 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. |
| 64 | 100 mm dia Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 |
| 65 | 75 mm dia Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 |
| 66 | Providing and fixing terminal guard : |
| 67 | 100 mm dia Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 |
| 68 | Providing and fixing plain bend of required degree. |
| 69 | 100 mm dia Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 |
| 70 | 75 mm dia Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 |
| 71 | Providing and fixing double equal plain junction of required degree. |
| 72 | 100 mm dia Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 |
| 73 | 75 mm dia Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 |
| 74 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 75 | 20 mm nominal dia Pipes metre — |
| 76 | 25 mm nominal dia Pipes metre — |
| 77 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer-in-charge. |
| 78 | Providing and fixing uplasticised PVC connection pipe 45 cm length, 15 mm nominal bore with brass unions. |
| 79 | Providing and fixing CP Brass Single lever telephonic wall mixer 15 mm nominal dia of quality & make as approved by Engineer in charge. |
| 80 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 81 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 82 | Providing and fixing toilet paper holder |
| 83 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long. |
| 84 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 100 mm diameter each |
| 85 | Providing and fixing M.S. stays and clamps for sand cast iron /centrifugally cast (spun) iron pipes of diameter : |
| 86 | For 100 mm dia pipe |
| 87 | For 75 mm dia pipe |
| 88 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards 15 mm nominal bore. |
| 89 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore. |
| 90 | Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe |
| 91 | 100 mm dia SS 304 grade coupling with EPDM rubber gasket |
| 92 | 75 mm dia 17.57A.2.1 SS 304 grade coupling with EPDM rubber gasket. |
| 93 | P.T.M.T. extension nipple 15 mm dia. |
| 94 | Types of Miscellaneous sanitary Item that are not included in this estimate will be used as required by the work. |
| 95 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : 9.47.1 20 mm dia (heavy type) metre. As per DSR 2023 vol-1 Item 9.47.1 P-153 |
| 96 | Providing and fixing P.V.C. Water Storage Tank Sintex or Equivalent. Required 500b ltr tank |
| 97 | Providing and fixing Stainless steel AISI 304 (18/8) Kithen sink as per IS 13983 with C.I. Brackets and steel plug 40 mm including painting of fitting and brackets, cutting and making good the walls wherever required. |
| 98 | supply & installation of 2 H.P. Submercible pump set including Boring and all fittings cost of all material, labour, T&P and material required for completion of work. Please Enable Macros to View BoQ information |
