|
| 1 | DSR 2023 ITEMS |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 3 | 1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 5 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 7 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 8 | 12 mm cement plaster of mix : |
| 9 | 1:6 (1 cement: 6 fine sand) |
| 10 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 11 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 12 | Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer in-Charge. |
| 13 | 80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern. |
| 14 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 15 | 25 mm nominal bore |
| 16 | 40 mm nominal bore |
| 17 | 50 mm nominal bore |
| 18 | LMR Items (Misc.) |
| 19 | Preparation and consolidation of sub grade with manual compaction of required capacity after excavating earth to an average of 22.5 cm depth, dressing to camber including making good the undulations etc. and re- rolling the sub grade and disposal of surplus earth with lead upto 50 metres. |
| 20 | Cleaning of under ground water storage tank with bleaching powder & potassium permanganate/chlorine tablet, displaying date of cleaning on tank and removal of all silt etc. within or outside the campus as per direction of Engineer-in-charge. |
| 21 | Removal of small peepal tree from terrace etc. by dismantling and uprooting including necessary repairs etc. all complete as per direction of Engineer-in-Charge. |
| 22 | Credit of unserviceable fittings and other materials recieved from dismantling: |
| 23 | Brass/CP Brass Bib Cock, Stop cock, Pillar Cock Gate Valve and other fittings etc. Please Enable Macros to View BoQ information |
