|
| 1 | Demolition of cement concrete in ground floor & paving n. exc 15 cm thick (below or above GL) unreinforced, complete all as specified and directed. |
| 2 | Material and labour for PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation filling, mass concrete and sunken floor treatments, complete all as specified and directed. |
| 3 | Material and labour for water proofing treatment to sunken slab, walls, etc, and shall be carried out as specified below and as directed.(a) Clean the sunken portion of toilet / Baths/ WCs/ Kitchen thoroughly to remove laitance, dirt, dust etc.(b) Form angle fillet of size 40 mm x 40 mm along the junction of wall and floor using polymer modified mortar (“ Dr fixit” Pidicrete URP” or eqvt).(c) Sanitary pipes entering through walls and floor shall be sealed with “Dr Fixit Bath seal Tape” and the gaps to be grouted with non-shrink cementitous grout “Dr Fixit Bath seal Grout” or eqvt. Nahani traps etc to be fitted securely and the gaps around it to be grounted in the same manner.(d) Apply one coat of a Bitumen-modified polymer coating “Dr Fixit Bath seal Plus” or eqvt on all angle fillets by brush and cover it with 100mm open woven mesh when it is still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely. |
| 4 | Material and labour for rendering 10 mm thick in CM (1:4) on fair faces of brickwork or concrete surfaces, with using liquid water proofing compound @ 200 ml per 50 kg bag of cement or as per manufracture's instructions, finished even and smooth without using extra cement, complete all as specified and as directed.Note: WPC shall be measured and paid for seperately under relevant item. |
| 5 | Demolition & Cleaning the sunken floor surfaces by wire brushes, brooming, removing dust, complete all as specified and directed. |
| 6 | Material and labour for Cement concrete 1:5:10 type E-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including sub base of floors, complete all as specified and directed. |
| 7 | Material and labour for cement mortor 1:4, 10 mm thick plaster in wall or concrete surfaces, finished even and fair for sunken portion, complete all as specified and directed. |
| 8 | Applying three coat URP waterproofing chemicals for water proofing coating mix URP- cement in the ratio 1:1.5 by volume on new plastered surface as per manufature instruction for sunken portion. Make : Dr Fixit -301 or equivalent of Asian paint / Fosroc/ sika, complete all as specified and directed. |
| 9 | Supply only liquid water proofing compound, complete all as specified and directed. |
| 10 | Taking up or down steel tubing and connection including cleaning for refixing or removal to store for 15 mm bore, complete all as specified and directed. |
| 11 | Taking up or down steel tubing and connection including cleaning for refixing or removal to store for 20 mm bore, complete all as specified and directed. |
| 12 | Supply & fixing UPVC pipes out side dia 16 mm of pressure rating 10 Kgf/Sqcm, fixed to walls, ceilings or in floors etc, complete all as specified and directed. |
| 13 | Supply & fixing UPVC pipes out side dia 20 mm of pressure rating 10 Kgf/Sqcm, fixed to walls, ceilings or in floors etc, complete all as specified and directed. |
| 14 | S&F tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floor for 15 mm bore, complete all as specified and directed. |
| 15 | S&F tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floor for 20 mm bore, complete all as specified and directed. |
| 16 | Refixing old steel tubing and connection in new or old portion (walls ceiling, floors etc) for 15 mm bore, complete all as specified and directed. Note:- Serviceable pipe received from item No. 10 shall be reuse. |
| 17 | Refixing old steel tubing and connection in new or old portion (walls ceiling, floors etc) for 20 mm bore, complete all as specified and directed. Note:- Serviceable pipe received from item No. 11 shall be reuse. |
| 18 | Supply & fixing in repairs vitreous china white wash basin flat back size 550 x 400mm including coupling 32mm dia, waste pipe, and plug and porcelain stopper but including brackets & cutting for and pinning in end of brackets or erecting stand, complete all as specified and directed. |
| 19 | Supply & fixing in repair for pillar taps cost copper alloy fancy type with capstan head, chromium plated screwed down high pressure with or fly nuts screwed for 15 mm bore iron pipe and fixed, complete all as specified and directed. |
| 20 | Supply & fixing in repair Chromium plated brass angle/stop valve for 15mm bore pipe, fixed, complete all as specified and directed. |
| 21 | Supply & fixing in repair, two way angle valve cock chromium plated brass fancy type bore 15mm, complete all as specified and directed. |
| 22 | Supply & fixing in repairs plastic seat cover anglo indian type black/white of pattern WC including fixing divice and Chromium plated nuts, complete all as specified and directed. |
| 23 | Supply & fixing in repair vitreous china wash down water closet of Pedestal pattern white including seat cover making connection to trap and to flushing pipe etc complete and making good to floor, complete all as specified and directed. |
| 24 | S&F in repair vitreous china wash down water closet of \\"Orissa\\" pattern size 580 x 440 mm white with integral foot rests including connection to trap and to flushing pipe etc complete and making good to floor, complete all as specified and directed. |
| 25 | Supply & fixing in repairs bevelled edge 5.5 mm thick mirror of selected quality glass, 600 x 450 mm size, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 26 | Supply & fixing in repair sheet glass shelf assembly consinsting of 5.5 mm thick sheet glass shelf 12 CM wide with CP bracket guard and railing 60 cm long, complete all as specified and directed. |
| 27 | Supply & fixing in repair CP brass toilet paper holder, superior quality, complete all as specified and directed. |
| 28 | Supply & fixing in repair CP brass, soap dish, superior quality, complete all as specified and directed. |
| 29 | Supply & fixing CP Health foucet including PVC pipe 1.50m long with brass nuts for EWC, fixed in repairs, complete all as specified and directed. |
| 30 | Supply & fixing in repair PVC flushing cistern 10 ltr capacity with inlet ball valve float and handle and 32mm bore flush pipe including bracket, complete all as specified and directed. |
| 31 | Supply & fixing in repairs PVC connection 15mm dia and 45cm long with 2 Nos PTMT nuts, complete all as specified and directed. |
| 32 | Supply & fixing in repairs Waste pipe, complete all as specified and directed. |
| 33 | S&F in repair bib taps cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore, complete all as specified and directed. |
| 34 | S & F in repair Ball valves for 20 mm bore pipe high pressure of PTMT with epoxy coated Aluminium rod &highdensity plastic ball screwed for iron pipe and fixed, complete all as specified and directed. (Minimum weight 15mm-142gms/ 20mm- 210gms./ 25mm-455gms/ 40mm- 690 gms) |
| 35 | S & F in repair Ball valves for 25 mm bore pipe high pressure of PTMT with epoxy coated Aluminium rod &highdensity plastic ball screwed for iron pipe and fixed, complete all as specified and directed. (Minimum weight 15mm-142gms/ 20mm- 210gms/ 25mm-455gms/ 40mm- 690 gms) |
| 36 | S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union topipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm incl coupling, fixed, complete all as specified and directed. |
| 37 | S&Fin repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm incl coupling, complete all as specified and directed. |
| 38 | Taking down eaves gutters and rainwater pipes (any size orpattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed. |
| 39 | S&F for PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, 110mm bore, complete all as specified and directed. |
| 40 | S&F for PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, 75 mm bore, complete all as specified and directed. |
| 41 | S&F for PVC (SWR) bends any radius, 110 mm bore, complete all as specified and directed. |
| 42 | S&F for PVC (SWR) bends any radius, 75 mm bore, complete all as specified and directed. |
| 43 | S&F for PVC (SWR) branch piece, single (single Y) equal or unequal radius, 110 mm bore, complete all as specified and directed. |
| 44 | S&F for PVC (SWR) branch piece, single (single Y) equal or unequal radius, 75 mm bore, complete all as specified and directed. |
| 45 | S&F for PVC (SWR) branch piece, single (single T) equal or unequal radius, 110 mm bore, complete all as specified and directed. |
| 46 | S&F for PVC (SWR) branch piece, single (single T) equal or unequal radius, 75 mm bore, complete all as specified and directed. |
| 47 | S&F for PVC (SWR) reducers, 110 mm bore, complete all as specified and directed. |
| 48 | S&F for PVC (SWR) reducers, 75 mm bore, complete all as specified and directed. |
| 49 | S&F for PVC (SWR) vent cowl, 110 mm bore, complete all as specified and directed. |
| 50 | S&F for PVC (SWR) \\"P\\" trap, 110 mm bore, complete all as specified and directed. |
| 51 | S&F for PVC (SWR) \\"P\\" trap, 75 mm bore, complete all as specified and directed. |
| 52 | S&F for PVC (SWR) \\"Q\\" trap, 110 mm bore, complete all as specified and directed. |
| 53 | S&F for PVC (SWR) \\"Q\\" trap, 75 mm bore, complete all as specified and directed. |
| 54 | Dismantling water storage tank exc 250 & n’ exc 500 ltr capacity, complete all as specified and directed. |
| 55 | S & F for 300 ltr capacity white loft polyethene water storage tanks hoisted and fixed in position including tank nipple etc and 15mm dia ball valves of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, complete all as specified and directed. |
| 56 | S&F of in repair Gun metal gate valve 15 mm dia with iron wheel head screwed both ends for iron pipe and fixed in position, complete all as specified and directed. |
| 57 | Supply & fixing in repair gate valves(brass insert), for 20 mm bore pipe, complete all as specified and directed. |
| 58 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 59 | M&L for framed work rolled sections sections conforming to Gde Fe-290(Gde-165-E) as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates etc, fastening and making good dismentaled prtion in cement mortar (1:3) including oil bound distemper, complete all as specified and directed. |
| 60 | M&L for preparation of new untreated steel surface of any description exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 61 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles including removing debris out side MD land, complete all as specified and directed. |
| 62 | Material and Labour for Brick work with sub class 'B' brick straight or curved on plan exc 6 mtr mean raddius built in CM 1:6, complete all as specified and directed. |
| 63 | Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/ rubbish materials off the site out side MD land, complete all as specified and directed. |
| 64 | Material and labour for 15 mm thick plaster in CM 1:4 layer on fair faces of brick wall or concrete surfaces, finished even and fair, including use of scaffolding, complete all as specified and directed. |
| 65 | Material and labour for 10 mm thick Plaster in CM 1:6 single layer of on other than fair faces of concrete surfaces in wall (internal surface) and finished even and smooth without using extra cement, complete all as specified and directed. |
| 66 | Firstly old loose spelled concrete should be chiseled from roof ceiling with the help of scrapers chisel & hammer after that cleaning of rust from mild steel rod and applying cement spry 3.00 Kg per sqm by paint brush over cleaned surfaces and Material and Labour for 20-50 mm thick ready mix plaster in Multi layer for ceiling on fair faces of brick wall or concrete surfaces, finished even and fair incl taking down, complete all as specified and directed. |
| 67 | Providing and placing in position micro-concrete, grade M-30, which shall be cement based prepacked single component, chloride free, non-shrink, free flow, self compacting, ready to use after mixing water in specified proportion, obtained from Fosroc / SIKA / BASF/ Dr Fixit, thickness of section upto 75 mm complete including form works as required all as specified and as directed by the Engineer in charge (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument), complete all as specified and directed. |
| 68 | Material and Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004,Alkali & fungal resistance,dirt resistance exterior paint of required shape (Company Depot Tinted) with silicon additives @ 1.43 liter/10Sq m over and including priming coat of exterior primer applied @ 0.90 liter /10Sqm over new surface authorized applicator only including use of scaffoldings, complete all as specified and directed. |
| 69 | Material and Labour for preparation of newly plastered surface of wall and applying two coats of oil emulsion distemper over a coat alkali resistant primer coat through authorised applicators of paint manufacturers only of approved shade, complete all as specified and directed. |
| 70 | M&L for in repair galvanised MS Wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple incl fixed, complete all as specified and directed. |
| 71 | Hacking out old broken glass (any thickness, size quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads, complete all as specified and directed. |
| 72 | M&L for 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.5 sqm in each pane, complete all as specified and directed. |
| 73 | M&L for 3mm thick sheet glass Figured glass, pin head type and glazing with oil putty in square n. exc 0.5 sqm in each, complete all as specified and directed. |
| 74 | S&F for in repairs Stainless steel plate rack (utensil rack) of size (1100 mm x 900 mm) and depth 300 mm made with 0.63 mm thick stainless steel sheet provided with brass screw including necessary fittings, nut/bolts fixed, complete all as specified and directed. |
| 75 | M&L for PCC type B-1 1:2:4 (20 mm graded stone aggregate) for leveling course finishing even and rough to receive the tiles, complete all as specified and directed. |
| 76 | M&L and fixed in repair for Chequered cement concrete tiles with grey cement and no pigments 200 mm x 200 mm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors, complete all as specified and directed. |
| 77 | M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes cement mortar 1:6, complete all as specified and directed. |
| 78 | M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) in plinth laid in panel and joint fell with ashphaltic bitumen(measured separately) and sand, complete all as specified and directed. |
| 79 | M&L for Cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in floors, 40mm thick, laid in panels and finished even & smooth using extra cement, complete all as specified and directed. |
| 80 | M&L for Glass dividing strips, 3mm thick and 38mm wide, inserted in position in floors, complete all as specified and directed. |
| 81 | Dismantling, floor hearth or wall tiling inclduing cement mortar bedding and removing rubbish, complete all as specified and directed. |
| 82 | Material and Labour for first and premium quality of non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile excedding 0.06 sq.m but n. excedding 0.11 sqm in floors etc set and joimted in neat cement sluury and pointed in white or coloured cement to match and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed. |
| 83 | Material and Labour for first and premium quality of Glazed ceramic coloured tiles in vertical surface 350x 250x7 mm/450 x 350 x 7 mm thick, in skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4, complete all as specified and directed. |
| 84 | Material and Labour for Vetrified ceramic tiles Dark shade 7 to 8mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc and jointed in neat cement slurry and pointed in whitebor coloured cement and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed. |
| 85 | Material and Labour for Vetrified ceramic tiles Dark shade 7 to 8mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in vertical surfaces etc and jointed in neat cement slurry and pointed in whitebor coloured cement over and including 10 mm thick rendering or backing layer in cement mortar 1:4, complete all as specified and directed. |
| 86 | Material and Labour for heavy duty outdoor vitrified tiles dark or light shade /double charge /ultra charged 15 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed. |
| 87 | Demolition of Stone slab and tile of any description or thicknee in floors, apron etc, complete all as specified and directed. |
| 88 | Material and Labour for Granite stone best quality (of any type) tiles 20 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed. |
| 89 | Taking down chaukhat or frame area not exc 1.5 sqm each, complete all as specified and directed. |
| 90 | Taking down chaukhat or frame area exc 1.5 sqm not exc 4 sqm each, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 91 | Taking down chaukhat or frame area exc 1.5 sqm not exc 4 sqm each, complete all as specified and directed. Please Enable Macros to View BoQ information |
