|
| 1 | Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by applying tack coat @ 5 kg per 10 Sqm using bitumen grade VG-10, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sqm using bitumen grade VG-10, binded with 0.09 cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings) complete all as specified and directed by Engineer in charge. |
| 2 | Material & labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a tack coat with bituminous primer @ 5 kg per 10 sq metre (using bitumen grade VG-10) over black bituminous surfaces complete. |
| 3 | Material & labour for applying evenly a tack coat with bituminous primer @ 5 kg per 10 sq metre (using bitumen grade VG-10) over black bituminous surfaces complete. |
| 4 | Material & labour for bituminus premix semi dense asphaltic concrete (SDAC) 40mm thick consolidated thickness with 5.5% binder content VG-10 by weight of total mix from hot mix plant, rolled and compacted to required camber and gradient using mechanical self propelled paver and rolled with pnuematic vibratory power roller 8 to 12 tones capacity, complete all as specified and directed. Note: (i) Bituminous premix SADC will be laid by using hot mix plant and mechanical paver only.(ii) Work shall be executed as per design mix as approved by GE.(iii) The binder content specified is minimum. Financial effect of any plus variation in binder content during design mix at site shall be borne by contractor without any extra cost to the government. |
| 5 | Supply and fix in repair solar cat eye aluminum alloy (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufacturer's instructions etc. all as specified and directed.Make:- Cat Eye/ Dark Eye/ Protek/ Automat |
| 6 | Supply & fix in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (size 150x150x300mm) type B1 complete all as specified and directedMake-Cat Eye/ Dark Eye/ Protek/ Automat |
| 7 | Supply & Fixing plastic speed breaker made of high density poly ethylene (HDPE) plastic materials size 500 x 370 x 50mm including fixing metallic bolts are used per pc for installation on road the top surface of the speed breaker should be flat in order to support the vehicles from jerking or skidding and surfaces dressings for even and levelled surface as in repairs including taking down exisiting one of all specified and directed by Engineer in Charge. Make-Cat Eye/ Dark Eye/ Protek/ Automat |
| 8 | Supply & Fixing in repair road ultra mind convex mirror circular of size 800mm made with ABS body Lens/Mirror with unbrakable polycarbonarate fixed with clamp with 50mm dia MS pole 5 feet long and all as specified and directed Model OS-790. Make- Oscar/ Dark Eye or equivalent approved as approvad by GE. |
| 9 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed. Make-Cat Eye/ Dark Eye/ Protek/ Automat. |
| 10 | Material & labour for preparing bituminous surfaces of road and marking 2.5 mm thick centre lines, stop lines, dashes, arrows etc and the like not exc 15cm wide on road pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturer's instruction complete all as specified and directed Please Enable Macros to View BoQ information |
