|
| 1 | Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts. |
| 2 | Providing, laying, jointing and testing & commissioning of 'C' class heavy duty MS pipe confiroming to IS 3589/IS:1239 PART-1 (2004) including welding fitting like elbows,tees, flanges & thickness 20 mm, tapers,nuts bolts,gaskets, anti vibraton pads, springs, or liners of resilient, and fixing the pipe on the wall /ceiling with 2 to 3 meter distance of each split pipe support clamps with rubber of building standard reputed make and also extra supports shall be provided at the bends. frame making opening in the walls/floors/slabs or modification in the exiting opening wherever provided for carrying pipe line and before painting two coats of primer and the two more coats of synthentic enamel paint of required shade complete in all respect as required . including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts.MAKE:-TATA/JINDAL/ SAIL/ ZENITH BIRLA as approved by Engineer -in-charge. |
| 3 | 25 mm |
| 4 | 32 mm |
| 5 | 40 mm |
| 6 | 50 mm |
| 7 | 65 mm |
| 8 | 80 mm |
| 9 | 100mm |
| 10 | 150mm (wall thickness 6.3 mm) |
| 11 | Proviidng ,Installing and commissioning of Frist Aid hose reel with MS Construstion spray painted in post office red Conforming to IS 884 complete following as required. 20 mm nominal internal dia water hose thermoplastic ( Textile reinforced ) type-2 as per IS: 12585 30 mtr long and 20 mm nominal internal dia PVC Hose and PVC Nozzle (Assy).Hub width approx 230 mm, Maximum operating pressure 10 bar, Flow rate 22.5 lpm at 7 bar pressure Drum and brackets for fixing the equipments on wall. Connection from riser with 25 mm dia stop .heavy duty water hose thermoplastic (Teitile reinforced )type II, 20 mm dia globe valve complete as required. including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts.Make:MINIMAX/CEASEFIRE/OMEX/SAFEX/ |
| 12 | Supply, installation, testing & commissioning of single headed Stainless steel ISI marked odlique pattern internal/External hydrant landing valve with 80 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with Stainless steel and G.I. chain, twist release type plug and all accessories as per IS: 5290-1983 (Type'A'), including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts.Make:MINIMAX/CEASEFIRE/ OMEX/SAFEX/ |
| 13 | Providing, fixing of 63 mm dia,15 mtr long non-percolating flexible hose (RRL- type A) as per IS : 636, Type A with Stainless steel male & female instantaneous type coupling(IS 903), including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts.Make:MINIMAX/CEASEFIRE/OMEX/SAFEX |
| 14 | Providing & fixing 63 mm dia Branch pipe with Stainless steel with 20 mm (nominal internal dia) Size stainless steel Nozzle with standard inlet instandenous lack type 63 mm dia Coupling Branch Pipe & Nozzle shalll Confirm I.S 903. including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts. |
| 15 | Providing &fixing fibre glass reinforced Fire Hose Cabinet ( 30\\"x24\\"x10\\") out door type, made out of sheet having glazed door with 6mm thick clear Glass including necessary Locking arrangement with allen Key, powder coating with Post Office Red Paint and for Hosing 2 Nos .RRL Hose Pipe, 1 No Branch pipe including grounding and suitable inscripting the words\\" Hose Cabinet\\" on the Box complete in all respect as requried. including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts. Make:MINIMAX/CEASEFIRE/OMEX/SAFEX |
| 16 | Providing Gunmetal Collecting head with 63 mm dia instantaneous type inlet +150 mm dia flanged outlet with built incheck valve for fire brigade connection to UG Tank +wet riser I.S 904 specification test for 21kg/mm2 including necessary support complete in all respect, including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts. Make:MINIMAX/CEASEFIRE/ OMEX/ SAFEX |
| 17 | Four way |
| 18 | Supplying, installation, testing and commissioning of single suction collecting head with cast iron body, nose coupling (draw out connection) with female outlet complete bolts, nuts and rubber insertions complete inm all respect as required), including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts.Make:MINIMAX/CEASEFIRE/OMEX/SAFEX/ |
| 19 | Draw out connection |
| 20 | Providing Cast iron /steel Butterfly Valve Confirming to type P.N 1.6 of I.S 13095-1991 Complete with Flanges bolt ,nuts ,gasket etc. As per table 'E' specification complete in all respect hydraulically test to 20 K./sqcm, including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts.SANT/ZOLOTO/LEADER/ KIRLOSKAR/ |
| 21 | 80 mm Dia |
| 22 | 100 mm Dia |
| 23 | 150 mm Dia |
| 24 | Providing and fixing Cast Cast Iron/steel double flanged horizontal type with gunmetal seat non-return valve confirming to class - I of IS : 5312 including nuts, bolts, 1.5 mm thick compressed asbestos gasket as per table \\"E\\" and specifications complete in all respect, including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts.make SANT/ZOLOTO/LEADER/ KIRLOSKAR/KARTAR |
| 25 | 80 mm Dia |
| 26 | 100 mm Dia |
| 27 | 150 mm Dia |
| 28 | Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange complete in all respect, including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts.make SANT/ZOLOTO/LEADER/ KIRLOSKAR |
| 29 | 100 mm Dia |
| 30 | 150 mm Dia |
| 31 | supply, Installing, testing and commissioning of 25mm dia gate valve with all accessories as requried, including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts make .SANT/ZOLOTO/LEADER/ KIRLOSKAR/KARTAR |
| 32 | supply, Installing, testing and commissioning of 100mm dial type pressure gauge gate valve with all accessories as requried, including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts.make .SANT/ZOLOTO/LEADER/ KIRLOSKAR/KARTAR |
| 33 | SITC Pressure switchs for Main, Jockey, and staind by Diesel pumps,terrace pump including necessary wiring up to control panel and Ballvalve. complete in all respect, including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts.MAKE DANFOSS/INDFOS/DELTA CONTROL |
| 34 | Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :conforming to relevant IS ammended upto date complete etc, including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts.Make. Minimax/Ceasefire/SAFEX/OMEX/ TYCO. |
| 35 | Pendent sprinkler |
| 36 | UPRIGHT sprinkler |
| 37 | Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required, including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts. |
| 38 | Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required, including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts.Make:-Minimax/Ceasefire/SAFEX/ OMEX/ |
| 39 | Length upto 1000 mm |
| 40 | Providing and fixing following size Cast iron /steel Foot Valve Confirming to type P.N 1.6 of I.S 13095-1991 Complete with Flanges bolt ,nuts ,gasket etc. As per table 'E' specification complete in all respect hydraulically test to 20 K./sqcm. including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts.make .SANT/ZOLOTO/LEADER/ KIRLOSKAR/KARTAR |
| 41 | 100 mm Dia |
| 42 | 150 mm Dia |
| 43 | Supply, Installation, Testing and Commissioning of electrical driven pump (meant for hydrants& sprinklers) suitable for automatic operations consisting of the following conforming to specifications attached. (A) Horizontal mounting, End Suction type single stage centrifugal pump with cast iron body and bronze impeller with steel shaft of C-40 grade, capable of discharging 1620 litres / minute of water at 56 metres head to give a pressure of not less than 3.5 Kg/Sq cm at topmost Hydrant point. (Confirming to IS-1520) |
| 44 | (B)suitable HP Capacity Two pole totally enclosed fan cooled type squirrel cage A.C. induction motor coupled with flexible coupling for the above pump suitable for 3 phase, 415 V +/-10%, 50 Hz +/- 5% A.C. supply, with IP 55 protection for enclosure, horizontal mounted type with 'F' class insulation (Confirming to IS-325) |
| 45 | (C) Common bed plate for mounting pump and Moter fabricated of Moter fabricated of suitable of MS, channel as per manufactures recommendation. |
| 46 | (D) Suitable RCC pump-Foundations as per manufactures design and 4 nos Dunlop (cushy foot) heavy duty Antivibration mounting pads ,including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts.Make:KIRLOSKAR/ ABB/ SIEMENS |
| 47 | Supplying, installation, testing and commissioning of diesel engine driven main fire pump conforming to IS 12469: 2019 suitable for automatic operation and consisting of following,complete in all respects, as required : (Diesel Driven Pump)(b) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal as required.(c) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank,exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications,painted with post office red colour etc. as required. (d) M.S fabricated, common base plate, coupling,coupling guard, foundation bolts etc. as required. (e) Suitable cement concrete foundation duly plastered and with anti vibration pads.Make:KIRLOSKAR/ ABB/ SIEMENS |
| 48 | Jockey Pump (Wet Riser System)Supply, Installation, Testing and Commissioning of electrical driven jockey pump (meant for hydrants) suitable for automatic operations, consisting of the following, conforming to specifications attached.(A) squirrel cage induction mptor suitable for 3 phase ,415 volts suitable hp Horizontal mounting, End Suction type centrifugal pump with cast iron body and bronze impeller with steel shaft of C-40 grade, capable of discharging 180 litres/minute of water at 56 metres head to give a pressure of not less than 3.5 Kg/Sq cm at topmost Hydrant point. (Confirming to IS-1520) including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts. (Make:Make:KIRLOSKAR/ ABB/ SIEMENS |
| 49 | Fabrication, supplying, Installation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories,mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required : |
| 50 | INCOMING250A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Digital Ammeter (0-250 A) with selector swtich & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 300AOUTGOING( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LEDtype ON, OFF, trip indicating lamps) Main Fire Pump 125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. Jockey Pump63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overloadprotection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation,selector switch for local/remote, auto/manual/OFF operation. |
| 51 | Diesel Engine ControlControl for diesel engine comprising - Automatic/Manual selctor switch & 3 attemptsstarting device, timers and relays as required, push buttons, start/stop in manual modeIndicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter,and 0-20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System ControllerDesigning, Supply, Installation, Testing andcommissioning of system controller to controloperation of main electric fire pump, diesel pump,Pressurization pump, Terrace pump in sequence asper specification consisting of relays, timers.Sensors, annunciation window for fault indication,complete as per specification |
| 52 | Providing and fixingProviding & fixing of IS marked (IS:15683) portable fire extinguisher, 4.5 kg carbondioxide type flat base including valve, discharge hose of not less than 10 mm dia. 1 M long & complete in all respects including initial fill with CO2 gas confirming to IS:15222 filled to a filling ratio of not more than 0.667 and wall suspension bracket, including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts.Make:-Minimax/Ceasefire/ SAFEX/OMEX |
| 53 | Providing and fixing 4 kg. ABC MAP-50% Powder type fire extinguishers are manufactured and marked to Indian standard IS: 15683. Hose shall made of EPDM Rubber, CE Marked Valve, Suitable first aid appliance for fighting fires in Class A, B & C fire that is wood, textile, flammable liquids & gases, including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts.Make:-Minimax/Ceasefire/SAFEX/OMEX |
| 54 | Providing and fixing Water CO2 9 .Litrs type fire extinguishers consisting of seamless cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS: 15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. ( ISI MARK) .Make:-Minimax/Ceasefire/ SAFEX/ OMEX |
| 55 | Providing & Fixing 45 Kg. Foam Type fire extinguishers are manufactured and marked to Indian standard IS: 15683. Hose shall made of EPDM Rubber, CE Marked Valve, Suitable first aid appliance for fighting fires in Class A, B & C fire that is wood, textile, flammable liquids & gases.Make:-Minimax/Ceasefire/SAFEX/OMEX |
| 56 | Providing & Fixing 9Kg. Foam Foam Type fire extinguishers are manufactured and marked to Indian standard IS: 15683. Hose shall made of EPDM Rubber, CE Marked Valve, Suitable first aid appliance for fighting fires in Class A, B & C fire that is wood, textile, flammable liquids & gases.Make:-Minimax/Ceasefire/SAFEX/OMEX |
| 57 | Providing & fixing of IS marked (IS:15683) portable fire extinguisher, 22.5 kg carbondioxide type flat base including valve, discharge hose of not less than 10 mm dia. 1 M long with trolly complete in all respects including initial fill with CO2 gas confirming to IS:15222 filled to a filling ratio of not more than 0.667 and wall suspension bracket. (ISI MARK) Make:-Minimax/Ceasefire/SAFEX/OMEX |
| 58 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 59 | Providing and fixing 6 SWG G.I wire on surface or in recess for loop earthing including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts. |
| 60 | Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheatthed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc.of the required size. including lugs, gland any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts.MAKE :-KEI/FINOLEX/HEVELLS |
| 61 | Armoured cable 25 sq. mm ( 3.5 core) |
| 62 | Armoured cable 50 sq. mm ( 3.5 core) |
| 63 | Supplying and laying control wiring with multicore copper stranded conductor of following sizes PVC insulated, PVC sheathed armoured cable between various sensors and system controller/starter etc.in pump house & out side on surface/existing cable tray complete with connections at both end with glands etc.as required. MAKE :-KEI/FINOLEX/HEVELLS |
| 64 | 3 x 2.5 sq.mm |
| 65 | Supply &n laying of 4mm thick anti corrosive pipe protection Bitumeminous tape.It should be complete as per specifications & directions of Engineer-in-charge. including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts. |
| 66 | Supply and fixing in position 1 m wide Insulation mat made of elastomeric polymers Material (Class -A) of 415V grade as per IS 15642-2006 . Thickness of insulation mat shall be not less than 2 mm to withstand 1.1 KV dielectric strength AS PER IS 15652 : 2006. It should be complete as per specifications & directions of Engineer-in-charge. including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts. |
| 67 | Provding and refilling of diesel for 500 KVA & 250 KVA complete in all respect . |
| 68 | Annual Maintenance service inclusive of all minor consumable spares like gasket,nut bolts thimbles etc required and one visit a month and emergency visit during warranty period and after to check the whole system and maintain in running condition by fire authurised person. Add for comperehensive maintenace for next consecutive year excluding the equipment with free warrantee pariod of one year (For Second year) |
| 69 | AMC For Third Year |
| 70 | AMC For Fourth Year |
| 71 | AMC For Fifth Year Please Enable Macros to View BoQ information |
