|
| 1 | CIVIL WORK |
| 2 | Earth work excavation for foundation in all classes of soils and sub-soils and to full depth as may be directed except in hard rock requiring blasting including initial leads and lifts and refilling the sides of foundation with excavated earth in 150 mm layers well watered, rammed and consolidated including depositing surplus earth within the godown or inside compound in places shown with initial lead of 10 mts and initial lift of 2 mts. Clearing, leveling the site, shoring, strutting, bailing of water wherever necessary etc., complete complying with standard specification and as directed |
| 3 | CEMENT CONCRETE 1:5:10(one cement, five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including mixing by mechanical means de-watering side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed by the departmental officers. |
| 4 | Supplying and filling in foundation with Gravel in layers of not exceeding 150mm thick well watered, rammed and consolidated including watering etc., complete complying with standard specification and as directed. |
| 5 | Providing and laying in position, Standardised Concrete Mix M20 Grade in accordance with IS:456-200 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/M3 and mazimum water cement ratio of 0.55, including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improvement workability without impairing strength and durability with about (5 Cu.m) 7730 Kg of 20mm machine crushed stone jelly and with about (3.3 Cum)5156 kg of 0-12mm machine crushed stone jelly and with about (4.7 Cum) 7670 kg of sand, but excluding cost of reinforcement gril and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, cutting etc., and Providing fixtures like fan clams in the RCC floor/ roof slabs wherever necessary without claiming extra etc., complete complying with standard specification and as directed the departmental officers. The coarse and five aggregates to be used should comply with the requirements of 15 Standards. (No separate payment will be made by the Department for the excess usage of materials.In foundation and basement. |
| 6 | In Ground floor upto 4.50M height above basement. |
| 7 | In First Floor . |
| 8 | In Second floor |
| 9 | Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C.works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed. |
| 10 | Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild steel sheets of size 90cm x60cm 10gauge stiffened with welded mild steel angles of size 25mm x 25mm x 3mm laid with country wood joist of average of size 10cm x 6.50cm at about 90cm centers with casuarinas props of 13cm dia at 75cm centre to centre with all nails coir, wedges complete and removing the form work after necessary curing period as directed by the corporation officers. The rates should inclusive of cutting, bending, welding charges of M.S.sheets; M.S. angles etc complete complying with standard specification and as directed.Column footing, Column pedestal, Plinth beam, Grade beam etc., |
| 11 | Beam, slab, lintel, bed block etc., |
| 12 | Rectangular or square Column |
| 13 | BRICK WORK in cement mortor 1:5(one cement, five sand) using best quality stock bricks of size 9” x4 3/8” x 2 ¾” for walls including cost of scaffolding curing, finishing etc., complete complying with standard specification and as directed by the departmental officers.In foundation and basement. |
| 14 | In Ground floor upto 4.50M height above basement |
| 15 | In First floor |
| 16 | In Second floor |
| 17 | Water proof chemical coating with fibre glass mesh reinforcement for the Sunken slabs. Preparing the surface of the weathering proof treatment on the Sunken Slab, by thorough cleaning using wire brush and jet of clean water to remove the layer of moss / fungi / algae / dust / loose materials etc., to expose the virgin surface, providing and applying three or more coats of fibre reinforced acrylic elastomeric waterproof coating (Brush bond roof Guard of M/s.Fosroc Chemicals India Ltd / Dr.Fixit 653 Roofseal Select of M/s.Pidilite Industries Ltd or approved equivalent), as per manufacturers specifications, over a coat of water based acrylic emulsion polymer, efflorescence resistance penetrating primer (Nitoprime AW/ Nitoprime WB of M/s.Fosroc Chemicals India Ltd, Dr Fixit 604 Prime seal of M/s.Pidilite Industries Ltd or approved equivalent), as per manufacturers specifications. The chemicals / materials shall be used as per the manufacturer’s specifications and instructions of Engineers. The rate shall also include carefully cutting and making ‘V’ shaped grooves, using mechanical hand cutters along the cracks on the surface of the walls / roof for a width of not less than 5 mm at the top and for the required depth. |
| 18 | PLASTERING with cement mortor 1:3 (one cement and three sand) 10mm thick including mortar plasticizer at 200ml per Kg of cement used, cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 19 | PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including mortar plasticizer at 200ml per Kg of cement used, cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 20 | Painting the walls with two coats ready mixed interior emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed. |
| 21 | Painting the walls with two coats ready mixed exterior emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed. |
| 22 | Paving the flooring with self designed Ceramic tiles of size 305x305x6mm of approved quality and colour over a base layer of C.M.1:3, 20mm thick in all floors used 0.20 kg / m2 including finishing the joints and pointing flush with even surfaces etc., complete complying with standard specifications and as directed.. (The tiles should be got approved by the Executive engineer before use on works). |
| 23 | Dadooing the walls with colour printed Design glazed tiles of size 150mmx150mmx6mm of approved quality and colour over a base layer of C.M.1:2, 10mm and pointing the joints with white cement mixed with colouring pigment at the rate of 0.40 kg/sq.m neatly in all floors, curing etc., complete complying with standard specification and as directed by the departmental officers. (The tiles should be got approved by the Executive engineer before use on works). |
| 24 | Paving the floor with best approved quality fin polished Granite stone slabs of size 1200mmx600mm of 20mm thick synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) with required cement slurry and mortar plasticizer and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with matching colouring pigments etc., complete complying with standard specification and as directed by the departmental officers.(The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work). |
| 25 | Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the departmental officers. |
| 26 | Finishing the top of roof with one course of machine pressed tiles of size 23x23x2cm laid in cement mortar 1:2 (one of cement and two of sand)mixing with water proofing compound confirming to ISS at 2% weight of cement used and pointed with water proofing compound mixed with red oxide etc., complete complying with standard specification and as directed by the departmental officers. |
| 27 | Supplying and fixing in position of best approved quality of rain water down fall pipe 110mm dia having a pressure of 4Kg/sq.cm including cost of PVC bents, PVC shoe, cast iron gratings of required diameter and special clamps, brass screws nails etc., and fixing of cast iron gratings at junction of parapet and the junction of roof slab including finishing neatly etc., complete complying with standard specification as directed by the departmental officers. |
| 28 | Supplying and fixing in position of best Indian make PVC Water Tank of 1000 litres capacity confirming to ISI standards as directed by the departmental officers including cost of material and conveyance charges of material to work site etc., complete complying with standard specifications. |
| 29 | Supplying and fixing in position Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with \\"P\\" or \\"S\\" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works). |
| 30 | Supply and fixing in position of best Indian make white / colour glazed eartherware lipped mouth flat back urinal of best quality and approved make of size 430mmx260mmx350mm with GI Pipe, 32mm dia bell mouth PVC Connection and waste pipe, 15mm dia GI Pipe of required length, 15mm dia GM Wheel valve, 15mm dia brass nipple 2 Nos and fixing the urinals in position with necessary TW plugs, Clamps, Screws etc., including dismantling masonry and redoing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc., complete complying with standard specifications and as directed by the departmental officers.(The Urinal should be got approved by the Executive Engineer before use on works) |
| 31 | Supplying and fixing synthetic Grey, Paradise and similar varieties of Granite stone of size 0.61x1.22m of 18/20mm thick in all floors for urinal partition including cost of materials, labour charges for fixing, polishing etc., complete as directed by departmental officers. |
| 32 | Supplying and fixing in position 15mm dia brass CP Pillar tap (heavy duty) of approved make confirming to IS specifications and quality including cost of shellac, thread, etc., complete as directed by the departmental officers. |
| 33 | Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve of 25mm dia with ISI make including cost of shellac, thread balls, etc., complete. |
| 34 | Supplying and fixing in position 150 x 100mm ‘P’ or ‘S’ stoneware gully trap ‘A’ grade with CI double gettings of size 150x150mm and 230 x 230mm at bottom and top respectively with necessary earth work excavation laid over a bed of brick jelly cement concrete 1:3:6 (one cement, three crushed stone sand and six broken brick jelly) 150mm thick using 40mm size broken brick jelly including necessary brick work and plastering including dismantling masonry wherever necessary and re-doing the damaged portions to the original conditions using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to stoneware sewer line etc., complete complying with standard specifications.(Each work excavation, brick work, plastering shall be measured and paid separately). The stone ware gully trap shoud be got approved by the Executive Engineer before use on works. |
| 35 | Supplying and fixing in position of bevelled edge mirror of approved quality and brand of size 600X450mm PVC / fibre glass framed 5.5mm thick shelf type with hard board packing etc., complete complying with standard specification as directed by the departmental officers. |
| 36 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade) calcium carbonate and natural fibers (wood powder / rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water /moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-charge. (Note: stainless steel butt hinges and necessary S.S.screws shall be paid separately) 30mm thick. |
| 37 | Stainless steel butt hinges 125x64x2.50mm. |
| 38 | Tower bolt 200x10mm. |
| 39 | Handle 125mm. |
| 40 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position complete as per direction of Engineer-in-charge Frame size 65x100mm. |
| 41 | Supplying and fixing in position best quality PVC soil / waste pipes of 110mm dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings etc., complete as directed by the departmental officers. |
| 42 | 75mm dia |
| 43 | Supplying and fixing in position 110mm dia PVC Door Elbow of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete. |
| 44 | Supplying and fixing in position 110mm dia PVC single door Tee of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete. |
| 45 | Supplying and fixing in position 110mm dia PVC Y of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete. |
| 46 | Supplying and fixing in position 110mm dia PVC Bend of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete. |
| 47 | Supplying and fixing in position 75mm dia PVC Door elbow of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete. |
| 48 | Supplying and fixing in position 75mm dia PVC single Door Tee of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete. |
| 49 | Supplying and fixing in position 75mm dia PVC Y of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete. |
| 50 | Supplying and fixing in position 75mm dia PVC Bend of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete. |
| 51 | Supplying, and fixing PVC pipes of 32mm dia (having working pressure 10 Kg/sqcm ) of approved quality and variety conforming to pressure IS 4985. The rate is inclusive of cost of pipe, all`` taxes, conveyance charges of materials and all other labour charges for fixing the PVC pipe as directed by the departmental officers etc., complete complying with standard specifications. The PVC pipe should be got approved by the departmental officers before use on work. |
| 52 | Supplying, and fixing PVC pipes of 25mm dia (having working pressure 10kg/sqcm) of approved quality and variety conforming to pressure IS 4985. The rate is inclusive of cost of pipe, all taxes, conveyance charges of materials and all other labour charges for fixing the PVC pipe as directed by the departmental officers etc., complete complying with standard specifications. The PVC pipe should be got approved by the departmental officers before use on work. |
| 53 | Supplying, and fixing PVC pipes of 20mm dia (having working pressure 10kg/sqcm) of approved quality and variety conforming to pressure IS 4985. The rate is inclusive of cost of pipe, all taxes, conveyance charges of materials and all other labour charges for fixing the PVC pipe as directed by the departmental officers etc., complete complying with standard specifications. The PVC pipe should be got approved by the departmental officers before use on work. |
| 54 | Supplying and fixing in position 32mm dia PVC Bend of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete. |
| 55 | Supplying and fixing in position 32mm dia PVC Coupler of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete. |
| 56 | Supplying and fixing in position 32mm dia PVC Tee of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete. |
| 57 | Supplying and fixing in position 25mm dia PVC Bend of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete. |
| 58 | Supplying and fixing in position 25mm dia PVC Coupler of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete. |
| 59 | Supplying and fixing in position 25mm dia PVC Tee of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete. |
| 60 | Supplying and fixing in position 25mm dia PVC Reducer Tee 25mmx20mm of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete. |
| 61 | Supplying and fixing in position 20mm dia PVC Bend of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete. |
| 62 | Supplying and fixing in position 20mm dia PVC coupler of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete. |
| 63 | Supplying and fixing in position 20mm dia PVC Tee of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete. |
| 64 | Construction of Inspection Chamber of clear size 0.6mx0.6m including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1;5 (One cement and Five sand) using best quality of second class Ground Mould Bricks of size 9”x4 3/8” 2x3/4”with Plastering with Cement Mortar 1:3 (One cement and Three Plastering Sand) 12mm thick inner and outer sides and wearing coat 1:3:6 (One cement, three crushed stone sand and Six aggregate) 15 cm thick and covered with precast slab 5 cm thick etc., complete complying with standard specification and as directed by the departmental officers. |
| 65 | Manufacturing, supplying and fixing of stainless steel hand rails for staircase near wet riser using 50mm dia 304L Grade stainless steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade stainless steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grauted into the wall and provided with 93.00mm thick stinless steel circular base plate of 304 Grade. The rate shall included for grouting into corcrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges electrical charges etc., complete. |
| 66 | Supplying and fixing of UPVC (Up-plasticized poly vinyl choloride) louvered ventilators of from the profile the size of outer frame 60mmx58mm and shutter profile size of 60 x78mm both profiles are reinforced with GI/ 1mm 125 GSM and 100% corrosion free, the profile are multi colored chamber section with wall thick of 2mm. The EPDM rubber (Black colour ) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiation pin headed glass 4mm thick should be provided to the louvers. The Ventilator should be fixed to the wall with 100% packing with screws silicon packing allround the frames. The Ventilator should got approved from the Executive Engineer before use on work. Please Enable Macros to View BoQ information |
