Name of Work:- PROVIDING AND LAYING PREMIX CARPETING WITH SDBC ON STREETS NO 4 ABCHAL NAGAR WARD-19 Est Cost Rs. 5.65 lacs
Sl. No.
Item Description
1
Providing & fixing 560 mm, 500 mm and 450 mm internal diameter circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS:12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines over manholes including cement concrete coping (M:20) around the frame etc. Dia of steel for lifting hook is 16mm (for EHD and HD). RCC Man hole cover with Frame560mm i/d RCC man hole cover with frame as per ISIHeavy duty
2
450mm i/d RCC man hole cover with frame as per ISILight duty
3
Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects.200mm o/d pipe
4
Constructing brick masonry road gully chambers as per standard drawings (as per sizes given below) including dressing of beds and sides of chambers to exact profiles, 15cm thick C.C 1:6:12 in foundation, first class brick work laid in cement sand mortar 1:5, 40mm thick cement concrete 1:2:4 topping inside the chamber with a floating coat of 1.5mm thick neat cement laid in one operation to the topping, the entire inner surface of the chamber rendered with neat cement not less than 12.50mm in thickness of 1:2 cement sand plaster and finished with a floating coat of neat cement 1mm thick left absolutely smooth polished and correct to template including cost of precasted RCC road gully grating and frame including paint with coal tar (as specified in item No. 29.49) complete and to the requirement of the Engineer-In-Charge.Single Road Gully chamberSize 610mm x 457mm x 800mm
5
Tack Coat @ 0.40kg per sqm: Providing and applying tack coat with penetration gradebitumen VG-10 using bitumen pressuredistributor at the rate of 0.40 kg per sqm onthe prepared bituminous surface/granularsurface treated with prime coat after cleaningthe surface complete as per technicalspecifications
6
Bituminous Macadam 50mm to 75mm thickness (Grading II) Providing and laying bituminous macadam 50mm to 75mm thick with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @3.4%, laid over a previously prepared surface with hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolled to achieve the desired compaction complete as per technical clause 504 of MORT&H specifications
7
Semi-Dense Bituminous Concrete 25mm to 30mm thickness (Grading II) Providing and laying semi dense bituminous concrete 25mm to 30mm thick with Continuous type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5%, laying with a Paver Finisher Mechanical to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete as per IRC-111 (2009) specifications Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
