|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / heavy class PVC conduit having wall thickness minimum 2 mm, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Make:-Anchor roma classic/L&T Entice /Legrand Myrius . |
| 2 | Group C |
| 3 | Supply and fixing of Recess led downlighter in 18 W (+/- 5%)watts in Round Shape with minimum system lumen efficacy of 100 lm/W and total luminous flux 1500 with Pressure Die cast Aluminium heat sink with and HET diffuser and polycarbonate mounting box P.F.>0.90 ,ATHD<15% ,CCT 6500K/4000K, CRI > 80,IP20 protection.The LED with Useful life of 50000 Hrs at L70.. The Input voltage range shall be 220V to 240V .Fixture have Surge Protection 4 kV and inbuilt short circuit protection .Isolated Driver including ,cutting arrangement ,complete in all respect. Make Philips/Wipro/jaquar or as approved by Engineer-in-Charge.(five year warranty) |
| 4 | Providing, Installation, testing and commissioning of ceiling fan,including wiring the down rods of standard length (up to 45 cm) with 16/0.20 mmtwin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required. (Make: Usha Technix BLDC ISI, Orient Echotech Prime, Havells Efficiencia, Bajaj Energos 26, Anchor Ecobreez Urban 3 Blades, Crompton Energion HS Groove Hyperjet only) .five year warranty |
| 5 | Ceiling Fan 1200 mm sweep |
| 6 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 7 | Fan regulator |
| 8 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.Make:-Finolex/Anchor/Polycab/Plaza as approved by Er-in-charge. |
| 9 | 3 x 1.5 sq. mm |
| 10 | Supplying and fixing of MCCB Four pole following rating and breaking capacity with thermal magnet in release complete with connection ,testing and commissioning etc as required.Make:- L&T /Legrand/Hager ,/ Schneider as approved by Engineer-in -charge. |
| 11 | 63 amp ,18KA. |
| 12 | Supplying and fixing copper strip bus-bars suitable for 100 Amp. 415 volts capacity 4 No. each of cross-sectional area (25.4x3.17mm),in the existing enclosure with all accessories including connections etc. as required:-: |
| 13 | Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation made from (50 mm x 50 mm x 6 mm thick) M.S. angle iron frame, covered with 1.6 mm thick M.S. sheet duly welded on five sides & front side hinged, complete with locking arrangement with sufficient No. vertical and horizontal intermediate switchgear supporting members each of M.S. flat 50mmx6mm thick of suitable length duly welded. The cubical pedestal shall have cable entry box at one or two sides and 4 No. legs of 50mmx50mmx6mm thick M.S. angle iron each 60 cm long including, powder coated painting and bonding to the existing earth etc., the same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:-The panel should be approved /Tested from the CPRI lab.& should confirmed to ISI: 64139 I) i) 300 mm Deep |
| 14 | Cubical panel Overall Size(H) 1000MM X (W) 1000 MM X(D) 300 MM |
| 15 | Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required. |
| 16 | Armoured cable 16 sq. mm (4 core) |
| 17 | Providing, laying and fixing of PVC round sheathed 4 core 2.5 sqmm FRLS copper conductor flexible cable for voltage grade up to 1100 volt , as required complete in all respect. Make :-Finolex/Havell/Polycab/KEI or it equivalent. Make :-Plaza/Havell/Polycab/KEI or it equivalent. |
| 18 | Supplying and fixing of following sizes of Heavy class FRLS PVC Conduit along with accessories in surface/recess including cutting the wall and making good as required. MAKE:-Diplast/BEC/ Polyfit/AKG as approved by Er-In-Charge |
| 19 | 32 mm |
| 20 | MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator.Make:- L&T /Legrand/Hager ,/ Schneider as approved by Engineer-in -charge. |
| 21 | MCB DB 4 way |
| 22 | MCB DB 12 way |
| 23 | Supplying and fixing , 240/415 volts, 10 kA, “C” curve,miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.) Make:- L&T /Legrand/Hager ,/ Schneider as approved by Engineer-in -charge. five year warranty) |
| 24 | Single pole 5-32 amp |
| 25 | Supplying and fixing 32 amps rating, 240/415 volts, 10 kA, “C” curve,miniature circuit breaker suitable for inductive load of four poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Make:- L&T /Legrand/Hager ,/ Schneider as approved by Engineer-in -charge. |
| 26 | Supplying and fixing 12W ± 10% Watt all in one integrated Solar LED light with Monocrystalline Solar PV Module panel minimum 75 Wp CRI > 70 & PIR sensor for motion detection on the wall with necessary brackets and mounting arrangement Including five years warranty as required with following specs. Panasonic/Wipro/Phillips/ Transrail/ LT/ HPL/ Surya/ OSRAM/ Havells/ Bajaj/ Twinkle only to the best satisfiation of Engineer in Charge of following specifications:- |
| 27 | Solar LED street light specifications: |
| 28 | System Wattage (Input) 12W ±10% |
| 29 | Input Voltage 12.8 V |
| 30 | Effciency > 90% |
| 31 | LED make Bridelux/Maniux/OSRAM/ CREE/ Nichia/ Seoul/Phillips/ Lumiled |
| 32 | CRI > 70 |
| 33 | CCT 5500K |
| 34 | Luminous Efficacy 150m/W or better |
| 35 | Total Lumens 1800 |
| 36 | LED Lifespan minimum 50000hrs |
| 37 | Charger Type MPPT (in built inside luminiare) |
| 38 | Operating Voltage 11 ± 3% to 14.4 V ± 3% |
| 39 | Open Circuit protection, Short Circuit protection and Reverse Polarity protection inbuilt Should be provided |
| 40 | Operating Temperatue 0 to 45 degree centigrade |
| 41 | Humidity Range 90% RH |
| 42 | IP protection IP- 65 |
| 43 | IK for IP-Lens IK08 |
| 44 | Material Aluminium Extrusion/ Die Cast |
| 45 | Battery Type LiFePo4 |
| 46 | Battery Capacity (AH) 24-30Ah (Battery life cycle 2000 cycles minimum) |
| 47 | Warranty 5 years |
| 48 | Free maintenance services shall be provided by the supplier during the warranty period of five years. No payment will be made on this account as it is included in the cost of the main equipment. This maintenance service will include: a) Preventive and Routine Maintenance: It includes a minimum of two visits to individual sites, which shall be done at least once every year and shall include activities such as cleaning of modules, checking of connections of panels, PCB, DC battery connections and any other activity that may be required for the proper functioning of the system. A proper record on this account, duly countersigned by the beneficiary, will be maintained by the agency. Any spares and consumables required during the period of five years, including the replacement of any components that go bad, will be supplied free of cost by the supplier. |
| 49 | Supplying and erection of Galvanized mild steel poles class 'A' quality of 4 Meter long having nominal dia. 114 mm at bottom and nominal dia. 60 mm at top with cast aluminium embellishments-Q2. The poles are primer coated and painted with polyethane paint. Poles are suitable for single/double/tripple/four side post top/drop down luminaires. The poles has a service window at bottom comprising four way 25 amp connector terminal and a 10 amp MCB. Poles has a mild steel base plate having four nombers mounting holes as per drawing and can be mounted with four numbers anchor bolts. The pole to be mounted on a 1:3:6 cement concrete base (pedestal) of 450X450 mm and 300 mm including 4 Nos M 234X750 MM J-Type EN 8 grade foundation bolts, nuts with washers templates as required. Foundation RCC 1:2:4 shall be of size 450x450mm and depth 900 mm c/c ,connection,testing and commissioning as required complete in all respects. Make:-Twinkle (Lux Max-SP -114-N-400 Q2), Bajaj, SURYA, Wipro, Volmount as approved by Engineer-in -charge . |
| 50 | Supplying and fixing of Solar LED Post Top Lantern 18 Watt and it should be compatible with specification i.e. IP 66 , CCT 3000 to 6000K, efficacy >150 Lumens per watt, PWM frequency 25Hz, humidity range 0 to 95%, working time 10-12 hours per night, charging time 3-5 hours sun shine, light mounting height 3/4 mteter above ground level, ideal current consumption less than 3 milliampere, long life lithium battery pack(3.2 V 36 AH),PIR sensor which auotomatically detects human traffic presence adjusts LED brightness accordingly, in the range of 12 meter and the light will glow automatically at full power complete with all accessories, connections, testing and commissioning etc. as required with Five Year Warranty . Make:- Twinkle (Model no Lux Max-PT-501(IP66), Wipro, Phillips,Crompton,LT as approved by Engineer-in -charge . Please Enable Macros to View BoQ information |
