|
| 1 | Demolition of cement concrete (un reinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed. Note: Rate for Disposal of demolition material outside the MoD Land is included in item. |
| 2 | M&L hard core of broken stone boulder of gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15 cm thick each layer watered and rammed to a true surfaces complete all as specified and directed. |
| 3 | M&L Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) for mass concrete complete all as specified and directed. |
| 4 | Providing and laying 60mm thick laquer finish (ISI Marked) factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 5 | Providing and laying 80mm thick laquer finish (ISI Marked) factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 6 | M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 8 | M&L for 20mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified and directed. |
| 9 | M&L for chequered cement concrete tiles of size 250mm x 250mmx 20 to 22mm thick (ISI marked) of approved colour, set jointed and pointed in cement slurry in floors with grey cement and pigments complete all as specified and directed. |
| 10 | M&L for 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and directed |
| 11 | M&L for heavy duty pavement ceramic tile of size n. exc 0.36 sqm and 10 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. |
| 12 | M&L 75 mm thick PCC 1:3:6 Type C2 (using 40 mm graded stone aggregate) as in plinth protection, PCC will be laid with 12 mm gap & the gap will be filled up with bituminous joint filler type A complete all as specified and as directed. |
| 13 | M&L 100 mm thick PCC 1:2:4 Type B2 (using 40 mm graded stone aggregate) as in Floor, PCC will be laid with 12 mm gap & the gap will be filled up with bituminous joint filler type A complete all as specified and as directed. |
| 14 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 15 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails, column for trusses, rafter and fastenings and heavy bracket framing (Beam, tee, angle, tubular, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 16 | Dismantling of Asbestos cement (corrugated, semi corrugated etc)/CGI sheets in roof covering complete all as specified and directed. |
| 17 | M&L for pre-painted, galvalume aluminium zinc coating GI based profiled steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa AZ-150, as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 18 | S&F for 0.50mm thick pre-painted galvalume zinc coated GI based plain sheet of any colour having tensile strength of 550 Mpa, AZ-150 fixed as in roof covering/ cladding to wall, ridges, valley gutter etc with self tapping screws complete all as specified and directed. |
| 19 | M&L for preparation or new steel and iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 20 | M&L for preparation or new concrete surfaces of any description and applying two coats of plastic emulsion paint over a coat of primer complete all as specified and directed. |
| 21 | M&L for preparation of old concrete surfaces of any description and applying one coat of plastic emulsion paint complete all as specified and directed. |
| 22 | Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed. |
| 23 | M&L for PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) as in scoping mass concrete etc complete all as specified and directed. |
| 24 | M&L for preparing bituminous surfaces of road and marking 1.25 mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. |
| 25 | M&L 16 mm to 18 mm thick Granite slab machine cut, bedded and joined with cement and pointed with white cement with admixture of pigment to match over and including 20 mm thick screed bed CM (1:3) .the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps cooking plateforms/columan includigng rounding off the exposed edges and polishing complete all as specified and directed. |
| 26 | M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:4) complete all as specified and as directed. |
| 27 | M&L for providing precast cement concrete 1:2:4, type B0 (using 12.5mm graded crushed stone aggregate) as in precast frame for fixing of RCC louvers & Jallies (measured solid), including all mouldings of shape & design/pattern as approved of size as required and set in cement mortar 1:4, including making of post holes in any type of surface to fix the frame for RCC Jallies as per site requirement and filled with PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) complete all as specified and directed. Please Enable Macros to View BoQ information |
