|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE(I) Kanpur Name of Work : REPAIR, PAINTING AND POLISHING OF STEEL AND WOODEN FURNITURE OF COD KANPUR UNDER GE (I) KANPUR Contract No : GE(I)/KAN/T-123 OF 2025-26 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Items/Works Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Chair Dining (Drawing No FD-1105/279 for item Nos 1.00 to 7.00)(a) Removal of following existing unserviceable wooden components of various MES F/DB/FD/MAP/TP/SPL furniture items or similar items carefully without distrubing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, providing hinges, placing everypart in-tact the disturbed portion, as applicable as per drgs complete all as specified and directed.(b) Work will be executed where the furniture exist in different under units of GE (I) Kanpur Cantt including BSO's Furniture Yard as directed by EIC.(c) Timber Shall be 2nd class teak wood seasoned. CRCA section/CRCA sheet shall be used in repair/maint of steel furniture.(i) Rear leg |
| 3 | (ii) Front leg |
| 4 | (iii) Rear/front/side rail |
| 5 | (iv) Stiffener |
| 6 | (v) Back rest |
| 7 | (vi) S&F recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one complete all as specified and directed. |
| 8 | (vii) M&L for melamine polish with spray machine after removing of existing polish by scapping and smothening of surface wherever required or as directed by EIC to the following furniture articles all are of MES pattern viz F/DB/FD/MAP/spl type series or similar items incl applying wac for depressed surface as well as washing with caustic soda wherever required before polishng complete all as specified and shown on drg complete all as specified and directed. |
| 9 | Chair Easy (Drawing No FD-1108/229 for item Nos 8.00 to 13.00)(a) Removal of following existing unserviceable wooden components of various MES F/DB/FD/MAP/TP/SPL furniture items or similar items carefully without distrubing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, providing hinges, placing everypart in-tact the disturbed portion, as applicable as per drgs complete all as specified and directed.(b) Work will be executed where the furniture exist in different under units of GE (I) Kanpur Cantt including BSO's Furniture Yard as directed by EIC.(c) Timber Shall be 2nd class teak wood seasoned. CRCA section/CRCA sheet shall be used in repair/maint of steel furniture.(i) Rear leg |
| 10 | (ii) Front leg |
| 11 | (iii) Arms |
| 12 | (iv) Front/back/Side rail of seat as to match with the existing, made of shisham wood complete all as specified and directed. |
| 13 | (v) S&F recanning seat & back in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one complete all as specified and directed. |
| 14 | (vi) M&L for melamine polish with spray machine after removing of existing polish by scapping and smothening of surface wherever required or as directed by EIC to the following furniture articles all are of MES pattern viz F/DB/FD/MAP/spl type series or similar items incl applying wac for depressed surface as well as washing with caustic soda wherever required before polishng all as specified and shown on drg complete all as specified and directed. |
| 15 | Chair writing (Drawing No FD-202/ 250/280 for item Nos 14.00 to 21.00)S&F new components of 2nd class HW (shisham) including dismantling unservicable one complete all as specified and directed.(a) Rear leg |
| 16 | (b) Front leg |
| 17 | (c) Rear/front/Side rail |
| 18 | (d) Arms. |
| 19 | (e) Back rest |
| 20 | (f) Stiffener |
| 21 | (g) S&F recanning seat & back of the chair and recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one complete all as specified and directed. |
| 22 | (h) M&L for melamine polish with spray machine after removing of existing polish by scapping and smothening of surface wherever required or as directed by EIC to the following furniture articles all are of MES pattern viz F/DB/FD/MAP/spl type series or similar items incl applying wac for depressed surface as well as washing with caustic soda wherever required before polishng all as specified and shown on drg complete all as specified and directed. |
| 23 | Bed plywood top (Drawing No FD-245 & 246 for item Nos 22.00 to 30.00)S&F new components comprising of following outer member made of shisham wood and internal frame made of cheer wood, covered both sides of board with 3.5 mm thick OST plywood with 12mm thick half cut teak wood beading including dismantling unservicable one complete all as specified and directed.(a) Head board |
| 24 | (b) Foot board |
| 25 | (c) S&F new teak plywood of head board on both sides along with 30mm x 6mm teakwood beading on top including dismantling unserviceable one complete all as specified and directed. |
| 26 | (d) S&F new teak plywood of foot board on both sides along with 30mm x 6mm teakwood beading on top including dismantling unserviceable one complete all as specified and directed. |
| 27 | (e) S&F new components of 2nd class HW (shisham) including dismantling unservicable one complete all as specified and directed.(a) Long rail of size 90 x 35 mm |
| 28 | (f) Stiffner of size 60 x 40 mm |
| 29 | (g) Wooden bracket (corner) |
| 30 | (h) S&F top made of 12mm BWR phenol bonded commercial plywood with suitable screws including dismantling unservicable one complete all as specified and directed. |
| 31 | (j) preparation of the surfaces by throughly rubbing with emery paper both surfaces of the head board, foot board including legs and long rails and polishing with french polish two coats to obtain a glossy finish complete all as specified and directed. |
| 32 | Charpoy GI pipe (Drawing No FD-220 for item Nos 31.00 to 38.00)S&F following components of Charpoy GI pipe including dismantling unservicable one all as specified and directed.(a) Long rail made of 32 mm dia GI Tubing medium grade ISI mark 1.88 mtr long, threaded at both ends and fixing to 3 way 32 mm dia GI elbow of charpoy. |
| 33 | (b) 3 way 32 mm dia GI elbow ISI marked |
| 34 | (c) Check nuts of 32 mm dia |
| 35 | Conversion of 32 mm dia long rail obtained from item No 1 above into two numbers short rail after cutting and threading both ends and fixing to 3 way 32 mm dia existing elbow including dismantling existing one. |
| 36 | Conversion of 32 mm dia short rail obtained from item No 4 above into two numbers leg including fixing to 3 way 32 mm dia after one end threaded. |
| 37 | Removing old unserviceable/rusted MS Plate and S&F new MS Plate of size 900mmx40mm x 5mm duly painted with black colour after applying red oxide after making two Nos holes. |
| 38 | (a) M&L for removing old U/S plywood and S&F New 12 mm BWR phenol bonded commercial plywood of size 2020 mm x 900 mm including fixing of plywood with new 12 Nos Nut and bolts (75mmx6). 2mm teak wood eading complete reast all as per ply with applying with red colour. Necessary reassembling the components as where required to fixing components and tighten the charpoy frame to make original shape of charpoy as per drg before fixing the ply top complete all as specified and directed. |
| 39 | (b) M&L for painting two coat of synthetic enamel paint with silver shade of Charpoy Leg S&Frame as approved by EIC/GE. |
| 40 | Almirah Steel Med Steel/Almirah Med 1/2 H 1/2S (Drawing No FD 67/1032 for item Nos 39.00 to 45.00)S&F following components of Almirah steel med including dismantling unservicable one complete all as specified and directed.(a) Lock with duplicate keys (Make of Lock- LICO/RINA) |
| 41 | (b) Handle 100 mm size chromium plated |
| 42 | (c) 3 way locking device with necessary fittings and painted with two coats of synthetic enamel paint of olive green/smoke grey shade of approved quality over a coat of primer. |
| 43 | (d) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with two coats of synthetic emamel paint of olive green/smoke grey shade of approved quality over and including a coat of primer. |
| 44 | (e) Supply and fix door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of olive green/smoke grey/red or any shade as approved over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing.(Note for steel painting;- All steel surface shall be done with spray painting) (Make of Lock-LICO/RINA) |
| 45 | (f) Supply and fix shelves made of 1mm thick CRCA sheet welded/riveted and painted with two coats of synthetic emamel paint of olive green/smoke grey/any shade as approved over and including a coat of primer. |
| 46 | (g) M&L for painting two coat of synthetic Enamel paint with of Olive /Green/Smoke Gry shade as approved by Eng in Charge/GE over a coat of primer through spray machine both internally & externally to the following furniture articles. As per MES pattern viz F/FD/DB MAP Series or similar items including removing of dust, dirts, dents etc. applying putty to level the surface before primer/painting all specefied and shown on drgs complete all as specified and directed. |
| 47 | Locker Bed Side steel (Drawing No FD-1029 for item Nos 46.00 to 51.00)S&F following components of Locker steel including dismantling unservicable one complete all as specified and directed.(a) Handle 100 mm size chromium plated |
| 48 | Hasp & staple 100mm chromium plated complete all as specified and directed. |
| 49 | Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with two coats of synthetic emamel paint of olive green/smoke grey/ any shade of approved quality over and including a coat of primer. |
| 50 | Supply and fix new door shutters made of 1mm thick CRCA sheet including chromium plated handle 100mm size -01 No, chromium plated hasp & stapple of approved quality and painting with two coats of synthetic enamel paint of olive green/smoke grey/ any shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and as directed. |
| 51 | Supply and fix new curtain rod SS of size 20mm dia of 1.6mm wall thickness of locker steel complete all as specified and directed. |
| 52 | M&L for painting two coat of synthetic Enamel paint with of Olive /Green/Smoke shade as approved by Eng in Charge/GE over a coat of primer through spray machine both internally & externally to the following furniture articles. As per of MES pattern viz F/FD/DB MAP Series or similar items including removing of dust, dirts, dents etc. applying putty to level the surface before primer/painting all specefied and shown on drgs complete all as specified and directed. |
| 53 | REPAIR TO BED HARD STEEL (MAP) (Drawing No FD/E6/MAP/08(R) for item Nos 52.00 to 56.00)M&L for preparation of old steel surfaces by of Bed Hard steel scraping with emery paper, cleaning, redusting, making the surfaces smooth finishing and one coat of synthetic enamel paint of approved shade of approved make & quility on all steel surfaces inside and out side of Bed Hard steel complete all as specified and directed. |
| 54 | M&L removing of unserviceable ply top and supply & fixing 1980mm X 900mm X 12mm thick BWR plywood conforming to IS 303 of 1975 fixing with nuts & bolts complete all as specified and directed. |
| 55 | M&L removing of unserviceable head board frame of steel & fixing new full frame head board with legs made of steel as per drg andn and fixing new head board with made of 18/19 mm thick pre-laminated partical board with PVC edge beading and fixing with suitable size of screws complete all as specified and directed. |
| 56 | M&L removing of unserviceable foot board frame of steel & fixing new full frame foot board with legs of steel as per drg & fixing new foot board with made of 18/19 mm thick pre-laminated partical board with PVC edge beading and fixing with suitable size of screws complete all as specified and directed. |
| 57 | M&L for removing unserviceable/broken toe rubber shoes from Bed Hard steel and S&F new rubber shoes of approved make and quality, all as specified in drg complete all as specified and directed. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
