|
| 1 | Excavation in foundation in ordinary soil, foam, clay or sand including lift upto 1.5 m & lead upto 30m Including filling watering & ramming of excavated earth into the trenches or into the space between the building & the sides of foundation trenches or in to the plinth removal & disposal of surplus earth as directed by the engineer in charge upto a distance of 30m from the foundation SR 251 |
| 2 | Cement concrete with 4 cm. (1%½\\") gauge approved stone, ballast, approved coarse sand and cement in the proportion of 4:2:1 including supply of all materials, labour and T&P etc. required for proper completion of the work.with 2cm. Gauge grit.SR 2791 |
| 3 | First class brick work In 1:4 cement and coarse sand mortar In foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. SR 305 |
| 4 | Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie roads, gratings etc. (when not Included in an over all rates) wrought to required form, including of supply of steel, bolts, nuts and wastage etc. and its fixing required for proper completion of work. angle iron 50*50*6 mm SR 502 B |
| 5 | Providing and foxing G.1. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete Made of G.I wire of dia 4 mm as per the direction of Engineer-in-charge DSR 16.70.1 |
| 6 | Providing barbed iron wire fencing including fixing it to post after stretching it, inciduing labour and T&P etc. required for proper completion of the work, but excluding supply of posts and barbed wire but including cost of clips. DSR 16.18.1 |
| 7 | Apply priming coat over new steel and other metal surface after and including preparing the surface throughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes,fine steel /wood scrappers sand papering and knotting including cost of all materials, labour abd T&P etc required for proper completion of the work. SR 1 |
| 8 | Painting first coat over priming coat(but excluding cost of priming coat) on wood or steel and other metal surface with superior synthetic enamel standard make brushing to give an even shade and finish and including cleaning the surface of all dirt dust and other foreign matter sand papering and stripping including cost of all materials labour, T&P etc required for the proper SR 2 |
| 9 | BORING WITH SOLAR PUMP Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipment's, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge. upto 90 metre depth below ground level 300 mm dia DSR 23.1.1.1 |
| 10 | Boring/drilling bore well of required dia for casing/ strainer pipe by suitable method prescribed in IS. 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, beyond 90 metre & upto 150 metre depth below ground level 300 mm dia DSR 23.2.1.1 |
| 11 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS 12818, including required hire and labour charges, fittings & accessones etc. all complete, for all depths as per direction of Engineer-in-charge. 100 mm dia DSR 23.3.1 |
| 12 | Supplying assembling, lowering and foxing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge 100 mm dia DSR 23.4.1 |
| 13 | Providing and fixing MS clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part 1), including necessary bolts & nuts of required size complete 100mm dia DSR 23.14.1 |
| 14 | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS 2800 (part 1) 100 mm dia |
| 15 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of. DSR 23.13.1 |
| 16 | Providing & fixing of 3 HP BLDC Solar Submersible Pump with complete system including controller, BLDC/PMSM motor, SS304 pump having 30 meter head, with all necessary accessories and fittings complete in all respects.The item includes:.Solar Pump Set (3 HP) – Make: Crompton Greaves Consumer Electricals.Solar Modules: 540 Watt × 6 = 3240 Watt – Make: Usha International.Ground Mounted Structure (G.I.).DC Wire 4 Sq.mm – Make: Finolex/Polycab.Submersible Cable 2.5 Sq.mm – Make: Finolex/Polycab/KEIController Unit with complete protectionAll fittings, clamps, nut-bolts, foundation work etc.Complete in all respects as per site requirement and direction of Engineer-in-charge. Rate as per approved bond no 1536 dt 22-07-2025 Please Enable Macros to View BoQ information |
