|
| 1 | Providing, Installation and Commissioning of 5 passenger (340 kg) capacity lift serving up to G+3 level as per direction of the Engineer in charge and as per following specification:Type of Lift : Gearless machine in machine room located directly above lift well. Load : 5 passenger (340 kg),Speed : 1 m/s, No. of floor : 4 (Ground + 03 Floor), No. of opening : 4, Drive : AC VVVF Closed Loop drive,Operation: Simplex collective selective with/ without attendant, Power : AC 3 Phase, 50 Hz, 415 Volts ±10%,Construction, Design and finish of the car : Stainless steel ACO, SS hairline suspended ceiling with square light, IRS, SS handrail on rear side. General Requirement:a) Provision for locking control in automatic or attendant position, b) Provision of over load and audio visual indicator, c) Provision for call register signal and VVVF Door Operator, d) Provision of Battery operated emergency light for 30 min backup and Alarm Bell, e) Infra red screen electric operation door enclose, f) 3 Way Intercom connection to telephone exchange (1+2), g) Fireman switch, h) Provision for PVC floor, i) Automatic Rescue Device and also with Mechanical rescue device (manually rescue in case of ARD failure) j) Provision of dot matrix display in car in all landings, k) Stainless steel Braille button with S.S. cover. l) Floor Announcement with Music. m) Pit Ladder, n). Scaffolding for fitting fixing, o). SS Handrail, p). Minor Building work (MS structure or Concrete structure at Pit of the lift well for installation of buffer spring of lift, q). Full Car Operating panel, r.) False ceiling in Car, s).Free Service for 01(One) year including repair or replacement of all defective parts if any. t.) necessary all holes at entrance door wall (front brick wall) and at other wall of lift shaft as per necessary for installation and electrical purpose. u) Cleaning of Pit etc. v) provision for physically handicapped. w) Automatic Phase reversal device. Indicated sizes for the lift: Available hoist way size: 1900 mm (Depth) x 1600 (Width) mm,Pit Depth : 1600mm, Entrance : 700 mm wide x 2000 mm high (minimum). |
| 2 | Providing, Installation and Commissioning of 5 passenger (340 kg) capacity Machine Room Less (MRL) lift serving up to G+3 level as per direction of the Engineer in charge and as per following specification: Type of Lift : Machine Room Less (MRL), Gearless machine located in the overheadLoad : 5 passenger (340 kg),Speed : 1 m/s, No. of floor : 4 (Ground + 03 Floor), No. of opening : 4, Drive : AC VVVF Closed Loop drive,Operation: Simplex collective selective with/ without attendant, Power : AC 3 Phase, 50 Hz, 415 Volts +- 10%,Construction, Design and finish of the car : Stainless steel ACO, SS hairline suspended ceiling with square light, IRS, SS handrail on rear side. General Requirement:a) Provision for locking control in automatic or attendant position, b) Provision of over load and audio visual indicator, c) Provision for call register signal and VVVF Door Operator, d) Provision of Battery operated emergency light for 30 min backup and Alarm Bell, e) Infra red screen electric operation door enclose, f) 3 Way Intercom connection to telephone exchange (1+2), g) Fireman switch, h) Provision for PVC floor, i) Automatic Rescue Device and also with Mechanical rescue device (manually rescue in case of ARD failure) j) Provision of dot matrix display in car in all landings, k) Stainless steel Braille button with S.S. cover. l) Floor Announcement with Music. m) Pit Ladder, n). Scaffolding for fitting fixing, o). SS Handrail, p). Minor Building work (MS structure or Concrete structure at Pit of the lift well for installation of buffer spring of lift, q). Full Car Operating panel, r.) False ceiling in Car, s).Free Service for 01(One) year including repair or replacement of all defective parts if any. t.) necessary all holes at entrance door wall (front brick wall) and at other wall of lift shaft as per necessary for installation and electrical purpose. u) Cleaning of Pit etc. v) provision for physically handicapped. w) Automatic Phase reversal device. Indicated sizes for the lift: Available hoist way size: 1600 mm (Depth) x 1850 (Width) mm,Pit Depth : 1600mm, Entrance : 700 mm wide x 2000 mm high (minimum). |
| 3 | Providing, Installation and Commissioning of 13 passenger (884 kg) capacity lift serving up to G+3 level as per direction of the Engineer in charge and as per following specification: Type of Lift : Gearless machine in machine room located directly above lift well. Load : 13 passenger (884 kg),Speed : 1 m/s, No. of floor : 4 (Ground + 03 Floor), No. of opening : 4, Drive : AC VVVF Closed Loop drive,Operation: Simplex collective selective with/ without attendant, Power : AC 3 Phase, 50 Hz, 415 Volts +- 10%,Construction, Design and finish of the car : Stainless steel ACO, SS hairline suspended ceiling with square light, IRS, SS handrail on rear side. General Requirement:a) Provision for locking control in automatic or attendant position, b) Provision of over load and audio visual indicator, c) Provision for call register signal and VVVF Door Operator, d) Provision of Battery operated emergency light for 30 min backup and Alarm Bell, e) Infra red screen electric operation door enclose, f) 3 Way Intercom connection to telephone exchange (1+2), g) Fireman switch, h) Provision for PVC floor, i) Automatic Rescue Device and also with Mechanical rescue device (manually rescue in case of ARD failure) j) Provision of dot matrix display in car in all landings, k) Stainless steel Braille button with S.S. cover. l) Floor Announcement with Music. m) Pit Ladder, n). Scaffolding for fitting fixing, o). SS Handrail, p). Minor Building work (MS structure or Concrete structure at Pit of the lift well for installation of buffer spring of lift, q). Full Car Operating pannel, r.) False ceiling in Car, s).Free Service for 01(One) year including repair or replacement of all defective parts if any. t.) necessary all holes at entrance door wall (front brick wall) and at other wall of lift shaft as per necessary for installation and electrical purpose. u) Cleaning of Pit etc. v) provision for physically handicapped. w) Automatic Phase reversal device. Indicated sizes for the lift: Available hoist way size: 2895 mm (Depth) x 1925 (Width) mm,Pit Depth : 1600mm, Entrance : 900 mm wide x 2000 mm high (minimum). |
| 4 | Providing fitting fixing of Lighting arrangement with protective measure in/c providing single phase main MCB point at lift well, 3 pin socket & light point with switch in each floor & pit of the Lift shaft and the Electrical wiring should be provided with earthing through PVC casing or pipe etc. complete as per direction of the Engineer in charge. |
| 5 | Comprehensive Annual Maintenance Contract for period of 5 (five) years after completion of 1 (one) year warranty (Defects and Liabilities) period including replacement of all batteries, lights ,fans, any kind of major /minor spare parts of 5 passenger (340 kg) capacity lift complete as per direction of the Engineer In Charge. |
| 6 | Comprehensive Annual Maintenance Contract for 1st year after completion of 1 (one) year warranty (Defects and Liabilities) period. |
| 7 | Comprehensive Annual Maintenance Contract for 2nd year after completion of 1st year CAMC period. |
| 8 | Comprehensive Annual Maintenance Contract for 3rd year after completion of 2nd year CAMC period. |
| 9 | Comprehensive Annual Maintenance Contract for 4th year after completion of 3rd year CAMC period. |
| 10 | Comprehensive Annual Maintenance Contract for 5th year after completion of 4th year CAMC period. |
| 11 | Comprehensive Annual Maintenance Contract for period of 5 (five) years after completion of 1 (one) year warranty (Defects and Liabilities) period including replacement of all batteries, lights ,fans, any kind of major /minor spare parts of 5 passenger (340 kg) capacity MRL lift complete as per direction of the Engineer In Charge. |
| 12 | Comprehensive Annual Maintenance Contract for 1st year after completion of 1 (one) year warranty (Defects and Liabilities) period. |
| 13 | Comprehensive Annual Maintenance Contract for 2nd year after completion of 1st year CAMC period. |
| 14 | Comprehensive Annual Maintenance Contract for 3rd year after completion of 2nd year CAMC period. |
| 15 | Comprehensive Annual Maintenance Contract for 4th year after completion of 3rd year CAMC period. |
| 16 | Comprehensive Annual Maintenance Contract for 5th year after completion of 4th year CAMC period. |
| 17 | Comprehensive Annual Maintenance Contract for period of 5 (five) years after completion of 1 (one) year warranty (Defects and Liabilities) period including replacement of all batteries, lights ,fans, any kind of major /minor spare parts of 13 passenger (884 kg) capacity lift complete as per direction of the Engineer In Charge. |
| 18 | Comprehensive Annual Maintenance Contract for 1st year after completion of 1 (one) year warranty (Defects and Liabilities) period. |
| 19 | Comprehensive Annual Maintenance Contract for 2nd year after completion of 1st year CAMC period. |
| 20 | Comprehensive Annual Maintenance Contract for 3rd year after completion of 2nd year CAMC period. |
| 21 | Comprehensive Annual Maintenance Contract for 4th year after completion of 3rd year CAMC period. |
| 22 | Comprehensive Annual Maintenance Contract for 5th year after completion of 4th year CAMC period. Please Enable Macros to View BoQ information |
