|
| 1 | Box cutting or filling in Road embankment in all sorts of soil including spreading the spoils properly over the flank as necessary or on berm to approximate grade & camber and rolling the sub-grade with power roller to proper camber and grade as per direction and satisfaction of Engineer-in-charge including uprooting and removing plants and jungles when and where necessary. a) Depth up to 150 mm. |
| 2 | b) For each additional Depth of 150mm and part (from150 mm to 300mm) thereof. |
| 3 | Engagement of Excavator (JCB) for Land development works including cutting of wild trees, leveling, dressing, scraping of existing road surface, dismantling of brick drain etc. as per direction of EIC. |
| 4 | Removal of Earth ash, Sand, Moorum and similar materials within a distance of 5 Km including carriage by head up to a distance of 50 mtrs. at each of two points. |
| 5 | Granular Sub-base with Graded Material (Table:- 400-1)- B. By Mix in Place Method : Construction of granular sub-base by providing graded material, mixing by mix in place method with Rotavator at OMC, spreading in uniform layers with Motor grader on prepared surface in proper grade and camber, compacting with vibratory roller to achieve the desired density, including lighting, guarding, barricading, including cost of all materials, machinery, tools and plants including cost of quality control complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). (iii) Grading – III : (150mm th). |
| 6 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(i) Pakur Variety. |
| 7 | 100mm thick interlocking designer concrete paver block M-50 grade for high traffic zone, bus terminus, industrial complex, mandi houses etc. as per IS: 15658 2006(over20 40 mm medium sand bed on 250 mm thk. WBM/WMM base course & 250mm thk. bound granular /granular sub-base course & filling the interstices of blocks with fine sand by brooming & subsequent watering including cost of sand for sand bed but excluding cost of base, sub-base course & subgrade preparation.) complete as per direction of Engineer-in-Charge. Grey. |
| 8 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(a) For works in ground floor. (i) Tor steel/Mild Steel. I. SAIL/ TATA/RINL. |
| 9 | Hire and labour charges for shuttering with centering and necessary staging up to 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (up to roof of ground floor)(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. |
| 10 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes. a) Pakur Variety. Please Enable Macros to View BoQ information |
