|
| 1 | Excavating over areas, n exc 1.5 m deep and getting out in hard / dese soil etc complete all as specified and as directed |
| 2 | Excavating over areas, Exc 1.5 m but not exc 3.0 mtr deep and getting out in hard / dese soil etc complete all as specified and as directed |
| 3 | Excavating over areas, Exc 3.0m but not exc 4.50 mtr deep and getting out in hard / dese soil etc complete all as specified and as directed |
| 4 | Excavating over areas, Exc 4.50m but not exc 6.00 mtr deep and getting out in hard / dese soil etc complete all as specified and as directed |
| 5 | Excavating in trenches n.exc. 1.5 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc. 10 sqm on plan and and getting out in hard /dense soil complete all as specified and directed. |
| 6 | Surface excavation n exe 30 cm deep and averaging 15 cm deep in soft/ loose soil and getting out. |
| 7 | Excavating in trenches n.exe. 1.5 m width and n.exe. 1.5 m in depth for foundation in soft/loose soil & getting out.. |
| 8 | Removing excavated material n exc 50 m & depositing where directed at a level n exc 1.5 m. |
| 9 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick with soil etc complete all as specified and as directed |
| 10 | Removing excavated material exc. 250m but not exc 500 mtr and depositing where directed at a level n exc. 1.5 m above the starting point etc complete all as specified and as directed |
| 11 | M&L for Plain Cement concrete 1:2:4, type B-0 with using (12.50mm graded stone aggregate) as in surface channels and drains complete all as specified and directed. |
| 12 | M&L Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed. |
| 13 | M&L for plain cement concrete 1:4:8 type D-2, with using 40 mm graded stone aggregates as in foundations and mass concrete etc complete all as specified and as directed |
| 14 | M&L for Pre-cast cement concrete block masonry, Type C1 1:3:6 (20 mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in mortar 1:4 , complete etc complete all as specified and as directed |
| 15 | M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings, Chajja kerbs, roof padding/staging of water tank etc including necessary fromwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed |
| 16 | M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed |
| 17 | M&L for broken stone or boulder in loose filling with aggregates of gauge 40 mm to 80 mm size as in filling in rain water harvesting pit etc complete all as specified and as directed. |
| 18 | M&L for broken stone or boulder in loose filling with aggregates of gauge 80 to 150 mm size as in filling in rain water harvesting pit etc complete all as specified and as directed. |
| 19 | M&L M-Sand filling under floors or in foundations including watering and conosoldiation. |
| 20 | M&L for 75 mm thick plain cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in paving/ plinth protection laid in panels including necessary form work, finished rough surfaces of concrete complete all as specified and directed |
| 21 | S&F 110 mm PVC, SWR pipes, single socketed in any length with rubber ring joints laid in trenches or in floors etc complete all as specified and directed |
| 22 | S&F 110 mm PVC, SWR Bends in any radius etc complete all as specified and directed |
| 23 | M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and directed. |
| 24 | M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed |
| 25 | M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and as directed |
| 26 | M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed |
| 27 | M&L cement concrete with PCC type D2 1:4:8 using 40mm graded stone aggregate as in foundation. |
| 28 | M&L for RCC nominal mix Type B1 1:1.5 :3 (using 20 mm graded stone aggregate) for beams, cantilevers, bressumers, lintel over 1.5 m span. |
| 29 | S&F mild steel TMT bar 5 mm dia and over upto and including 10mm dia in strrups as in including cutting, bending and binding with mild steel not less than 0.9 mm dia (annealed) all as directed complete. |
| 30 | Use and waste Form work for foundation footing, bases of columns & plinth beams similar work vertical or batter. |
| 31 | M&L 40 mm thick Damp proof course to horizontal or vertical surfaces including necessary form work in cement concrete 1:2:4 type B-0 (Using 12.5 mm graded stone aggregate) mixed with WPC ( WPC shall be measured & paid separately |
| 32 | M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth. |
| 33 | M&L for 15 mm thick plaster on fair faces of brick work or concrete surface in cm (1:4) with wpc @2% by weight face of conc work to wall surface and the surface is finished even and smooth without using extra cement |
| 34 | Supply only integral WPC |
| 35 | M&L for 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in plinth course as directed by engineer in charge. |
| 36 | M&L for broken stone or boulders of hardcore of gauge n exc 63 mm deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface. |
| 37 | M&L for 100mm thick PCC type D2 1:4:8 using (40mm gradded stone aggregate) as in sub base. |
| 38 | M&L for Pre-polished Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors including screed bed in CM 1:4 complete all as specified and as directed. |
| 39 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube in opening as per specification & as directed. |
| 40 | S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. .frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and as directed. |
| 41 | M&L for Non skid ceramic colour joint free tiles 7 to 8 mm thick area each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in net cement slurry and pointed in white or coloured cement to match incl screed bed 15 mm thick of CM 1:6 . |
| 42 | M&L for Glazed ceramic coloured tiles in vertical surfaces 450x 300x 7 mm thick set and jointed in neat cement slurry & painted in white or colour cement to match incl 10 mm thick backing coat in CM 1:4 . |
| 43 | S&F for anodised powder coated aluminium ventilator with frame of weight not less than 0.75 Kg/ RM and shutter of weight not less than 0.55 Kg/ RM lowers type incl necessary fittings and 4.00 mm thick frosted glass, complete all as specified and directed. |
| 44 | S&F pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified. |
| 45 | S&F roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam tee, angle, channel or flat sections) including clits etc conforming to Fe-410-0 or Fe-310-0. |
| 46 | S&F for Anodised aluminium/ GI snap grid power coated framed work of size 605x605 mm for false ceiling all as specified with hangers 4mm thick GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified and as directed. |
| 47 | M & L for 4mm thick Non Asbestos designed Cement E board incl two coats of distempering in one side incl preparation of new surface of board as approved by GE of size fixed in ceiling as specified and directed. |
| 48 | S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipeincluding providing and fixing plugs, beddings urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. |
| 49 | S&F 150mm long aluminium anodised barrel tower bolts of extruded section |
| 50 | S&F aluminium alloy 200mm anodised sliding door bolts with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast - aluminium alloy and fixed. |
| 51 | S&F 75mm MS butt hinges medium weight |
| 52 | S&F aluminium handle cast type anodised 150mm size |
| 53 | S & F 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors etc complete all as specified. |
| 54 | S & F 25mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors etc complete all as specified. |
| 55 | S&F 20 mm Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed |
| 56 | S&F 15mm bore stop cock/valve cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both end for iron pipe complete. |
| 57 | S&F PVC connector 600mm long with brass coupling in both ends screwed down for iron pipe. |
| 58 | S&F 15mm bore piller tap fancy type cast copper alloy with capstin head CP screwed down high pressure with or without littered 'H' or 'C' with long screwed shank and fly nuts screwed for iron pipe etc complete. |
| 59 | S&F vitreous china wash basin white, flat back, size 550x400mm excluding taps , waste ,but including barkets. |
| 60 | S&F 32mm bore dia Waste coupling of PTMT (half or full threaded) minium weight 45 gms) incl 32mm dia weste pipe |
| 61 | S&F 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromimum plated brass screws and cup washers. |
| 62 | M&L for Granite of any type 20 mm thick machine cut bedded and jointed with grey cement slurry and pointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete incl 20 mm thick screed bed 1:6 CM. |
| 63 | S&F stainless steel Soap dish, any type, fixed to wall with chromium plated brass screws |
| 64 | S&F Aluminium anodised Tubular towel rail, 20mm dia, D type, 60 Cm long between flanges fixed to wall with chromium plated brass screws |
| 65 | S&F 100mm dia PTMT grating. |
| 66 | S&F 75 mm bore PVC (SWR) bends of any radius |
| 67 | M&L 100 mm bore for PVC (SWR) Floor trap with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) |
| 68 | Hoisting & fixing 500 litres Rotational moulded polythylene water stroage tanks (cylindrical vertical with closed top) hoisted & fixed in position all position all as specified in SSR part -I incl all necessary fittings. |
| 69 | S&F 20 mm dia ball valves, PTMT high pressure of epoxy coated Aluminium rod and high density plastic ball (200 gms) complete, screwed for iron pipes or brasas ferrule and fixed. |
| 70 | M&L for preparation of new plastered surfaces of walls and applying two coats of acrylic distemper including one coat of chalk whiting on plastered surface to prepara-tory to distempering complete all as specified and directed. |
| 71 | M&L two coats of cement base paint over a coat of primer on wall surface including preparation of surface. |
| 72 | M&l Painting two coats of synthetic enamel paint over a coat of red oxide primer to new steel Surfaces of any description, not otherwise described, over 10cm width or girth. |
| 73 | M & L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes as in Vertical column, trusses, purlins, rafters etc complete all as specified and as directed |
| 74 | M & L for rolled mild steel Plates (plain or chequered) channels, square cut or notched as in gusset Plate / Base plate (ordinary and counter sunk) forming holes, without any attachment of Fe 410-W (Gde-E- 250) quality-A etc complete all as specified and as directed |
| 75 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished flat surface etc complete all as specified and as directed |
| 76 | M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified & directed. |
| 77 | M&L Reinforced Cement Concrete, Nominal mix (1:2:4) type B-1 using 20mm graded stone aggregate as in foundation including rafts, fottings, foundation beams, plinth beam, base for columns etc basement slab under reamed piles and mass concrete etc complete all as specified and directed. |
| 78 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa, 150 AZ, as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all as specified and as directed |
| 79 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, 150 AZ as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all as specified and as directed |
| 80 | M&L for Pre-cast cement concrete (1:3:6) type C1 using 20 mm graded stone aggregates as in solid block masonry exceeding 10 cm in width and setting in cement mortar (1:6) complete all as specified and directed |
| 81 | M&L for rendering 10 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surface finsihed even and smooth without using extra cement etc complete all as specified and as directed |
| 82 | M&L for Preparation of new steel and iron surfaces of any description over 10 cm in width or girth not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed |
| 83 | M&L for preparing newly plastered wall surfaces and applying two coat of cement base paint over a coat of alkali resistant primer etc complete all as specified and as directed |
| 84 | M&L for Hard core with broken stone or boulder of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15 cm thick watering and rammed to a true surface etc all as specified and as directed |
| 85 | M&L for Plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregates as in 100 mm thick sub base to flooing etc complete all as specified and as directed |
| 86 | M&L for 150 mm thick cement concrete type B- 2, 1:2:4 (40mm graded stone aggregate) as hard standing etc complete all as specified and as directed |
| 87 | M&L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ for 150 mm thick complete |
| 88 | M&L for Plain cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregates as in copings, Chajja kerbs, roof padding/staging of water tank etc including necessary form work, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed |
| 89 | M&L for Reinforced cement concrete (M-25) Design Mix with using 20 mm graded stone aggregates as in Foundation, including rafts, footings, plinth beam etc complete all as specified and as directed |
| 90 | M&L for Reinforced cement concrete M-25 (desing mix) with using 20 mm graded stone aggregates as in slab supported on walls, beam and columns in floors, roofs landing balconies canopies etc complete all as specified and as directed |
| 91 | M&L for Reinforced cement concrete (M-25) Design Mix with using 20 mm graded stone aggregates as in beam, cantilevers, bressumers, lintels over 1.5 mtr span etc complete all as specified and as directed |
| 92 | M&L for providing reinforced cement concrete (M-25) design Mix with using 20 mm graded stone aggregates as in col, pillars, piers, posts and struts etc complete all as specified and as directed |
| 93 | M&L for Providing precast cement concrete, Type C1 1:3:6 (20 mm graded aggregate) solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar in CM 1:6, complete, in walls, complete etc complete all as specified and as directed |
| 94 | M&L for Cutting chases, pinning in Stone, concrete block or slab walls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth etc complete all as specified and as directed |
| 95 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical with Rough finished surfaces of concrete (Flat) etc complete all as specified and as directed |
| 96 | M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions with Rough finished surfaces of concrete (Flat) complete all as specified and as directed |
| 97 | M&L for Formwork to soffits and sides of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) with Rough finished surfaces of concrete (Flat) etc complete all as specified and as directed |
| 98 | M&L for formwork to sides and soffits of floor or roof beam, beam and haunching, girders, bressummers, lintels cantilevers, shelves including supports, overhangs etc also splays between floor and beam with rough finished etc complete all as specified and as directed |
| 99 | S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face etc with wood EPS complete all as specified and as directed |
| 100 | S & F for solid PVC frame (Single Rebated) of size 50X47mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete as sepecified and directed (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) |
| 101 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded as specified and directed by Engineer-in-Charge. NOTE (i) 4 mm thick sheet glass/figured glass and 0.36 mm dia stainless steel wire mesh be measured and paid separately. |
| 102 | S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed NOTE (i) 4 mm thick figured glass and 0.36 mm dia stainless steel wire mesh be measured and paid separately. |
| 103 | S&F 4mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and as directed |
| 104 | S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed |
| 105 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed |
| 106 | S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed |
| 107 | S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed |
| 108 | S&F for 100mm butt hinges, heavy weight, Stainless Steel of size 100 mm long and fixed complete as sepecified and directed |
| 109 | M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed |
| 110 | All as per item No. 109 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc complete all as specified and as directed |
| 111 | M&L for 75 mm thick cement concrete (1:4:8) type D-2 with using 40 mm graded stone aggregates) as in sub base of flooing etc complete all as specified and as directed |
| 112 | M & L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6 i complete all as specified and as directed |
| 113 | M&L Glazed ceramic coloured tiles 300X450X7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match incl backing coat 10 mm thick in CM 1:3 complete all as specified and as directed |
| 114 | M&L for rendering for ceiling 5 mm thick in CM 1:3 on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed |
| 115 | M&L for rendering 15 mm thick in CM (1:4) on other than fair faces of brick work or concrete surface mixed with water proofing compound as per manufacture instruction finished even and smooth without using extra cement etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately |
| 116 | Supply only Liquid water proofing compound |
| 117 | M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surface finished and smooth without using extra cement etc complete all as specified and as directed |
| 118 | M&L for preparing newly plastered surface of ceiling and applying three coat of white wash etc complete all as specified and as directed |
| 119 | M&L for Preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed |
| 120 | M & L preparation of newly plastered surface of wall and applying two coats of cement base paint over one coat of primer complete all as specified and as directed. |
| 121 | M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed |
| 122 | S&F 20 mm dia bore CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified |
| 123 | S&F rotational moulded PVC water storage tank 1000ltrs capacity conforming to IS-12701(1989) cylindrical vertical type double-layered with closed top including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc completg all as specified and as directed |
| 124 | S & F 25 mm dia of bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed. |
| 125 | S & F 25 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe etc complete all as specifieid and as directed |
| 126 | S&F bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed |
| 127 | S&F Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed |
| 128 | S&F stop valves /Angle Stop cock fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed |
| 129 | S & F PVC connection 15 mm size with PTMT nuts of length 450 mm, all as specified and as directed. |
| 130 | S&F Bevelled edge mirror of selected quality of size area exc 0.40 Sqm but ot exc 0.60 sqm mounted on 6 mm thick AC building board of or 6 mm thick with 40mm thick acryic beading etc complete all as specified and as directed |
| 131 | S&F vitreous china wash down water closet pan (pedestal pattern), white (including fixing bolts, but excluding flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc.. including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed |
| 132 | S&F PVC flushing cistern with flush out valve low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, etc complete all as specified and as directed |
| 133 | S&F Vitreous China wash basin, white, flat back/oval shaped size 550x440mm excluding ditto but including bracketsPVC waste pipe 610 mm long and PVC connection 450 mm long complete all as specified and as directed |
| 134 | S&F Viterous China urinals, bowl type (back or corner wall type), including providing and fixing plugs, beddings urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe 40 mm bore waste stainless steel coupling and LDPE pipe 600 mm long complete all as specified and as directed |
| 135 | M&L for Screed bed/rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surface mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately |
| 136 | S&F 75 PVC (SWR) Multi floor trap, plain with grating including jointing with solvent cement etc complete all as specified and as directed |
| 137 | S&F 110mm PVC (SWR) pipes, single socketed in any length with rubber ring joint laid in trenches or in floor complete all as specified and directed |
| 138 | All as per item no.137 above but 75mm bore pipe complete all as specified and directed |
| 139 | S&F 110mm PVC (SWR) pipes, single socketed in any length with rubber rings joint fixed with wall complete all as specified and directed |
| 140 | All as per item No. 139 above but 75 bore pipe complete all as specified and directed |
| 141 | S&F PVC (SWR) bends (any radius) of 110mm dia. |
| 142 | S&F PVC (SWR) bends (any radius) with access door of 110mm dia. |
| 143 | Filling under floors Spreading and levelling in well layers not exc 25 cm thick including watering as required etc complete all as specified and as directed |
| 144 | M&L for Hard core with broken stone or boulder of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15 cm thick water and rammed to a true surfac etc all as specified and as directed |
| 145 | M&L for 75 mm thick PCC 1:3:6, type C-1, using 20 mm graded aggregates as in plinth protection & and as in path etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade \\"A\\" complete all as specified and directed. |
| 146 | M&L for laying of DWCPE Sewage pipes line 150 mm Inner dia bore of pipe class SN-8 incl sealing of joints, fittings etc complete with collars complete all as specified and directed |
| 147 | M&L for Pre-cast cement concrete type 1:3:6 using (16 mm graded stone aggregate) with solid blocks exc 10 cm in width and setting in CM 1:6 all as specified and directed. |
| 148 | M&L for plain cement concrete 1:2:4, type B0 (using 12.50mm graded stone aggregate) as in channels and drains all as specified and directed. |
| 149 | M&L 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surface, surface finished even & smooth (without using extra cement) with using WPC @ 3% by weight of cement complete all specified and as directed. Note : WPC shall be measured and paid separately under respactive item. |
| 150 | M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed |
| 151 | M&L for forming fair finished drain or chanel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed. |
| 152 | M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed. |
| 153 | M&L for cement concrete 1:3:6, type C2 as in bed to 150mm bore drain pipes including packing under and hauching against the sides of pipe after they are laid and tested in trenches complete all as specified and directed. |
| 154 | M&L for Precast cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in landing, cover slab (for manholes etc) and similar work including necessary form work and set in C:M 1:6 complete all as specified and directed. |
| 155 | Point wiring complete with 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl non-metalic rigid PVC conduit medium grade ISI marked incl accessories incl GI/ MS branded sunken boxes of suitable module concealed on walls including modular frame and cover of suitable module fixed with cadmium plated iron screws for housing modular type switches, switch socket outlets, fan regulators etc., incl provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed for the following :-One light point controlled by one switch |
| 156 | All as per item No. 155 above but forOne fan/exhaust point controlled by one switch/regulator |
| 157 | All as per item No. 155 above but forOne 3 pin socket out let 5 A on same board |
| 158 | All as per item No. 155 above but forOne 3 pin socket out let 5 A on independent boardNote for Item No 157 :-(i) The earth wire for the points in the same circuit can be looped from point to point(ii) Earth wire shall be taken inside the conduit(iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring(iv) Cost of a circuit of any length of cable from DB to any switch/ socket board to be included in point wiring. |
| 159 | S&F LED batten suitable for indoor applications 20 Watts, 4 feet with extruded aluminium housing & integrated LED channel rectangular white arcylic cover complete with all accessories all as specified and directed. Make: Bajaj, Cat No.BCLAB 20 WH LED P or equivalent Makes & model. |
| 160 | Supply and fix Modular switch 1 way 6A,1 module |
| 161 | Supply and fix Modular Socket, 6A - 2/3 pin combined 2 module |
| 162 | S&F MCB SPN 240 volts 40 Amps complete all as specified and as directed |
| 163 | S&F MCB single pole 240 volts 6 to 32 Amps complete all as specified and as directed |
| 164 | S&F MCB DB SPN 4 way double door type 240 volts with 200 Amps rated busbar as specified and as directed. |
| 165 | S&F ceiling rose, surface bakelite type 65 x 50 mm, 2 to 3 terminals all as specified and as directed |
| 166 | M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles,check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion incl earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways incl funnel with watering pipe wire mesh and lugs, incl test point complete all as specified and as directed including dismantaling old unsv one . |
| 167 | S&F 30W LED bldg security light fitting with pressure die cast housing along with prismatic polycarbonate difuser with IP 66 protection. Make:- Bajaj, Cat No.:- ENXT P 30L WH SY PC SD or equivalent Makes in Philips/CG/Havells. |
| 168 | S&F Bracket made out of GI tubing medium grade 25 mm bore, approx length 1.5 m long including MS clamps made out of MS flat iron 25 x 6 mm, nuts, bolts, washers etc and including before fixing applying two coats of aluminum paint over a coat of red oxide primer complete all as specified and directed. |
| 169 | S&F Exhaust Fan, steel body AC single phase, 230V of size 200mm Sweep with, blade and frame and louver all as directed. Make : Bajaj/CG/Havells |
| 170 | M&L for sand cushioning with a layer of M-sand 23 cm thick under and above the cable complete all as specified and as directed |
| 171 | S&L sub class burnt bricks for cable protection complete as specified as directed |
| 172 | S&L XLPE insulated, screened, PVC bedded, galvanised steen strip or wire armouned power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 10 Sqmm, 2 core laid in trenches/wall.. |
| 173 | S&F GI tubing light grade 32 mm bore with all fitting laid in trenches/walls/Roads for cable protection . |
| 174 | S&F GI tubing medium grade 40 mm bore with all fitting laid in trenches/walls/Roads for cable protection. |
| 175 | S&F GI tubing medium grade 20 mm bore with all fitting laid in trenches/walls/Roads for cable protection. |
| 176 | S&F Gun metal Gate valve of size 20 mm dia with iron wheel. |
| 177 | S&F Float valve of size 20 mm dia with PVC body aluminium float rod, nylon float high pressure type (Make:- Prayag). Please Enable Macros to View BoQ information |
