|
| 1 | A. Acoustic System:-Wall Upper Portion:- Supply and installation of Fabric Covered wood wool panel of size 1200 x 600 x 20mm mounted on supplied GI Frame work consisting of basic profile, main profile & edge profile. Frame work consists of 25mm thick GI wall channels with fully knurled surface of 0.55mm thick 80mm width, having two equal flanges of 26mm. A GI wall channel is fixed vertically over the horizontlly laid wall channel at 600mm C/C. The frame work shall wood wool panel will be back lined by using 50mm polyster wool having a density of 1000 GSM and 50mm thick. |
| 2 | Wall Lower Portion:- Supply and installation of 12mm thick Laminated plywood backed with 50mm thick 1000 GSM polyster wool. Frame work consists of 25mm thick GI wall channels with fully knurled surface of 0.55mm thick 80mm width, having two equal flanges of 26mm. A GI wall channel is fixed to the walls in horizontal direction with the help of suitable fastners at 600mm C/C then an another 25mm thick GI wall channel is fixed to the vertically over the horizontlly laid wall channel at 600mm C/C. |
| 3 | Stage Side & Rear Wall:- Supply and installation of 50mm thick 1000GSM polyfiber based acoustic panelling covered with black colour Fabric. |
| 4 | Main Hall Plain Gypsum Ceiling:- Supply and installation of 12.5mm thick plain gypsum plaster board Suspended by using C System which includes Main channel at every 1200mm. Frame work shall consists of GI perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm) fixed along with perimeter of the gypsum or walls with the help of nylon sleeves and screws at 600mm C/C. the Gypsum board will be painted as per selected colour shade. |
| 5 | Main Hall 2X2 grid Ceiling:- Supply and installation of 600X600 x 15mm thick Grid Ceiling Area having density 15 mm (c. 4.5 kg/m2), NRC upto 0.70, Reaction to fire, : A2-sl, d0 as per EN 13501-1, Sound attenuation: Dn,c,w= 34 dB as per EN 20140-9 (15mm thickness, according to test certificate). Frame work shall consists of GI perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm) fixed along with perimeter of Gypsum or walls with the help of nylon sleeves and screws at 600mm c/c. Then suspend GI main channels of size 45 mm (0.9mm thick with 2 flanges of 15mm each) from the soffit at 1200mm c/c by using soffit angle of size 25mm x 10mm x 0.55mm thick fixed to true ceiling by using suitable fasteners. Cross channels of size 0.55mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the main channel with the help of connecting clips and in a direction perpendicular to the main channel at 300mm c/c. |
| 6 | Main Hall Perforated Gypsum Ceiling:- Supply and installation of 2.5mm thick Perforated Gypsum plaster board Suspended by using C System which includes Main channel at every 1200mm. The suspension is done with all accessories like cleat, leveling clips & wire rods as per the dwgs along the perimeter as indicated in the drawing, the gypsum plaster board will be back lined with 50mm thick 1000GSM polyster wool. The Gypsum board will be painted as per the approved color by the department. |
| 7 | Above Stage 2X2 Grid Ceiling:- Supply and installation of 600X600 x 15mm thick Grid Ceiling Area having density 15 mm (c. 4.5 kg/m2), NRC upto 0.70, Reaction to fire, : A2-sl, d0 as per EN 13501-1, Sound attenuation: Dn,c,w= 34 dB as per EN 20140-9 (15mm thickness, according to test certificate). Frame work shall consists of GI perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm) fixed along with perimeter of Gypsum or walls with the help of nylon sleeves and screws at 600mm c/c. Then suspend GI main channels of size 45 mm (0.9mm thick with 2 flanges of 15mm each) from the soffit at 1200mm c/c by using soffit angle of size 25mm x 10mm x 0.55mm thick fixed to true ceiling by using suitable fasteners. Cross channels of size 0.55mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the main channel with the help of connecting clips and in a direction perpendicular to the main channel at 300mm c/c. |
| 8 | Above Stage Plain Gypsum Ceiling:- Supply and installation of 12.5mm thick plain gypsum plaster board Suspended by using C System which includes Main channel at every 1200mm. Frame work shall consists of GI perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm) fixed along with perimeter of the gypsum or walls with the help of nylon sleeves and screws at 600mm C/C. the Gypsum board will be painted as per selected colour shade. |
| 9 | Stage Flooring:- Providing and fixing of 2 Layers of 19MM BWP Plywood to be fixed in MS Frame by using screws, then 8MM Wooden Laminate Flooring of approved shade or texture, or combination thereof) as required at all levels in floors, risers and treads backlined with 2MM Foam to be fixed on surface of the Stage Floor. |
| 10 | Auditorium Flooring:- Providing and Fixing 2.0MM thick Vinyl Flooring thickness of wear layer:- 0.1mm. |
| 11 | Stage Proscenium:- Supply and Fixing of Stage Proscenium by using 12MM Ply to be fixed on fabricated MS Structure and then finished with Mic pasted of approved colour. |
| 12 | Acoustic Doors:- Providing & fixing of double leaf Accoustic Doors made using 100mm thick hard wood hollow framing filled with 24 Kg/M3 density fibre glass wool, fixed with 12mm water prrof ply wood on both sides, finally pasted with teak vineer on both sides duly polished, consisting of peripheral seals all around on existing 150mm wide Sal chowkhat, with small 150mm X 150mm glass window, with complete hardware. |
| 13 | B. Audio System:-FOH Array Speaker:-Supply, Installation, Testing and Commissioning of Arayable 2 Way 12\\" Constant Curvature Loudspeaker with Dendritic Waveguide for Touring. Frequency Response:- 65 Hz - 20 kHz +3 dB, 53Hz-20 kHz-10 dB, Nominal Dispersion:- 100o H x 15o V @ -6 dB points, Directivity Factor (Q):- 31.4, Directivity Index (DI):- 15, Power Handling (IEC):- Passive: 600 W continous, 2400 W peak (Make:- Turbosound/Tannoy/ Renkus Heinz) |
| 14 | Supply, Installation, Testing and Commissioning of 4-Channel Class TD Power Amplifier delivering 4 x 600 W @ 2 Ohms, 4 x 1700 W @ 4 Ohms, 4 x 1200 W @ 8 ohms and 4 x 625 W @ 16 ohms, 1600 W into 70V/ 100V, 2400 W @ 4 ohms bridged, 3400 W @ 8 Ohms, bridged.(Make:- Labgruppen/ Powersoft/ Renkus Heinz) |
| 15 | Supply, installation, testing and commissioning of Fly Bar for suspending Array Speaker and subwoofer.(Make:- Custom) |
| 16 | Subwoofer System:- Supply, installation, testing and commissioning of 700 Watts continous, 2,800 Watts peak power; front loaded Subwoofer; Dual voice coil design for high power capacity and extended low frequency output; Frequency response31 Hz - 300 hz - 10 dB; Maximum SPL 127 dB continous, 133 dB peak; Impedence 8 Ohms.(Make:- Turbosound/ Tannoy/ Renkus Heinz) |
| 17 | Supply, installation, Testing and Commissioning of 800 Watts Continous Power Handling, 18\\" Front Loaded Subwoofer System; Frequency Response of 38 Hz - 200 Hz + 3 dB 32 Hz - 200 Hz - 10 dB; sensitivity 97 dB; Nominal Impedence 8 Ohms.(Make:- Turbosound/ Tannoy/ Renkus Heinz) |
| 18 | Supply, installation, Testing and Commissioning of 2-Chanel 7000 W power amplifier delivering 3500 W @ 2 Ohms, 2800W @ 4Ohms, 1450 W @ 8 Ohms, 7000 W @ 4 Ohms bridged, 5600 W @ 8 Ohms bridged, Class TD.(Make:- Labgruppen/ Powersoft/ Renkus Heinz) |
| 19 | Fill/ Delay Speaker:- Supply, installation, Testing and Commissioning of 130 Watts Continous, 520 Watts peak power 8\\" Dual concentric Full Range Loudspeaker, Frequency response 85 Hz - 35 kHz + 3 dB; Maximum SPL 113 dB continous, 119 dB peak.(Make:- Turbosound/ Tannoy/ Renkus Heinz) |
| 20 | Supply, Installation, Testing and Commissioning of 2-Chanel 1200 W power amplifier with integrated DSP delivering 500 W @ 2 Ohms, 600W @ 4Ohms, 300 W @ 8 Ohms, Network control via Intellidrive Controller TM touch-based GUI.(Make:- Labgruppen/ Powersoft/ Renkus Heinz) |
| 21 | Control Room Speaker: Supply, Installation, Testing and Commissioning of Mid-size All-weather, Surface Mount loudspeaker With A Coaxially Mounted 19 mm (0.75 inch) Dome Tweeter; Frequency Range of 65Hz to 30khz and is capable of handling 120 Watt Programme material and Peaks up to 240 Watts, System Sensitivity (1 W @ 1 m)2 88dB; Nominal Impedence 6 Ohms.(Make:- Turbosound/ Tannoy/ Renkus Heinz) |
| 22 | Supply, Installation, Testing and Commissioning of 2-Channel Class D Power Amplifier delivering 120W output power into 8,4,2 Ohms, 60 W onto 16 Ohms.(Make:- Labgruppen/ Powersoft/ Renkus Heinz) |
| 23 | Green Room Speaker: Supply, Installation, Testing and Commissioning of Mid-size All-weather, Surface Mount loudspeaker With A Coaxially Mounted 19 mm (0.75 inch) Dome Tweeter; Frequency Range of 65Hz to 30khz and is capable of handling 120 Watt Programme material an Peaks up to 240 Watts, System Sensitivity (1 W @ 1 m)2 88dB; nominal Impedence 6 Ohms.(Make:- Turbosound/ Tannoy/ Renkus Heinz) |
| 24 | Supply, Installation, Testing and Commissioning of 2-Chanel Class D power Amplifier delivering 120W output power into 8,4,2 Ohms, 60 W onto 16 Ohms.(Make:- Labgruppen/ Powersoft/ Renkus Heinz) |
| 25 | Stage Monitor Speaker:- Supply, Installation, Testing and Commissioning of 1100 Watt 2 Way 15\\" Full Range Powered Loudspeaker with KLARK TEKNIK DSP Technology; 1\\" High Temperature Dome Compression Driver With Extended High Frequency Reproduction.(Make:- Turbosound/ Tannoy/ Renkus Heinz) |
| 26 | DSP:- Supply, Installation, Testing and Commissioning of Loudspeaker Management System.(Make:- Behringer/ DBX/ Clearone) |
| 27 | Mixing Console:- Supply, Installation, Testing and Commissioning of 32-Chanel Audio Mixing Console. Precision equalization circuitry, True 7-bus architecture, 2 stereo inputs 2 stereo returns, Channel direct outputs, 6 aux sends, 4 of which are pre/post switchable, Integral universal voltage, switched-mode PSU for light weight Talkback facility, 100mm faders, + 48 phantom power.(Make:- Soundcraft/ Behringer/ Allen & Heath) |
| 28 | Supply and Installation of Reverb Interface.(Make:- Boss/ Behringer/ Lexicon) |
| 29 | Supply and Installation of Delay Interface.(Make:- Boss/ Behringer/ Lexicon) |
| 30 | Microphones:- Supply, Installation, Testing and Commissioning of Table Top Gooseneck Microphone with Base having on/off switch.(Make:- Sennheiser/ Audio Technica/ Shure) |
| 31 | Supply, Installation, Testing and Commissioning of Wireless Vocal Hand Held Microphone Set With Dynamic Cardiod Microphone Capsule; Enhanced Frequency Bank System With up to 12 Compatible Frequency Response 80Hz - 180 kHz; AF Sensitivity 2.5 mV/Pa.(Make:- Sennheiser/ Audio Technica/ Shure) |
| 32 | Supply, Installation, Testing and Commissioning of Wired, Dynamic Instrument Super-cardioid Microphone For Speech and Vocals with Noiseless On/Off Switch.(Make:- Sennheiser/ Audio Technica/ Shure) |
| 33 | Supply, Installation, Testing and Commissioning of Cardioid Dynamic Instrument Microphone Specifically Designed For Drum Applications, Featuring a very short body with integrated stand mount and a aniversal rim clip; frequency response 40Kz - 18Khz. (Make:- Senheiser/ Audio Technica/ Shure) |
| 34 | Supply, installation, testing and commissioning of long Microphone Stand. (Make:- Ahuja/ MX/ Softline) |
| 35 | Cable Connectors:- Supply and laying of high flexible speaker cable for power amplifiers up to 4000 Watts 224 strands of 0.15 mm bare cupper wires. (Make:- Gotham/ Klotz/ Belden) |
| 36 | Supply and laying of high flexible speaker cable for power amplifiers up to minimum 500 Watt, Jacket - PVC, Ø 0.32 in, black Conductor-Stranded bare cupper wires, 140x35 AWG (13AWG). (Make:- Gotham/ Klotz/ Belden) |
| 37 | Supply and Laying of Audio Signal Cable, Balanced microphone cable with single shield, high flexible, velvet faint PVC-Jacket, Conductor: Stranded bare copper wires 28 x 0.10 mm (0.22mm2), Jacket:PVC, 6.0 mm max. Ø (Make:- Gotham/ Klotz/ Belden) |
| 38 | Supply and Installation of Stage Box with 8 x XLR Connector (Make:- Neutrik/ Amphenol/ MX) |
| 39 | Supply and laying of 8 Channel Snake cable. |
| 40 | CAT6 Cable (Make:- D-Link/ Netgear/ Digisol) |
| 41 | Supply and Installation of XLR connectors Male (Make:- Amphenol/ Neutrik/ Gotham) |
| 42 | Supply and Installation of XLR connectors Female (Make:- Amphenol/ Neutrik/ Gotham) |
| 43 | Supply and installation of 1/8\\" (3.5mm) Balanced Phono Plug. (Make:- Amphenol/ Neutrik/ Gotham) |
| 44 | Supply and installation of 1/4\\" Unbalanced Phono Plug. (Make:- Amphenol/ Neutrik/ Gotham) |
| 45 | Supply and installation of Speakon connectors. (Make:- Amphenol/ Neutrik/ Gotham) |
| 46 | Supply and installation of 24 U Equipment Rack. (Make:- Nettrack/ Valrack/ Link Eu) |
| 47 | Supply and installation of PVC Conduit/ Raceway (Make:- AKG/ Berlia) |
| 48 | Supply and installation of 10 KVA Servo Stabilizer. (Make:- Vertex/ Sharp/ Electro) |
| 49 | C. Stage Lighting:-SITC of 150W High Quality LED Parcan Light complete with, Lamp source 3200K CCT Colour temperature CRI & TLCI Values above 95 COB LED ssource from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) DmX 512 dimming with 3 channel control Beam Angle of 11o/25o/35o Total Power Consumption of 165W High quality output replacing 1000W Halogen Par Flicker Free 100% for Tv & Flim Cameras 11.7KHz Refresh rate, Linear Dimming 0-100% Fuse and internal safety protections Strobe option Adjustable 1-25 times/sec Variable Fixture provided with Yoke of Manual Adjustment 5 Pin XLR for DmX Black powder coated body. RDM Control options with latest technology (RDM ID to be specified).(Make:- Leksa/ Makerich/ Austra Lighting) |
| 50 | SITC of 300W LED Profile Spot 19 Degree Light complete with, 3200K CCT Colour temperature, COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) CRI & TLCI above 95 Strobe option Adjustable 1-25 times/sec 4 kinds of dimming curves, Black finish housing Manual Focus with 4 Beam shaping cutters Efficient and well-designed Lamp reflector Efficient Copper tube based Heat Sink for Heat Dissipation Sleek and Unique Designed Light weight body Fixture provided with Yoke of Manual Adjustment DmX 512 dimming with 1 or 3 Channel modes IP20 protection having Lux @ 3 Mtr above 12040 suitable to illuminate the key presenter or talent on stage. illuminate the key presenter or talent on stage. RDM Control options with latest technology (RDM ID to be specified) LM79 Certificates from NABL Accredited laboratory Certification having BIS complaint to IS 10322 (Part 5/ sec 1):2012. CE Certification complaint to EN60598-1:2015, EN61437-2-13:2014. Brand embossed impact on the light body for genuine product.(Make:- Leksa/ Makerich/ Austra Lighting) |
| 51 | SITC of 400W LED Blinder Light 30 Degree complete with 3200K CCT 4x100W Chip on Board LED Lamps source COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) DmX 512 dimming with 4/8 channel modes CRI & TLCI Value>90 Strobe option Adjustable 1-25 times/Sec Variable. (Make:- Leksa/ Makerich/ Austra Lighting) |
| 52 | SITC of 200W LED Freshnal Light having COB LED Source from Citizen/Phillips/Osram/Cree or reputed make (LM80 to be provided) 3200K colour temperature High quality uniquely designed Fresnel Lens CRI, TLCI and R9 vale above 96 LED COB Based Source No multiple Shadows- Single source illumination Total Power Consumption of 210W Linear dimming 0-100% Adjustable Flicker Free for high FPS, Power AC90- 260V, 50/60HZ Working Temperature -+ 40o - 30o Active cooling with Low noise Fan (Make:- Leksa/ Makerich/ Austra Lighting) |
| 53 | SITC of 18 x 10W LED Par Light RGBW, beam Angle 25o complete with LED source from lumi led/ Seoul/ nichia or reputed make (LM80 to be provided) RGBW 10W Lamp source x 18 Pcs DmX 515 dimming with 8 Channel light bridght Red, green, blue, White LED's Source Unlimited Colour mixing through DmX 0-100% Linear dimming, in built presets for different colours Strobe Mode 20 times/Sec Data DmX through 63/5 Pin XLR's 65dB Sound Sensing capacity Power in and Out Connections High precision colours, IP20 protection Powder coated Black finish housing Having Sound Control & Master Slave Auto run Mode Illuminate the Indoor stage with unlimited colour effects Rigidly built pressure die-casted Aluminium body. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS complaint to IS 10322 (Part 5/ Sec 1) : 2012 CE Certificates from NABL Accredited laboratory. Brand embossed impact on the light body for genuine product.(Make:- Leksa/ Makerich/ Austra Lighting) |
| 54 | SITC of 54 x 3W LED 3200K Par Light beam Angle 25o complete with LED 3200K 3W Lamp source x 54 Pcs LED source from Lumi led/ Seoul/ Nichia or reputed make (LM80 to be provided) Having CRI TLCI Values above 95 Flicker Free for high FPS Smooth fade in and Fade out High precision steady colour No heat, DmX 512 dimming with 2 Channel 0-100% Powder Coated Black finish housing Rigidly built pressure die-casted Aluminium body LED Easy view display Data DmX through 3/5 Pin XLR's 65 dB-130dB Sound sensing capacity Power In and Out Connections Total Power Consumption of 180W Sound Active Mode Control IP20 protection. RDM Control options with latest technology (RDM ID to be specified) LM79 Certificates from NABL Accredited Laboratory Certification having BIS complaint to IS 10322 (Part 5/ Sec 1) : 2012 CE Certificates complaint to EN60598-1: 2015, EN61437-2-13: 2014 Brand embossed impact on the light body for genuine product.(Make:- Leksa/ Makerich/ Austra Lighting) |
| 55 | SITC of 180W LED CCT tuneable Light complete CCT Tuneable Lamp Source LED source from Lumi led/seoul/Nichia or reputed make (LM80 to be provided) Having CRI TLCI Values above 95 High precision steady colour No heat, Dmx 512 dimming with 2 Channel Beam Angle 15o/25o/45o 0-100% Smooth dimming, Powder coated Black finish housing Rigidly built pressure die-casted Aluminium body LED Easy view display Flicker Free for high FPS Smooth fade in and Fade out Data DmX through 5 Pin XLR's Total Power Consumption of 180W Sound Active Mode Control IP20 protection. 65dB-130dB Sound sensing capacity Power In and Out Connections RDM Control options with latest technology (RDM ID to be specified) LM79 Certificates from NABL Accredited laboratory Certification having BIS complaint to IS 10322 (Part 5/ Sec 1):2012. CE Certification complaint to EN60598-1:2015, EN61437-2-13:2014. Brand embossed impact on the light body for genuine product.(Make:- Leksa/ Makerich/ Austra Lighting) |
| 56 | SITC of Aluminium O Type clamp made up of high grade aluminium having thickness not less than 5mm suitable for round tubes of dimension varying from 40 to 55mm outer diameter, provided with fixture mounting 25mm M8 bolt and wing nut, minimum 100Kgs of safe working load, 40mm bolt and wing nut for pipe locking. |
| 57 | SITC Light Fixure dual safety Chain made up of GI wire rope Bundled and twisted together Having load bearing capacity above 200 Kgs Sleeve on the rope. Carabinder Clip (Make:- Leksa/ Markrich/ Austra lighting) |
| 58 | SITC of Suspender cum clamps designed made out of MS material 150mm x150mm x 5mm MS Base plate Threated rod, Black powder coated finish. All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Suitable to hold various type grid & other rigging systems.(Make:- Leksa/ Markrich/ Austra lighting) |
| 59 | SITC of Fixed stage Lighting bar/which of 12Mtr length constructed with an dual construction light bar with an Mild Steel 40NB 48 OD black matt finish with an supporting flat patti of height 200mm x 50mm x 6 mm thickness for the extra support with 2 holes of 10mm diameter to fix the cable tray on the bar. It shall be hanged from the roof to accommodate various type stage light fittings. It should hang from the roof with MS angle which is suspended from the fish plate of 5mm thickness which is fixed on the RCC roof with 4 anchor fasteners of 10mm whcih can take an total load of 400KG each fastener. Made out of 48mm Outer Dai, 40 Nominal Bore Material for the light bar shall be of Mild Steel Pipe. Dual Barrel Arrangement Powder coated with matt black Texture Fixing through Suspenders as per site conditions Dual Construction and an additional End Caps on the pipe end shall be there Light bar length shall be of customized type as per site condition. Upper pipe of dual construction is used to anchor the bar lower pipe of dual construction is used to hang the light fixtures.(Make:- Leksa/ Markrich/ Austra lighting) |
| 60 | SITC of Fixed stage side Ladder as per the design, Size of 600mm x 2400mm, Manual movable Made out of 40NB 48 OD Mild steel pipe dual barrel Dual Barrel Arrangement Dual Construction Powder coated with Matt black Texture Single Construction with cross connecting pipes Cross connecting Pipes at every 600mm Ladder can be moved along the track or adjusted as required, Spud & Trolly, Pivoted or Fixed Suspenders as er site conditions. (Make:- Leksa/ Markrich/ Austra lighting) |
| 61 | SITC of Fixed FOH Lighting bar/winch of 13Mtr length constructed with an dual construction light bar with an Mild Steel 40NB 48 OD black matt finish with an supporting flat patti of height 200mm x 50mm x 6mm thickness for the extra support with 2 holes of 10mm diameter to fix the cable tray on the bar. It shall be hanged from the roof to accommodate various type of stage light fittings. It should hang from the roof with MS angle which is suspended from the fish plate of 5mm thickness which is fixed on the rcc roof with 4 anchor fasteners of 10mm which can take an total load of 400KG each fastener. Made out of 48mm Outer Dai, 40 Nominal Bore Material for the light bar shall be of Mild Steel Pipe. Dual barrel Arrangement Powder coated with matt black Texture Fixing Through Suspenders as per site conditions Dual Construction and an additional End Caps on the Pipe end shall be there light bar length shall be customised type as per site condition. Upper pipe of dual construction is used to anchor the bar lower pipe is effectively used to hang the light fixtures. (Make:- Leksa/ Markrich/ Austra lighting) |
| 62 | SITC of Power Distribution Electrical panel having a Incomer of 100A. Floor mount/ rack mount/ wall mount. Miniature circuit brakers of single poles shall be fixed of different ratings from 6/10/16/25A as per the lighting fixtures. Wiring inside the module for power, control protection and instrument etc. shall be done with use of 1100 V confirming to IS 694 and IS 8130. All welding slag grounded off and welding pits wiped smooth with plumber metal. Power panels shall be designed in such a way that the internal space is sufficient for hot air movement, and the electrical component does not attain temperature more than 40 degree Celcius. Fabricated panel.(Make:- Leksa/ Markrich/ Austra lighting) |
| 63 | SITC of High quality power junction box 4 way made up of MS Sheet metal fabricated housing. Snap fit fixing/ 15 (1.5mm) Total Max Rating 10A, 250V A.C 20o C to +70o C Operating Temp Mouldings: Nylon, Flammability Rating UL94V-0 Black Powder coated, fibre glands of suitable size fitted with Powecon or IEC connector Box 10A. Clamp arrangement for fixing or raul plug arrangement for wall/ floor fixing. |
| 64 | SITC of High quality power junction box 2 way made up of MS Sheet metal fabricated housing. Snap fit fixing/ 15 (1.5mm) Total Max Rating 10A, 250V A.C 20o C to +70o C Operating Temp Mouldings: Nylon, Flammability Rating UL94V-0 Black Powder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plug arrangement for wall/ floor fixing. |
| 65 | SITC of High quality dimming in junction box 1 way made up of MS Sheet metal fabricated housing High temperature resistant insulator material All metal housing offers best overall RF protection & electromagnetic shielding Black powder coated, fibre glands of suitable size fitted with 5 Pin DmX XLR Male socket Clamp arrangement for fixing or Raul plug arrangement for wall/floor fixing. |
| 66 | SITC of High quality dimming Out junction box 1 way made up of MS Sheet metal fabricated housing High temperature resistant insulator material All metal housing offers best overall RF protection & electromagnetic shielding Black powder coated, fibre glands of suitable size fitted with 5 Pin DmX XLR Female socket Clamp arrangement for fixing or Raul plug arrangement for wall/floor fixing. |
| 67 | SITC of DmX Loop Junction Box having 1 No. of DmX 5 Pin XLR Female Socket & 1 No. DmX XLR Male Socket fitted on to a sheet metal fabricated compact junction box powder coated with matt black texture finish paint. High temperature resistant insulator material All metal housing offers best overall RF protection & electromagnetic shielding. Clamp arrangement for fixing or Raul plug arrangement for wall/ floor fixing. |
| 68 | SITC of Internal Earthing System with copper bare conductors all along the cable trays, metal parts and Installation Hardwares. |
| 69 | SITC Black Powder coated cable trays made out of MS Sheet fabriacted for a size of 40 x 150 x 40mm & 1.6mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free with perforation for heat dissipation provided with lid. |
| 70 | SITC Black Powder coated cable trays made out of MS Sheet fabriacted for a size of 40 x 75 x 40mm & 1.6mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free with perforation for heat dissipation provided with lid. |
| 71 | SITC of Dmx Male Female Connectors 5 Pin having rubber sheath protection for cross connecting Dmx wiring connections. |
| 72 | SITC of Dmx Male Termination Connector 5 Pin soldered with required capacity of resistor for signal defaming. |
| 73 | DmX Touch Screen based controller having 7\\" Multi touch screen option 2 DmX Outlets 5 Pin XLR's, 512 Channels each, Optically isolated outputs, 4 smooth Encoders for control operation of attributes, Backlit keys, 12 Fader Stacks, 600+ Playbacks, 350+ Group saving, 350+ Presets, User defined shape effects, Macro saving options, External Midi timecode options, Internal clock, Shortcut user interfaces, Master fader, Blackout key under Master fader, Numerical keypad for the light command entry inbuilt embedded within controller, USB interfaces, Scene saving options, Show saves and load save features, custom built user interface library for fixture files. |
| 74 | SITC Opto isolated RDM enabled DmX splitter unit provided with, 8 isolated outputs Slow blow safety fuse 5 Pin XLR for output interface Dual mode to select 2 universe operation DmX Input through 5 Pin XLR Connector Control Protocol RDM and DMX 512 Powder coated compartment finish Mounting brackets for grid mount. |
| 75 | SITC of FRLS Copper unarmoured Flexible cable IS694 having 3 Core each of 1.5 Sq mm size. |
| 76 | SITC of 5 Core DmX Cable with Sheathed housing on the cable well designed insulation, low noise suitable to transmit DmX signal. |
| 77 | D. Stage Crafting:-SITC of Suspender cum clamps designed made out of MS material 150mm x 150mm x 5mm MS Base plate Threaded rod, Black powder coated finish All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Suitable to hold various type grid & other rigging systems. |
| 78 | SITC of C Profile MS Hot rolled strips 3mm thick with Extra U bend used either to create basic supports Customized 40 x 50mm, All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Makes easier to suspend all the stage machinery Duly powder coated Matt black texture finish paint. |
| 79 | SITC of Motor Control Panel with DmX & Manual selectable Motor control panel, cum remote control 2 Way providing power input for motors internally neatly wired with contactors having individual motor control with required Push button, Emergency trip, RYB indicators, Supply indicator. |
| 80 | SITC of Cable Connecting Circuit Boxes for the termination of cables from Electrical panel to the grid level point made out of MS Sheet metal fabricated housing duly powder coated with matt black texture finish paint, fitted with required channels and ivory connectors, necessary glands etc. |
| 81 | SITC of FRLS Copper unarmoured Flexible cable IS694 having 7 Core each of 1.5 Sq. mm size. |
| 82 | SITC of FRLS Copper unarmoured Flexible cable IS694 having 4 Core each of 4 Sq. mm size. |
| 83 | SITC of High quality Velvet fabric fire retardant treated as per approved colour and make with a gathering of 100% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Main Curtain) Size: 22Mtr x 8 Mtr. |
| 84 | SITC of Glazed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Rear Curtain) Size: 17Mtr x 8 Mtr. |
| 85 | SITC of Glazed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Frills) Size: 13Mtr x 1.2 Mtr. |
| 86 | SITC of High quality Velvet fabric fire retardant treated as per approved colour and make with a gathering of 100% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Main Valance) Size: 26Mtr x 1.5 Mtr. |
| 87 | SITC of Glazed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 0% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Wing) Size: 8Mtr x 1.5 Mtr. |
| 88 | SITC of On Stage Fixed Frill Bar 17Mtrs Length Straight as per the design made out of 40 NB 48 OD Mild steel pipe dual barrel, supported to hang the frill, connected with MS Flat duly powder coated with matt black texture finish paint. All the masterials under gone through 7 tank process with various chemical treatment to keep them rust free. |
| 89 | SITC of On Stage Fixed Valance Bar 16 Mtr Length Straight as per the design made out of 40 NB 48 OD Mild steel pipe dual barrel, supported to hang the Main Valance of the stage system duly powder coated with matt black texture finish paint. All the masterials under gone through 7 tank process with various chemical treatment to keep them rust free. |
| 90 | SITC of Fixed Wing Structure designed as per site condition for a height approx 8Mtr x 1.5Mtr made up of MS Square tube of 25mm or heigher size rested on pivotable trolley on a track for the rotation of the wing. Adjustable floor locking screws jacks with rubber grips. Inverter 4-Wheeler Trolley with Flexi Adaptor Clamp and 360o Rotatable. |
| 91 | Motorized DMX operated Main Curtain 22 Mtrs straight, Centre parting as per design. This mechanism shall be provided with 01 Nos. of 1 HP /1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. 415VAC Motor with Brake for Motor System to lift a load which should be synchronized with Motor Control centre Panel. Winch shall have 3 phase motor with and RPM of 1440, KW (HP): 0.74(1)/1.1 (1.5), Frame: 90S, EFF:75.0%, MTG:B5, AMP:2.7Y, Volt: 415v, DE BRG: 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG: 6205Z, IP:55, AMB:50 degree. The outer surface temperature is limited. It shall have a Worm Reduction gearbox with GMRV-90 80:1, 90B5, Single reduction 7.5:1 to 100:1 and the size shall be 90. It shall have a drive unit base frame to fix the gear box which contains one shaft Made up of I Track for complete length Curtain holding trollies with bal bearings for smoother noiseless movement consisting of 4-wheeler master trolley and 2-wheeler trolley placed uniformly of specific interval of 200mm/ 250mm throughout the track Overlap of 0.5-0.9 Mtrs. Mptor Cable termination box Trollies are uniformly distributed along the track at every 200/250 mm with a master trolley. Open and close limit controller, Drive unit with suirtable capacity of motor unit, Wire Rope shall be of GI Wire ropes Min 3mm Dai Underground through various chemical treatment to keep them rust free, Black texture finish paint. All metal parts are powder coated. |
| 92 | Motorized DMX operated Rear Curtain 17 Mtrs straight, Centre parting as per design. This mechanism shall be provided with 01 Nos. of 1 HP /1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. 415VAC Motor with Brake for Motor System to lift a load which should be synchronized with Motor Control centre Panel. Winch shall have 3 phase motor with and RPM of 1440, KW (HP): 0.74(1)/1.1 (1.5), Frame: 90S, EFF:75.0%, MTG:B5, AMP:2.7Y, Volt: 415v, DE BRG: 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG: 6205Z, IP:55, AMB:50 degree. The outer surface temperature is limited. It shall have a Worm Reduction Gearbox with GMRV-90 80:1, 90B5, Single reduction 7.5:1 to 100:1 and the size shall be 90. It shall have a drive unit base frame to fix the gear box which contains one shaft Made up of I Track for complete length Curtain holding trollies with ball bearings for smoother noiseless movement consisting of 4-wheeler master trolley and 2-wheeler trolley placed uniformly of specific interval of 200mm/ 250mm throughout the track Overlap of 0.5-0.9 Mtrs. Mptor Cable termination box Trollies are uniformly distributed along the track at every 200/250 mm with a master trolley. Open and close limit controller, Drive unit with suirtable capacity of motor unit, Wire Rope shall be of GI Wire ropes Min 3mm Dai Underground through various chemical treatment to keep them rust free, Black texture finish paint. All metal parts are powder coated. |
| 93 | Supply, Installation, Testing and Commissioning of cyclorama for the stage by fixing 35x35x5mm MS angle on the wall with MS angle hold fasts secured to the walls & 40mm dia 14G MS pipe welded to it as per the drgs. Further 40 mm dia pipe welded to it at 600 centres vertically at an angle of 45 deg. & finally welding 40 mm dia pipe horizontally to it. The pipe to be supported away at 200mm centres by MS pipe. All metal parts are black painted with 1coat of red oxide and 2 coat of black paint with black texture finish paint. The cycloram frame to be supported by MS Angle hold of fasts of 35x35x5 mm on the wall at 1200mm centres. Finally fixing PVC perforated screen, cyclorama cloath as per approved sample & fixing by cotton dori 10mm thick complete. Size App. 14000 x 6000 mm |
| 94 | E. Audotorium Chairs:Supply of Fixed black chair with tip up seat. Structure> Stand- to be 200 x 75 x 11 mm embossed of 2.5mm CRCA base welded to 38 x 38 x 2 mm, CRCA tube 22\\", long further supported to 38 x 38 x 2 mm- 11\\" long CRCA tube, > Tip-Up movement supported by 200 x 75 x 6 mm MS Flat MS twin support 12 mm in Dia., > Seat Bracket to be 12 x 25 x 100 mm MS Flat welded to a plate of 80 x 100 x 3 mm., > Black Bracket to be 200 x 70 x 70 mm by 1.6 mm CRCA sheet with 2 longitudinal holes for bolting.Black> Plywood size 580 x 450 x 12mm thick and PU foam wil be 580 x 450 x 80 mm having density of 45 U+ 5 kg/m3 & dully upholestered with foam lamination fabric cover. All bolts to be recieved by dash nuts CNC milled threated and nailed of size 20 x 10 mm. > Option- 1) ABS Semi-Gloss full back shell.Seat > plywood size 430 x 450 x 17mm thick and PU foam will be 430 x 480 x 80 mm. having density of 45+ 5 kg/m3 & dully upholestered with foam lamination fabric cover. All bolts to be recieved by dash nuts CNC milled threated and nailed of size 20 x 10 mm. > Option- 1) ABS Semi-Gloss full back shell.2) Designer perforated laminated Seat Panel. foam laminated fabric to cover all metal parts. Fabric > 100% stretch fabric available in various colours, to be fused with 3 mm foam, wherever quilting is required (Make Penworkers) |
| 95 | Installation and Commissioning including of all accessories. |
| 96 | F. Lighting Illumination, Step Lights & Exit Signage:-Supply and Installation of 22W 4000K LED COB Lights. (Make:- Phillips/ Syska) |
| 97 | Supply and Installation of LED Profile Light 75MM Width and Length 1800MM having High quality LED Strip Light of 33W per Mtr including Driver. |
| 98 | Supply and Installation of LED Profile Cove lighting & LED Strip (Color Tempearatue:- 300K & 4000K), Profile Size: Height:- 6MM, Width:- 17MM including LED Driver having power 5W - 10W. |
| 99 | Supply and Installation of \\"Central Institue of Technology Auditorium\\" LED Signage of appropriate size on the horizontal part of proscenium. |
| 100 | Supply and Installation of 2 Watt LED pathway Lights to be fixed on chairs. |
| 101 | Supply aand Installation of LED Exit Signage |
| 102 | Supply and Laying of 1.5 Sqmm Electrical Wire. |
| 103 | Supply and Laying of 1 Sqmm Electrical Wire. |
| 104 | Supply and Laying of 25MM PVC Conduits(Make:- AKG/ Berlia) |
| 105 | Supply and Installation of DP, MCB and other electrical accessories.(Make:- Havells/ Anchor) Please Enable Macros to View BoQ information |
