|
| 1 | Earrth work in cutting or In embankment Filling In ordinary soll, excavation to be in the form of regular pits not exceeding 1/2 metre (20\\") in depth and earthwork in embankment to be in 20 cm (8\\") layers, including ramming and dressing the surface to be required levels and slops and also including 1.5 metre (5 fts) lifts and 30 m. (100') lead. The earth from cutting to be used in making filling or to be disposlted as spoil banks within 30 metres (100 fts) distance as directed by engineer-in-charge. (Rate is Excluding Royality.) |
| 2 | Transportation of sub grade soilr from 5 km |
| 3 | WBM GRADE -3 Providing ,laying , spreading and compacting stone aggregates of specific sizes to water bound macadom specification including in unifrom thikness hand paking rolling with smooth Wheel roller 80-100 KN in stages to proper grade and camber , applying and brooming ,tone screening to fillup the interstics of the coarse aggregate, watering and compacting to achieve the desired density , Grade -3 as per Technical Specification Clause 405 . |
| 4 | Providing and laying 80 mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mmthick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. sqm 951.00 |
| 5 | Drain |
| 6 | Excavation in foundation in ordinary soil (loam caly, or sand). Including lift upto 1.5 mt. (5 ft.) and lead upto 30 mt. (100 fts.) and including filling waterning and raiming of excavated earth in the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and dispsal of surplus earth as directed by the engeeneer in-charge upto a distance of 30 mt. from the foundation and trenches. SI-257 |
| 7 | Concrete with 4 mm. (1.5\\") gauge Stone ballast fine local sand of 1.25 Fitness modulouse and cement in Proportion of 6:3:1 in foundation and under floors including supply of all materials labour and T&P etc. required for proper completion of the work. (6:3:1)SI No. 280 Page 39 |
| 8 | M-150 class brick work in 1:4 cement & coarse sand mortar in foundation up to plinyh as per S.No 303 +305,Ch-6 |
| 9 | Cement concrete with 20 mm (1.5\\") gauge approved stone ballast, approved coarse sand and cement in the proportion of 4 : 2 : 1including supply of all materials, labour and T&P etc. required for proper completion of the work.Ch-5 s.no. 288 new item page 40 Top |
| 10 | 12 mm thick plaster 1:4 cement and corase sand mortar including supply of all material labour T&P etc.as per ch-13 SI-17.59 |
| 11 | Add informatory board |
| 12 | Toilet Block |
| 13 | Excavation in foundations in ordinary soil (Loam clay or sand) including lift upto 1.5 m (5 fts.) and lead upto 50 mt.& including filling, watering and ramming of excavated earth . dsr 2.6.1 |
| 14 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.. 2.25(A) |
| 15 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. Dsr.2.27 |
| 16 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from naturalsources : 8 graded stone aggregate 40 mm nominal size.dsr 4.1.8 |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form work for : R.C.C. work in lintel band at G.F.dsr 5.9.5 |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form work for : R.C.C.work in slab at G.F.dsr 5.9.3 |
| 19 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). sunshade SLAB ,DSR 5.3 |
| 20 | RCC LINTEL BEND |
| 21 | M. S. work in R.C.C. up to two floor lvl.Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all completeDSR 5.22.1 |
| 22 | .Brick work with common burnt clay (non modular) bricks of class designation 150 in foundation and plinth in:Cement mortar 1:6 (1 cement : 4 coarse sand) 6.1.1 |
| 23 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) DSR 4.10 |
| 24 | Brick work with common burnt clay (non modular) bricks of class designation 150 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 6 coarse sand) 6.4.1 |
| 25 | Z-Section steel window |
| 26 | Angle iron chaukhats |
| 27 | 12 mm cement plaster of mix 1:6 (1 cement: 6 coarse sand) DSR 13.4.2 (OUTER) |
| 28 | 15 mm cement plaster of mix 1:6 (1 cement: 6 coarse sand) DSR 13.5.2.(INNER) |
| 29 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 11.3.1 40 mm thick with 20 mm nominal size stone aggregate, DSR 11.3 |
| 30 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete , DSR 8.31 |
| 31 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. DSR 11.37 |
| 32 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 6 graded stone aggregate 20 mm nominal size (Recycled Aggregate (RA) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smoothdsr 4.17B |
| 33 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.DSR 13.80 |
| 34 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). (DSR-13.47.1) |
| 35 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :4.0 mm thick glass panes. DSR 10.30.1 |
| 36 | SANITARY FIXTURES & ACCESSORIES |
| 37 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required Orissa Pattern W.C. pan of size 580x 440m with integral type foot rests flush pipe and over flow arrangement.DSR17.1.1 |
| 38 | Same as above but for European type W.C. pan with black plastic seat and lid. Make- Cera,Hindustan.DSR17.2.2 |
| 39 | Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standard pattern including Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tapDSR.17.7.4 |
| 40 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete 32mm dia DSR17.28.1 |
| 41 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete 40mm dia DSR17.28.2 |
| 42 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS :2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and brackets, cutting and making good the walls and floors wherever required Single half stall urinal with 5 litre P.V.C. automatic flushing cistern DSR17.5.1 |
| 43 | Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers.DSR17.31 |
| 44 | Providing & fixing PTMT towl rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm. long towl rail length of 645 mm. width 78 mm. and effective height of 88 mm, weighing not less than 190 gms. DSR17.73.2 |
| 45 | Providing and fixing PTMT Liquid soap container 109 mm wide ,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms. DSR17.71 |
| 46 | Providing and Fixing C.P. brass Ablution health faucet assembly with 1.2 m long braided PVC hose with mounting bracket fixed on wall complete.[FOR EWC] |
| 47 | Providing and layingof SW pipe including bed concrete as per standard design.100 mm dia,DSR 19.3.1 |
| 48 | WATER SUPPLY PIPES AND FITTINGS |
| 49 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.(internal work)Exposed on wall 25mm dia nominal outer dia pipes,DSR18.7.3 |
| 50 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. 16mm dia nominal outer dia pipes DSR18.11.1 |
| 51 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. 20mm dia nominal outer dia pipes DSR18.11.2 |
| 52 | Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions. 15mm nominal bore DSR18.21.2 |
| 53 | Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 15mm nominal boreDSR18.49.1 |
| 54 | Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore DSR18.51 |
| 55 | Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 893115mm nominal bore DSR18.53 |
| 56 | Providing and fixing ball valve (brass) of approved quality complete. (High or low pressure with plastic floats). 25mm. Nominal bore DSR18.18.3 |
| 57 | Providing and fixing brass stop cock of approved quality. 15 mm nominal bore DSR18.16.1 |
| 58 | Providing and fixing brass stop cock of approved quality. 20 mm nominal bore DSR18.16.2 |
| 59 | Providing and fixing gun metal gate valve with wheel of approved quality.25mm dia nominal bore DSR18.17.1 |
| 60 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 61 | ELECTRICAL FITTING |
| 62 | SEPTIC TANK & SOAK PIT |
| 63 | EARTH WORK IN EXCAVATION IN FOUNDATION DSR 2.6.1 |
| 64 | PROVIDING AND LAYING OF CEMENT CONCRETE IN FOUNDATION (1 :4 :8) dsr4.1.8 |
| 65 | Brick work with common burnt clay (non modular) bricks of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) dsr 6.4.1 |
| 66 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).bands dsr 5.3 |
| 67 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete dsr 5.22 |
| 68 | 12 mm cement plaster of mix 1:6 (1 cement: 6 coarse sand)DSR 13.4.2 |
| 69 | Providing and fixing C.I. tee at the inlet and outlet of septic tank. DSR7087 |
| 70 | Providing & fixing 75mm dia vent pipes.DSR-17.35.2.1 |
| 71 | Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.DSR-17.56.2.1 |
| 72 | PRECAST MANHOLE COVER Please Enable Macros to View BoQ information |
