Name of Work:- Supply the material of street light for maintance at ablowal dairy project. Est Cost Rs. 7.22 lacs
Sl. No.
Item Description
1
Supply and Erection of LED Street Light 70 watt (including LED driver) with pressure die cast aluminium housing with control gear ( with IP 65/ IP 66 protection), CRI Minimum70, CCT >5700K, toughened glass fitting, LED fixture minimum 120 lumens per watt and operating voltage between 140 to 270 volt, THD <10% ingress protection (asper BIS standards) , surge protection 10kv and above (as per (IS/IEC standards) wattage of each LED High power LED of 1 watt to 5 watt with mandatory modularlenses, input AC frequency 50 Hz ± 3 % 5 year warranty including their drivers complete along with erection of the same with connections, testing etc. complete in allrespects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab videLetter no AT-2021/GL 1410-1422 Dated 06/05/2021. Dated 06/05/2021. Besides this thelighting fixture manufactures should have in house NABLaccredited labortary. Make - Havells ENDURASUNDOWNSL70WLED 757PASYBOPC / Crompton LSTS-70-CDL-M / SURYA SLE UL 70W IP66 NGN / Bajaj ENXTP 84L WH CR PC SD
2
COMMON SCHEDULE OF RATES AUTOMATIC VOLTAGESTABLIZER, TIMER: (34.26 B) TIMER: S/E of Microprocessor BasedStreet Light Controller with digital time switch daily programmed with stand bylithium battery with back up of 6 years with min. time between 2 switching operations is 1 minute, three pole power contactors 40A. with coil voltage 220-230V ACwith 1 no. aux. contact NO, MCB 2 pole 40amp. (C-Curve, 10kA) & power wiring with single core PVC insulated FR cable 10 sq. mm and control wiring with PVC insulated FRcable 1 sq. mm, 1 no. two position selector switch to bypass timer and other accessories & petty material (din rail, 4 pole bakelite terminal strip 63A/ 440V AC,required nut bolts) should be fixed on bakelite sheet 6mm thick to be mounted in a IP54 surface/ flush mounting powder coated sheet metal (1.60mm thick) cabinethaving size 450mm x 600mm x 150mm to switch ‘ON’ all the 3 phases & switch ‘OFF’ 3 phases pre-fixed timings complete in all respect as per satisfaction ofEngineer-in-charge:-Street Light Controller (For Three Single Phase Circuits) with 3 Nos. Three Pole Power Contactors 40A, 1 no. aux. contactor 6 amp. (2NO+2NC) with coil voltage 220V AC, 3Nos. MCB 2 Pole 40amp. (C-Curve,10kA) & petty material (Din rail, 2 Nos. 4 pole bakelite terminal strip 63A/ 440V AC, required nut bolts)
3
Supply of LED Street Light 150 watt (including LED driver) with pressure die castaluminium housing with control gear ( with IP 65/ IP 66 protection), CRI Minimum 70, CCT >5700K, toughened glass fitting, LED fixture minimum 120 lumens per watt and operating voltage between 140 to 270 volt, THD <10% ingress protection (asper BIS standards) , surge protection 10kv and above (as per (IS/IEC standards) wattage of each LED High power LED of 1 watt to 5 watt with mandatory modularlenses, input AC frequency 50 Hz ± 3 % 5 year warranty including their drivers complete along with erection of the same with connections, testing etc. complete in allrespects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab videLetter no AT-2021/GL 1410-1422 Dated 06/05/2021. Dated 06/05/2021. Besides this thelighting fixture manufactures should have in house NABLaccredited labortary. Make - Havells ENDURASUNDOWNSL70WLED 757PASYBOPC / CromptonLSTS-70-CDL-M / SURYA SLE UL 150W IP66 NGN / BajajENXTP 84L WH CR PC SD
4
SINGLE ARM BRACKET 32 MM X 1 METER
5
MS FLAT Clamp 25mm x 5 mm x 50 cm with Nut Bolt
6
Junction Box with Clamp
7
GI Earth Rod 20mm x 3 meter
8
GI PIPE 40 MM x 10 FEET
9
GI Wire 8 SWG
10
DWC PIPE 50/38 DIA
11
Slive Paint
12
Malmal Cloth
13
Adjustable clamps
14
Nut Bolts
15
GULMEKHA
16
Steel Wire
17
Aluminium Conductor 2 core x 16mm ISI mark as per IS:7098
18
Aluminium Conductor 2 core x 2.5 mm Flat Cable IS mark As per IS:694
19
TimeSwitch Astronomical (make LK)
20
Three Pole Power Contractor Type MNX-40 Make (LK)
21
Single Pole MCB 6-32 AMP 10KA Make (LK)
22
Aluminium Thimble 16mm
23
Aluminium Thimble 6 mm
24
Copper Pin Terminal 1.5 mm Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
