|
| 1 | Construction of main gate & Security cabin |
| 2 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 4 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.All kinds of soil |
| 5 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 6 | Treatment of soil under plinth filling using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with sand filling:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration |
| 7 | Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge. Note : 1) Excess/less cement used than specified in this item is payable/ recoverable separately.All works upto plinth level :M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) |
| 8 | Centering shuttering including struttings, propping etc. and removal of form work for: |
| 9 | Foundations, footings, bases for columns etc. for mass concrete with steel formwork |
| 10 | Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply |
| 11 | Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply |
| 12 | Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply |
| 13 | Providing and laying in position ready mixed concrete manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of RMC from transit mixer to site of laying but excluding the cost of centring, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per the direction of Engineer-in-Charge. (Note :- Cement content considered in this item is @ 418 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). |
| 14 | Reinforced cement concrete grade M-25 using 418 kg of cement per cum.All works upto plinth level |
| 15 | Reinforced cement concrete grade M-25 using 418 kg of cement per cum.All works upto Floor five level |
| 16 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 17 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 18 | First class brick work in foundation and plinth including cost of all materials as required complete:-In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 19 | First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:-In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 20 | Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required:-In grating, frames, guard bar, railing, brackets, gates and similar works, all complete. |
| 21 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position :Sal Wood |
| 22 | Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement : |
| 23 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veeners on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 24 | Extra for Providing and fixing flush doors with decorative veneering |
| 25 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). |
| 26 | Providing and fixing bright finished brass towerbolts (barrel type)with necessary screws etc. complete : |
| 27 | 250 x 10 mm |
| 28 | 150x10 mm |
| 29 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 30 | 12 mm cement plaster of mix:Cement mortar 1:4 (1 cement : 4 fine sand) |
| 31 | 15 mm cement plaster on the rough side of single or half brick wall of mix::Cement mortar 1:4 (1 cement : 4 fine sand) |
| 32 | 6 mm cement plaster of mix ::Cement mortar 1:4 (1 cement : 4 fine sand) |
| 33 | Neat cement punning |
| 34 | Providing and placing rapid gravity filter sand having effective size of 0.50 mm to 1.00 mm & uniformity coefficient of not more than 1.70 and or less than 1.30 obtained from Barakar river West Bengal as per specification and the direction of the Engineer - in - charge. |
| 35 | Providing and placing filter gravel having effective size of 3.00 mm to 25 mm & uniformity co-efficient of not more than 1.70 and or less than 1.30 obtained from Barakar river, West Bengal as per specification and the direction of the Engineer - in-charge. |
| 36 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: |
| 37 | Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required:-In grating, frames, guard bar, railing, brackets, gates and similar works, all complete. |
| 38 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 39 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 grams/ litre, of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :New work ( two or more coats) over and including water thinnable priming coat with cement primer. |
| 40 | Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :New work ( two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 41 | Applying priming coat [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :With ready mixed Pink or Grey primer of approved brand and manufacture on wood work ( hard & soft wood ). |
| 42 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]:Two or more coats on new work |
| 43 | Providing and laying 1st class quality vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 - 2017, of approved make, in all colours and shades, laid over 20mm thick cement mortar 1:4 (1 cement : 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. all complete as per direction of the Engineer-in-charge..Soluble Salt Stainfree vitrified tiles (Glossy)Size of tile 600 mm x 600 mm |
| 44 | Providing and fixing on wall face unplasticised Rigid PVC rain water, soil, waste & vent pipes (working pressure 4 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:Single socketed pipe - 100 mm OD |
| 45 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water, soil, waste & vent pipes pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:Single pushfit Coupler |
| 46 | 110 mm |
| 47 | Bend 87.5° |
| 48 | 110 mm |
| 49 | Plain shoe |
| 50 | 110 mm |
| 51 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water, soil, waste & vent pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete.110 mm |
| 52 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling and dash fasteners to be paid for separately) :- |
| 53 | For fixed portion of approved quality:-Polyester powder coated aluminium ( minimum thickness of polyester powder coating of 50 micron ). |
| 54 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing fittings wherever required including the cost of EPDM rubber / neoprene gasket required ( Fittings shall be paid for separately ):-Polyester powder coated aluminium ( minimum thickness of polyester powder coating of 50 micron ). |
| 55 | Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid in basic item) :-With float glass panes of 8 mm thickness ( weight not less than 20 kg / sqm ) |
| 56 | Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 fine sand) mixed with 2% integral water proofing compound laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 fine sand) and finished neat etc. complete as per direction of Engineer-in-charge. |
| 57 | Supplying & installation of 400 mm sweep AC wall mounting fan with plastic blade including connection etc as required:- |
| 58 | Supplying and fixing of the following PVC conduit (medium gauge) with all accessories on slab/recessed on wall etc as reqd. |
| 59 | 19/20 mm dia |
| 60 | 25 mm dia |
| 61 | Wiring for circuit /Sub-main with following sizes PVC insulated copper conductor cable (FR) in PVC casing and capping etc. as required. |
| 62 | 2 x 1.5 Sq.mm |
| 63 | 2 x 2.5 Sq.mm |
| 64 | Supplying and fixing of the following sizes modular type cover plates for GI/plastic modular switch boards etc. as required. |
| 65 | 3 module :- |
| 66 | 4 module :- |
| 67 | Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required. |
| 68 | 3 module plastic switch board:- |
| 69 | 4 module plastic switch board:- |
| 70 | Surface mounted round/Square shaped 18/20 watt LED downlight with integral driver and high quality polycarbonate diffuser:- |
| 71 | Construction of Boundary wall |
| 72 | Clearing jungle including uprooting of rank vegetation,grass, brush wood, trees and saplings of girth upto 30 cmmeasured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 73 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 mAll kinds of soil |
| 74 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. All kinds of soil |
| 75 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All Work upto Plinth Level1:3:6 ( 1 Cement: 3 fine sand : 6 graded stoneaggregate 20 mm nominal size) |
| 76 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone aggregate 20 mm nominal size) |
| 77 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone aggregate 20 mm nominal size) |
| 78 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement- 1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone aggregate 20 mm nominal size) |
| 79 | Centering, Shuttering including struttings, propping etc and removal of form work for: |
| 80 | Foundations, footings, bases for columns etc. for mass concrete with steel formwork |
| 81 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. using shuttering ply |
| 82 | Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply |
| 83 | Lintel beams, plinth beams, girders, bressumers & cantilevers with 12 mm shuttering ply |
| 84 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 85 | First class brick work in foundation and plinth including cost of all materials as required complete:-In cement mortar 1:4 ( 1 cement : 4 fine sand )-Above Plinth |
| 86 | Providing structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required. |
| 87 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) |
| 88 | 15 mm cement plaster on the rough side of single or half brick wall of mix::Cement mortar 1:5 (1 cement : 5 fine sand) |
| 89 | Finishing walls with textured exterior paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :New work ( two or more coats applied @ 3.28 litre/10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm |
| 90 | Industrial safety & security System |
| 91 | Supply, fixing and comissioning of IP Fixed Verifocal Outdoor Camera with Lens, Housing & Mounting arrangement including labour charges etc complete |
| 92 | Supply, fixing and comissioning of IP PTZ Camera with mounting arrangement including labour charges etc complete |
| 93 | Supply, fixing and comissioning of Dome Camera with mounting arrangement including labour charges etc complete |
| 94 | Supply and fixing of CCTV Camera Primary Recording Server including labour charges etc complete |
| 95 | Supply and fixing of CCTV Camera Management Server including labour charges etc complete |
| 96 | Supply and fixing of NMS Server including labour charges etc complete |
| 97 | Supply and fixing of NAS Storage 400TB including labour charges etc complete |
| 98 | Supply and fixing of 55\\" LED display with stand (for Video Wall 4x3 Matrix) with required connectors including labour charges etc complete |
| 99 | Supply and fixing of 55\\" LED wall mount bracket 4x3 Matrix with required connectors including labour charges etc complete |
| 100 | Supply and fixing of Video Wall Controller with required connectors including labour charges etc complete |
| 101 | Supply and fixing of Full HD KVM Matrix switch with all connectors/accessories, provision for connecting 11 nos. of servers and 4/5 nos. of workstation including labour charges etc complete |
| 102 | Supply, fixing and comissioning of Workstation, Monitor with genuine windows license including labour charges etc complete |
| 103 | Supply and Installation of Video Management Software(VMS) with 10years license validity for 350 Devices including labour charges etc complete. |
| 104 | Supply and Installation of License Plate Recognition with 10years license validity including labour charges etc complete. |
| 105 | Supply and Installation of Speed Violation Detection with 10years license validity including labour charges etc complete. |
| 106 | Supply and Installation of Network Management System (NMS) for 350 Device including labour charges etc complete. |
| 107 | Supply and installation of MS Office Software including labour charges etc complete |
| 108 | Supply and installation of Antivirous Software including labour charges etc complete |
| 109 | Supply and installation of A4 size Wi-Fi Duplex All-in-One Ink Tank Printer with ADF (Print, Scan and Copy), resolution: 1200X2400 dp including labour charges etc complete |
| 110 | Supply and fixing of Firewall Next Gen with IPS including labour charges etc complete. |
| 111 | Supply and fixing of Firewall Unified Threat Protection (UTP) (24x7 Application Control, IPS, AMP, Web Filtering and Antispam Service) including labour charges etc complete. |
| 112 | Supply and fixing of ACS Controller including labour charges etc complete. |
| 113 | Supply and fixing of Biometric Reader including labour charges etc complete. |
| 114 | Supply and fixing of EM Locks, DP Switchs, Push Button, BGU including labour charges etc complete. |
| 115 | Supply and installation of Access Control Software including labour charges etc complete |
| 116 | Supply, fixing and comissioning of 48 Port Managed L3 switch with SFP Module including all accessories and labour charges etc complete |
| 117 | Supply and fixing of 24 Port Managed L2 switch including labour charges etc complete |
| 118 | Supply, fixing and comissioning of 8 Port Industrial Grade Managed switches with SFP Module including labour charges etc complete. |
| 119 | Supply, Installation, & Testing of 19\\" 1U Rack Mounted/ surface mounted aluminum/ CRCA 1.2mm powder coated, Singlemode glass Fiber Optic Cable 24 Port Patch panel/LIU loaded with flangless/screwable duplex adapters for ST/E-2000/SC/LC/MT-RJ/PC type, It should have easy removable Top plate with push buttons, there should be a splice tray installed in the Patch panel/LIU which can handle the fiber cores, splice tray should be PC+ABS material, it should include accessories like mounting hardware, gormetts, heat shrink tubes/sleevs, screws, nuts to install the panel for rack/wallmount applications as per requirment complete in all respect. |
| 120 | Supply of LC-LC Single Mode Patch chord length 1/1.5 Mtr |
| 121 | Supply of LC-LC Single Mode Patch chord length 3.0 Mtr |
| 122 | Supply of CAT6A Patch chord length 5.0 Mtr |
| 123 | Supply and fixing of Industrial Grade Switch Mode Power Supply 48V/5A for CCTV camera JB including labour charges etc complete |
| 124 | Supply and drawing of 12 Core OFC Industrial Armoured cable laid in HDPE pipe/raceways (for CCTV network) including labour charges etc complete. |
| 125 | Fusion Splicing of Fiber Singlemode Pigtail (9/125 µm) made of glass fiber optic, should be fitted at one end with any one type of single ST/E-2000/SC/LC/MT-RJ/PC type connector in acc. with IEC 61754-20, as per latest ammendments of TIA/EIA 569 Standard Specification as per requirments complete in all respect. |
| 126 | Supply and laying of LAN cable CAT 6A FTP outdoor cable laid in existing pipe/raceways including labour charges etc complete. |
| 127 | Supply and fixing of 42U Server Rack for CCTV equipment including all accessories and labour charges etc complete |
| 128 | Supply and fixing of Junction Box for CCTV equipment including labour charges etc complete |
| 129 | Construction of JB foundation 700mm x 700mm x 400mm |
| 130 | Point to Point network anteena to connect remote 3 industrial estates |
| 131 | Anteena Structure |
| 132 | Providing, installation, testing and commissioning of 1KVA ONLINE UPS SYSTEM, Single Phase 230 V, 50 Hz with 2 hour backup SMF battery bank as per specification |
| 133 | Providing, installation, testing and commissioning of 15KVA ONLINE UPS SYSTEM, 3 Phase 415 V, 50 Hz with 2 hour backup SMF battery bank as per specification |
| 134 | Supply and erection of M.S. Galvanized 7 Mtr Octagonal pole ( as per BSEN 40-3-3:2003 /BSEN 10025/IS 2062 IS:875 Part-1 – 2015/ for MS plate for base flange )of 7 mtr length and dimension as per table P-01 with base plate on the cement concrete foundation of M-20 grade (1:1.5:3) as per IS 456/IS 2911. with the help of anchor bolts of grade 6.8 (IS: 1367 P III ). The pole shall have a weatherproof flush door and locking arrangements. complete in all respect. Octagonal MS Poles made of S-355JO grade steel sheet , folded lengthwise to obtained Octagonal shape, having single longitudinal seam weld and hot dipped galvanised internally & externally in accordance with IS 2629. |
| 135 | Supply, Erection and Fixing of hot dipped galvanised M.S. Cantiliver over the existing poles. |
| 136 | Construction of Pole foundation 500mm x 500mm x 1500mm for 7M camera pole |
| 137 | Supply and erection of M.S. Galvanized 10 Mtr Octagonal pole ( as per BSEN 40-3-3:2003 /BSEN 10025/IS 2062 IS:875 Part-1 – 2015/ for MS plate for base flange )of 10 mtr length and dimension as per table P-01 with base plate on the cement concrete foundation of M-20 grade (1:1.5:3) as per IS 456/IS 2911. with the help of anchor bolts of grade 6.8 (IS: 1367 P III ). The pole shall have a weatherproof flush door and locking arrangements. complete in all respect. Octagonal MS Poles made of S-355JO grade steel sheet , folded lengthwise to obtained Octagonal shape, having single longitudinal seam weld and hot dipped galvanised internally & externally in accordance with IS 2629. |
| 138 | Supply, Erection and Fixing of hot dipped galvanised M.S. Cap over the existing poles. |
| 139 | Construction of Pole foundation 500mm x 500mm x 1700mm for 10M camera pole |
| 140 | Supply and laying of 3x2.5sqmm FRLS PVC insulated armoured copper wire with suitable FRLS PVC insulated armoured copper wire for run of circuits including labour charges etc.., complete |
| 141 | Providing, lowering, laying, aligning, fixing in position at and jointing at all level/ depths ISI marked 75mm HDPE pipes of PE-100 grade & PN-6 as per IS 4984 (amended upto date) in trenches in complete including all material, labour, testing and commissioning as per Technical Specifications. |
| 142 | Supply and fixing 25mm sizes (dia.) of ISI marked ( IS:9537 P - II ) rigid steel conduit of apropriate thickness related to its dia as per PWD specification for electrical Works along with accessories in recessed using saddles, clamps, fasteners, pvc bushes, check nuts, screwas etc. as required including cutting the wall and making good the same as required |
| 143 | Earthing with copper earth plate 600mm X 600mm X 3mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7mtr long etc with charcoal/coke and salt as required. |
| 144 | Supply & Laying 20mm x 3mm earth strip in horizontal or vertical run in ground/ surface/ recess including riveting, soldering, saddles, Jointing shall be done by overlapping and with 2 set of GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required. |
| 145 | Supply , Installation, Testing and Commissioning of ISO certified company made Air Cooled Hi Wall split type Air conditioners 1.5 TR with 3 star rating of BEE (ISEER not less then 3.5 ) amended upto date complete with Indoor unit(IDU), Outdoor unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU), R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. Min 5-year OEM warranty both compressor and PCB. NABL accredited as per IS/ISO/IEC 17025 standards / CPRI/ERDA lab testing reports as per IS 1391(Part-2) 2018 with OEM certificate. |
| 146 | Supply , Installation, Testing and Comissioning of ISO certified company made Air Cooled Cassette type 1.5 Ton Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), R-32/R410A/ R-407 Green Refrigerant, wireless Remote, inbuilt drain pump, suitable for 400/230V, 50 Hz ,1 /3 phase AC supply, apable of performing cooling, dehumidification, Air circulation, filteration & ventilation of following capacity with Scroll / reciprocating / rotary compressor with min 5 year OEM warranty both compressor and PCB as specified. NABL accredeated as per IS/ISO/IEC 17025 standards/ CPRI/ ERDA lab testing reports as per IS 1391 with OEM certificate |
| 147 | Supply and fixing of industrial grade Control Room Desk (H x W x D = 750mm X 4055mm X 1030mm) - as per design enclosed offering Workstation Desk with provision of placing 5 Nos. of 24\\" monitor on Monitor Mounts, 5 Nos. of keyboard/Mouse on Table Top. Extruded Aluminium Profile structure (Powder Coated) with MS based Top/Bottom Frame and Foot. Laminated 25mm (±2mm) MDF Board Side Panels (Fixed side panels), Laminated 18mm (±2mm) MDF Board Front & Back Shutter (Openable Front & Back Shutter through Lock & Knob). Table Top in Laminated 25mm (±2mm) MDF Board with Nosing. For routing LAN & Power Cables within the Desk. Power Distribution Sockets - within the Desk for Powering of Active Devices. Adequate Heat management provision for Exhaust of heat from within the Desk Assembly. Adequate space for CPUs & Other equipment's placed with in the Desk. |
| 148 | Supply and fixing of industrial grade Supervisor Table (H x W x D = 750mm X 1200mm X 1030mm) - as per design enclosed offering Workstation Desk with provision of placing 5 Nos. of 24\\" monitor on Monitor Mounts, 5 Nos. of keyboard/Mouse on Table Top. Extruded Aluminium Profile structure (Powder Coated) with MS based Top/Bottom Frame and Foot. Laminated 25mm (±2mm) MDF Board Side Panels (Fixed side panels), Laminated 18mm (±2mm) MDF Board Front & Back Shutter (Openable Front & Back Shutter through Lock & Knob). Table Top in Laminated 25mm (±2mm) MDF Board with Nosing. For routing LAN & Power Cables within the Desk. Power Distribution Sockets - within the Desk for Powering of Active Devices. Adequate Heat management provision for Exhaust of heat from within the Desk Assembly. Adequate space for CPUs & Other equipment's placed with in the Desk. |
| 149 | Medium Back Chair with Adjustable P.U Arms. Nylon Base, Gas Lift. Seat & Back Net Tapestry, Swivel tilt. |
| 150 | Supply, Installation, Testing and Comissioning of Silent 50KVA DG Set air cooled & naturally aspirated (with Axial Flow Fan) as per latest CPCB emission norms and specifications. |
| 151 | Two loops control panel having CPU with 640character display including backlite LCD display qwerty programming and operating manuals complete required. |
| 152 | Add Extra for per Loop expansion beyond Two Loop |
| 153 | Intelligent photothermal detector with Isolator Base |
| 154 | Intelligent addressable thermal detector with Isolator Base |
| 155 | Addressable Fire Control module |
| 156 | Response Indicator |
| 157 | Sounder |
| 158 | Addressable Call Point |
| 159 | Supply and laying of 1/2 runs of the following FRLS PVC insulated armoured copper wire with suitable FRLS PVC insulated armoured copper wire for run of circuits including labour charges etc.., complete |
| 160 | 3x2.5 Sq.mm |
| 161 | 2x1.5 Sq.mm (Red) |
| 162 | Emergency Industrial Seiren 5Km range, Horizontal/vertical Double Mounting Single Phase 200/250V, 2800 RPM 50 C/s AC with operating button. |
| 163 | Supply , Installation, Testing and Commissioning of Ethernet Control Module LAN WAN Network WEB Server RJ45 Port+8Channel Relay including labour charges etc.., complete |
| 164 | Supply and fixing of DCP-ABC stored pressure squeeze grip type fire extinguishers, 6 kg capacity, IS:15683 : 2006, filled with ABC Mono Ammonium Phosphate base powder-90 complete with discharge hose and wall mounting bracket, 2mm Mild Steel, EPDM Rubbers, Pressure Guage, which work effectively on all class of fires (A, B, C & Electrical fires) with 5 years warranty Including transportation, all taxes and all labour charges etc complete. |
| 165 | Supply and fixing of ABC stored pressure squeeze grip type fire extinguishers, 6 kg capacity, IS:15683 : 2006, filled with ABC Mono Ammonium Phosphate base powder-90 complete with discharge hose and wall mounting bracket, 2mm Mild Steel, EPDM Rubbers, Pressure Guage, which work effectively |
| 166 | Supply and fixing of CO2 type Fire Extinguishers 4.5 Kg capacity confirming to IS 2878 made from ISI marked steam less cylinder confirming to IS:7285 & CE certified and fitted with ISI marked controlled valve confirming to IS:3224, high pressure 1 Mtr discharge hose & horn complete with initial gas charged with carrying handle with wheels and wall mounting bracket. Squeeze lever discharge, used un-used indicator, Aphoxy coated paint (Red) with 93% gloss with 2 years warranty Including transportation, all taxes and all labour charges etc complete. |
| 167 | Retro reflective vinyl board with 3mm ACP-board and gloss Lamination, Road safety signage's For boom barrier \\"200 X 200 mm with (1pcs Clamp 50 dia)\\" |
| 168 | Retro reflective vinyl board with 3mm ACP-board and gloss Lamination, Road safety signage's Car \\"2 ft X 2 ft with (1pcs Clamp 50 dia) |
| 169 | Retro reflective vinyl board with 3mm ACP-board and gloss Lamination, Road safety signage's Bike \\"2 ft X 2 ft with (1pcs Clamp 50 dia)\\" |
| 170 | Retro reflective vinyl board with 3mm ACP-board and gloss Lamination, Road safety signage's Walk \\"2 ft X 2 ft with (1pcs Clamp 50 dia)\\" |
| 171 | Retro reflective vinyl board with 3mm ACP-board and gloss Lamination, Road safety signage's Security Check \\"1.5 X 2 ft with (1pcs Clamp 50 dia)\\" |
| 172 | Retro reflective vinyl board with 3mm ACP-board and gloss Lamination, Road safety signage's caution \\"200 X 200 mm with (1pcs Clamp 50 dia)\\" |
| 173 | Retro reflective vinyl board with 3mm ACP-board and gloss Lamination, Road safety signage's U-turn \\"200 X 200 mm with (1pcs Clamp 50 dia)\\" |
| 174 | Retro reflective vinyl board with 3mm ACP-board and gloss Lamination, Road safety signage's No Parking \\"200 X 200 mm with (1pcs Clamp 50 dia)\\" |
| 175 | Retro reflective vinyl board with 3mm ACP-board and gloss Lamination, Fire Exit \\"12\\" X 6\\" with (1pcs Clamp 50 dia)\\" |
| 176 | Retro reflective vinyl board with 3mm ACP-board and gloss Lamination, Fire Extinguishers \\"200 X 200 mm with (1pcs Clamp 50 dia)\\" |
| 177 | Retro reflective vinyl board with 3mm ACP-board and gloss Lamination, Electrical signage's Danger \\"200 X 200 mm with (1pcs Clamp 50 dia)\\" |
| 178 | Retro reflective vinyl board with 3mm ACP-board and gloss Lamination, Electrical signage's High Voltage \\"200 X 200 mm with (1pcs Clamp 50 dia)\\" |
| 179 | Retro reflective vinyl board with 3mm ACP-board and gloss Lamination, Road safety signage's STOP \\"200 X 200 mm with (1pcs Clamp 50 dia)\\" |
| 180 | PVC Chain 8mm dia \\"Swift 1013 Plastic chain (for interconnecting traffic cones)\\" |
| 181 | Post Flexible \\" Color Orange Height 750mm Dia 80mm Base 200 mm Sleeve 3x3 inch Weight 1 kg approx Material PU Flexible Including necessary nails/bolt epoxy etc.\\" |
| 182 | Environment Management cost |
| 183 | Testing of environmental parameter (Ambient Air Quality) within IE through NABET Accredited Laboratory. Monitoring locations shall cover all active construction sites, workforce camp site, material stack yard for Construction phase-24 months of 2 locations, once a quarter (12 samples) of two sector/Component |
| 184 | Testing of environmental parameter (Water Quality) within IE through NABET Accredited Laboratory. Monitoring locations shall cover all active construction sites, workforce camp site, material stack yard for Construction phase-24 months of 2 locations, once a quarter (12 samples) of two sector/Component |
| 185 | Testing of environmental parameter (Ambient Noise Level) within IE through NABET Accredited Laboratory. Monitoring locations shall cover all active construction sites, workforce camp site, material stack yard for Construction phase-24 months of 2 locations, once a quarter (12 samples) of two sector/Component |
| 186 | Testing of environmental parameter (Soil Quality) within IE through NABET Accredited Laboratory. Monitoring locations shall cover all active construction sites, workforce camp site, material stack yard for Construction phase-24 months of 2 locations, once a quarter (12 samples) of two sector/Component |
| 187 | Testing of environmental parameter (Ambient Air Quality) within IE through NABET Accredited Laboratory. Monitoring locations shall cover all active construction sites, workforce camp site, material stack yard for Maintenance/ DLP phase- 60 months of 1 location, once in 6 months (10 samples) of four sector/Component of two sector/Component |
| 188 | Testing of environmental parameter (Water Quality) within IE through NABET Accredited Laboratory. Monitoring locations shall cover all active construction sites, workforce camp site, material stack yard for Maintenance/ DLP phase- 60 months of 1 location, once in 6 months (10 samples) of two sector/Component |
| 189 | Testing of environmental parameter (Ambient Noise Level) within IE through NABET Accredited Laboratory. Monitoring locations shall cover all active construction sites, workforce camp site, material stack yard for Maintenance/ DLP phase- 60 months of 1 location, once in 6 months (10 samples) of two sector/Component |
| 190 | Testing of environmental parameter (Soil Quality) within IE through NABET Accredited Laboratory. Monitoring locations shall cover all active construction sites, workforce camp site, material stack yard for Maintenance/ DLP phase- 60 months of 1 location, once in 6 months (10 samples) of two sector/Component |
| 191 | Operation & maintaince Cost |
| 192 | 1st Year |
| 193 | 2nd Year |
| 194 | 3rd Year |
| 195 | 4th Year |
| 196 | 5th Year Please Enable Macros to View BoQ information |
