|
| 1 | Cutting uprooting and clearing jungles including shrubs, water weeds,bushes, trees, plants, upto 30 cm. girth including removing as directed by Engineer-in-charge. |
| 2 | Earthwork from borrow pits over existing embankment or for repairs to embankment, closing breaches etc. within an initial lead of 30 metre and lift of 1.50 metre including breaking clods and depositing the same in layers not exceeding 25 cm. and rough dressing etc. complete as per profile. |
| 3 | Dismantling Brick/Tile Work Dismantling of existing structures like culverts, bridges,retaining walls and other structures comprising ofbrick masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as perTechnical Specifications Clause 202 for Rural Roads of MORD.(b) Cement mortar |
| 4 | Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202 for Rural Roads of MORD.(c) Above 900 mm dia Hume pipe |
| 5 | Excavation for Structures Earthwork in excavation for foundation ofstructures upto 3 m depth as per drawing and technical specification Clause 1104 for Rural Roads of MORD including setting out, construction of shoring and bracing, removal of stumps and other deleteriousmatter, dressing of sides and bottom and backfilling with approved material. |
| 6 | Hire and labour charges for Shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ply wood/steel sheet plate with required bracing for any kind of plain or reinforced concrete works in all sorts of minor structure including culvert, box culvert, crossdrain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per specification and direction. (b) Where staging |
| 7 | Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth |
| 8 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.a) Pakur Variety |
| 9 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](ii) With 1:4 cement mortar (a)20 mm thick plaster |
| 10 | Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row Providing and laying reinforced cementconcrete pipe NP3 with spigot socket for culverts on first class beddingof granular material in single row including fixing with cementmortar 1:2 as per Technical Specification Clause 1106 forRural Roads of MORD (D) 1000 mm diaNote: Add cost and carriage of Pipe to get the final |
| 11 | Neat cement punning about 1.5mm thick in wall, dado, windowsill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m |
| 12 | Fabrication , Supply, erection and commissioning of new Slide typevertical lift regulator service gates of Canal/River as per IS: 5620 -2000/Latest Revision consisting of skin plate, vertical and horizantalgrider, stiffener etc. made of MS material consisting of angle , channel, beam, plate, flat, etc. conforming to IS : 2062 -2011/latest revision manufactured as per approved drawing and direction including cost of Materials, Machinaries , Manpower, Cutting, Aligning, drilling, Welding, Finishing, Consumables, Carriages and all overheads with all leads and lifts complete as per specification (without painting)i)Width of Gate shuteer size upto 2 metre |
| 13 | Fabrication , Supply, erection and commissioning of new Flap/Fallboard shutter of Canal/River as per IS: 5620 - 2000/Latest Revisionconsisting of skin plate, vertical and horizantal grider, stiffener etc. madeof MS material consisting of angle , channel, beam, plate, flat, etc.conforming to IS : 2062 -2011/latest revision manufactured as per approved drawing and irection including cost of Materials, Machinaries ,Manpower, Cutting, Aligning, drilling, Welding, Finishing, Consumables, Carriages and all overheads with all leads and lifts complete as per specification (without painting).(ii)Width of Gate shuteer size upto 2 metrei)Width of Gate shuteer size upto 2 metre |
| 14 | Fabrication , supply, erection and commissioning of embeded partsconsisting of seal beam, Guide channel with all accessories forvertical gate of canal/river made of MS material consisting of angle,channel, beam, plate, flat, etc. conforming to IS : 2062 -2011/latestrevision manufactured as per approved drawing and direction including cost of Materials, Machinaries , Manpower, Cutting,Aligning, Anchoring, Welding, Finishing, Consumables, Carriageand all overheads with all leads and lifts complete as per specification(without painting) Remarks: Cost for civil works to betaken from PWD (R) directorate seperatlyi) Insert plate welded with J hook |
| 15 | Seal Beam |
| 16 | Guide Channel |
| 17 | Supplying, fitting & fixing of screw rod having square thread of 1.5/2T.P.I, Material bright steel [EN8/EN9/forged Cl-4 (45C8) as per IS :1875 1992/ latest Revision]. dia and thread length as required andproviding with a drilled hole of required dia on the other end afterflattened and supplying with one no. bolt and nut of required size and allother components as required as per direction of Engineer-In -Charge. The cost includes cost of material, man power employed,consumables like cutting tools, emery paper, cloths, , hire chargesof machineries, tools & tackles, grease, mobil etc including carriageloading & unloading as per direction of Engineer in charge.a) Upto length 3.0 metre |
| 18 | Supplying, fitting & fixing of screw hoisting arangement made of C.I.bottom plate , top plate, coller (free from any casting defects) withnecessary holes on base plate and top plate to accomodate thrustbearing of suitable size as per approved drawing & design and asper direction of Engineer in charge. The cost includes cost of materials,man power employed for dismantling and fitting fixing, consumables like cutting tools, bolt & nuts of required size, hire charges of machineries, like lathe/shaping machine, grinding machine, drilling machine, tools & tackles etc including carriage loading & unloading but excluding the cost of lifting Nut/Bush, thrust bearing & wheel supplied seperately. |
| 19 | Bearing no.51213 (SKF)(Thrust bearing) |
| 20 | Supplying, fitting & fixing Gun Metal Nut as per requirement having 1.5/2 T.P.I square thread for screw gearing arrangement, perfectly metting with the screw rod/gear rod for lifting the draw shutter as per direction of E.I.C.The cost includes cost of materials, man power employed, consumables like cutting tools, emery paper, cloths, , hire charges of machineries, tools & tackles etc including carriage loading & unloading. |
| 21 | Supplying, fitting & fixing of M.S fabricated pedestal stool of suitable size, consisting of bottom plate, top plate, four nos legs etc febricated with suitable sizes m.s plate, m.s angle conforming to I.S 2062 of latestrevision and as per approved drawing & direction of Engineer in charge. The cost includes cost of materials, man power employed for dismantling and fitting fixing, civil works consumables like cutting tools, gas, oxygen, welding rod, anchor bolt of required size, hire charges of machineries, like gas cutting set, welding set, tools & tackles etc including carriage loading & unloading |
| 22 | Supplying, fitting & fixing of C.I wheel in the screw hoisting system for lifting or lowering the draw shutter.The wheel consisting of suitable size hub to accomodate any size of G.M/C.I nut, rim dia 32mm and four nos arm made of minor dia 30mm. & major dia 36mm rod complete or as perapproved drawing & direction of the Engineer-in-charge.The costincludes cost of materials, man power employed for dismantling andfitting fixing, consumables like cutting tools, welding rod, hire charges of machineries, like lathe machine, grinding machine, tools & tackles etc including carriage loading & unloading. (a) Upto 60 cm. dia. Cast Iron wheel |
| 23 | Fabrication, supply, erection and commissioning of embeded partsconsisting of hinge bracket with its accessories for vertical flap gateshutter of distributories/branch canal/minor canal/channel made of MS material consisting of angle, channel, beam, plate, flat, etc. conforming to IS : 2062 -2011/latest revision manufactured as per approved drawing and direction of Engineer in charge. The cost includes cost of Materials, Machinaries , Manpower, Cutting, Aligning, Anchoring, Welding,Finishing, Consumables, Carriage and all overheads with all leads andlifts complete as per specification (without painting) |
| 24 | Cost for supplying and fitting fixing of bulb/musical node/J‐ type rubberseal(Make : Universal Moulders & Engineer/ Popular Rubber Works(Pvt) Ltd/SAB Industries/Unique Polymer Works/equivelantapproved make conforming to lS : 11855 -2011/Latest Revision)fordifferent types of gate as per direction of E.I.C. The cost includescost of man power employed for fitting fixing, cost of rubber seal,hire charges of tools & tackles, scaffolding and safety equipmentsetc including carriage loading & unloading but excluding supply of ms clamp/ flat plate, bolts, nuts and washer. a) hollow bulb:size-O.D 45,I.D 16mm flat portion100x14mm |
| 25 | Cost for supplying and fitting fixing of angle type(L type) rubber seal(Make : Universal Moulders & Engineer/Popular Rubber Works (Pvt) Ltd/SAB Industries/Unique Polymer Works/equivelant approved make conforming to lS : 11855 -2011/Latest Revision) for different types of gate as per direction of E.I.C. The cost includes cost of man power employed for dismantling & fitting fixing, cost of rubber seal, hire charges of tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading but excluding supply of ms clamp/ flat plate, bolts, nuts and washer. a) size: (88mm+60mm+08mm) x14mm(thick) |
| 26 | Supplying of M.S flat for clamping Rubber seal with hole as per direction of EIC {(Flat bar Size: (50x10)mm, (500x8)mm)} |
| 27 | Supplying of M.S bolts with nut for clamping Rubber seal as per direction of EIC |
| 28 | Holding down bolt with nut including 100 x 100 x 6 mm plate washerat bottom fitted complete and packing the hole with cement concreteor cement grout as directed.(ii) 20 mm dia bolt.(a) 300 mm long |
| 29 | Painting of embedded parts, all types of gates, stoplogs and barscreen/ gratings etc on prepared surfaces with one coat of inorganic zinc silicate primer (airless s p r a y preferred)70+/ - 5 micron and two super coatswith a total thickness of 300 microns (each 150+/- 5) of solventless coaltar epoxy paint each coat 150 microns ( total 300 microns)including cost of all materials, labour, scaffolding etc., complete with all leads andall lifts. Please Enable Macros to View BoQ information |
