|
| 1 | Errection of tubular pole of length exceeding 10 M but not exceeding 12M in cement concrete 1:3:6 (1 cement:3 coarse: 6 graded stone aggregate 40 mm nominalsize) foundation including excavation & refilling etc as required |
| 2 | Erection of All alluminium conductor of 7/1.96 to 7/4.0 mm dia and above including binding etc as required. 14 Span x 0.394 Kg/M (DOG) x 50 M x 3 wire |
| 3 | Supplying and erection of bow stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate ofsize 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, tum buckle(20 mm X 60 cm), 7/4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundationincluding excavation and refilling and also with 0.6 m long braceof size 50 mm X 50 mm X 6 mm angle iron with 50 mm dia pulleyfixed at one end of the brace as required. |
| 4 | Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm(7.14 kg per metre) double pole cross arm for three wire 11KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded onone side to the channel iron and with bolts and nuts on the otherside for tying the cross arms together, including drilling holes forinsulator pins/fittings, bolts, nuts and washers etc (as per drawing)and painting with primer and finish paint as required. |
| 5 | Supplying and erection of a set of cross bracing FRLSame work for 11 KV over head line double pole structure having four membersfabricated out of 50 mm X 50 mm X 6 mm angle iron to form a rectangle of minimum size 1400 mm width X 2500 mm height,complete with 50 mm X 6mm M.S. flat iron clamps, bolts andnuts including drilling holes for insulator pins, bolts and nuts etc(as per drawing) and painting with primer and finish paint as required. |
| 6 | Supplying of channel iron75mmX40mmX6mm(7.14kgpermetre) pole top bracket /cross arm for single11KV overhead line conductor complete with 50mmX6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nut set cand painting with primer and finish paint as required |
| 7 | Supplyingof50mmX8mmM.S.Batironpoletopbracket/crossarmfor single 11/22/33KVoverheadlineconductorcompletewithfixingclamps, bolts, nutsandwashersdrillingholesforinsulatorpins, boltsandnutsetc and painting with primer and finish paint as required. |
| 8 | Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required. For replacement of damaged pins Insulator in complete Overhead line |
| 9 | Supplying and erection of 11 KV disc insulator for 11 KV overhead lines with galvanised insulator fittings, ball and socket typeand complete with galvanised strain clamps, bolts, nuts, washers etc. as required. For replacement of damaged disc insulator in complete Overhead line |
| 10 | supplying and erecting earth pit of minimum bore dia. 150mm size, approved make Safe Earthing Electrode consisting Pipe-in-Pipe technology as per IS 3043-1987 made of corrosion free G.I. Pipes with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for effective and maintenance free earthing as mentioned below: With 3 mtr. G.I. Pipes having outer pipe dia of 50mm having 80-200 micron galvanizing, Inner pipe dia. of 25mm having 200-250 Micron galvanizing. connection terminal dia of 12mm in nominal soil with 50 kg (Two Bag) Back filling Compound |
| 11 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m inwidth as well as 10 sqm on plan) including disposal of excavatedearth, lead upto 1.5 m, disposed earth to be levelledand neatly dressed. 2.8.1 Ordinary rock. For earthpit enclosure 0.5 Mtr X 0.5 Mtr X 0.5 Mtr X 2 no. 0.25 CUM |
| 12 | Brick work with common bunt clay modular bricks of class designation7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement: 4 coarse sand) For Earthpit enclosure 1M X 0.5M X 0.13M X 2 wall + 1M X0.24M X 0.13M x 2 wall= 0.1924 Cu.M. x 2 earthpit = 0.3848 Cu.M. |
| 13 | Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1cement: 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick For earthpit 0.5 Mtr X 0.5 Mtr X 4 wall X 2 Side x 212 SQM. |
| 14 | Providing and laying in position specified grade of reinforced cemen concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size de rived from natural sources) Earthpit cover 0.5 Mtr X 0.5 Mtr X 0.13 Mtr X 2 = 0.065 Cu.M |
| 15 | Supply & installation of Aluminum armoured cable single core 1100 voltage grade 35 sq mm. for earh connection |
| 16 | Supply & installation of Aluminum Tubular Lug 35 sq mm for earh connection |
| 17 | Dismantling of pole/street light standard/strut embeded in cement concrete etc as req. |
| 18 | Dismantlingofoverheadlinescomprisingofcopper/aluminiumoverhead conductor, Cl. wire, cross arms, insulators etc, as required. |
| 19 | Supply of 8 swg G.I. wire for cradling. 4 wire cradling - 50M*4 wire 4 cradling + 1.5M 60 no. 4 cradling = 1160 Mtrs. Weight = 0.103 Kg/M 1200 = 120Kg |
| 20 | Erection of G.I. Wire No. 8 SWG including binding etc. as required. 50M*4 wire 4 cradling = 800 Mtrs. Weight= 800*0.103 |
| 21 | Erection of cradle guard as required. 60 no. 4 cradling |
| 22 | Painting of Tubular pole of Length 11 M (19 Nos.) Including painting of cross brace and cross arms. Total painting area= Pole-19 x 9.04 + SP cross arm-03 x 0.62 + DP cross arm-08 x 2 x 0.62 + Cross brace - 13 x 2.12 |
| 23 | Supply & fixing of 11KV GOAB switch with all accessories |
| 24 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
