|
| 1 | Item Description |
| 2 | Dismantling of existing Brick work, existing Flooring and Scraping of Cement Plaster and removing of waste material from the site of work dismantling/ Dismembering existing False Ceiling, Aluminium Partition and stacking all Dismantled material by manual labour 50 mtr. away from site. |
| 3 | Providing and Fixing lightweight wall panels AAC Reinforced Panels of 75 mm thickness, 600 mm width, and length up to 3000 mm (in 100 mm intervals) with tongue and groove edges and minimum 2 steel reinforcement bars per panel. The Panels have properties of dry density 550–650 kg/m³, working density 600–700 kg/m³, weight 53 kg/m² (75 mm) and 70 kg/m² (100 mm), compressive strength ≥4.2 N/mm²,reinforcement steel tensile strength ≥500 N/mm², wind load resistance up to 180 kg/m², water absorption <33%, fire resistance 2.5 hours (75 mm) and 4 hours (100 mm), thermal conductivity 0.16 W/m•K, and STC rating 38–43 dB (100 mm panel). Installation shall include panel alignment, fixing to structural elements, joint mortar, mechanical connectors, joint reinforcement where required, cutting around openings, and finishing of joints ready for surface finishing. The above work shall be including labour, mortar, jointing materials, connectors, anchors, hardware, and other accessories and complete in all respects. Makes : ZMARTBUILD AAC WALL/ AEROCON/ RAPICON or Equivalent. |
| 4 | Providing and fixing 32 mm thick flush door shutter with 1.0 mm laminate (Teak Shade) Makes : GREENLAM/ CenturyPly or Equivalent. |
| 5 | Providing and laying Laminate wooden flooring (Grade AC4 or AC4 plus laminates) 6 mm to 12 mm thick, having a good backing layer made up of plastic laminate or melamine, core made up of medium-density fiberboard (MDF),which is less resistant to impact damage and less resistant to being dented by heavy furniture, having a décor layer to give each floor its appearance and consisting of one or more sheets of paper impregnated with melamine resin and top wear layer having clear aluminum oxide finish that protects the decorative layer and imparts the desired level of sheen, from full gloss to low gloss, duly fixed to the base floor using adhesive as approved by the manufacturer. Makes: Pergo/ Arstrong/ Greenlam/ TESA or equivalent. |
| 6 | Providing and laying full body vitrified tile in floor of minimum thickness 15 mm with water absorption less than 0.06% and conforming to IS:15622, of approved make, brand and manufacturer, laid on 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.30 kg / sqm including grouting the joints with white cement and matching pigments etc. The slab must be cut with the zero chipping diamond cutter only. Laying of slab will be done with the help of notch trowel, wedge, clips of required thickness, vacuum cups for lifting, leveling system and rubber mallet for placing the slab gently and easily. Size of tile 800x2400mm of light colours and shades. Makes : Kajaria/ Somany/ Nitco or equivalent. |
| 7 | Providing and Fixing wall Paneling with 2'x1.1/2\\" wooden frame 12mm thick HDMR Board with 1mm thick Laminate in approved shade. Makes : Action Tesa, GREENLAM, CenturyPly or Equivalent. |
| 8 | Providing and Fixing Victoria Paneling with 2'x1.1/2\\" wooden frame , 12mm thick HDMR Board and 1'x1/2\\"x 3/4\\" HDMR Moudling. Makes : Action Tesa, GREENLAM, Century Ply or Equivalent. |
| 9 | Providing and Fixing wall Paneling with 2'x1.1/2\\" wooden frame , 12mm thick HDMR Board finish with MDF Fluited Panel. Makes : Action Tesa, GREENLAM, CenturyPly or Equivalent. |
| 10 | Providing and Fixing Wooden Ceiling with G.I. Channels frame, 12mm thick ply finished with Teak Wood fluiting panels Makes : CenturyPly/ Kitply or equivalent. |
| 11 | Providing and Fixing wall Panelling with 2'x1.1/2\\" wooden frame, 12mm thick HDMR Board Finished with fluited laminates. Makes : Action Tesa, GREENLAM, CenturyPly or Equivalent. |
| 12 | Providing and Fixing wall Panelling with 2'x1.1/2\\" wooden frame, 8 mm thick HDMR Board Finished with Groove. Makes : Action Tesa, GREENLAM, CenturyPly or Equivalent. |
| 13 | Providing and Fixing HDMR Board Cut work Jali including Frame. Makes : Action Tesa/ GREENLAM/ CenturyPly or equivalent. |
| 14 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering up to 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : Makes : Saint-Gobain Gyproc / USG Boral |
| 15 | Providing and Fixing Soundscapes MR clouds having thickness of 12.5mm panel and the backing of 12mm water proof ply , with Humidity Resistance RH 75% and recycled content of minimum 40%, come in various shapes options like Square/ Circle/Hexagon/ Trapezoid/Parallelogram (left and right)/ Rectangle (small and large) and in standard traffic white color with LR 90% or in the color specified by the Architect/ Engineer in Charge (Ivory/Pale green/ Pastel Blue/ Traffic grey/ Pale Brown) provisions are already made for integration of installation system for suspension of individual or grouped panels. The panels to be suspended individually using the Deck hanging Kit. Each kit to consist of gripper structure anchors with an outer diameter of 16mm and height 23 mm aircraft cables or threaded wire of 1.5 mm dia 2.44mm LM in length and bottom end cable adjusters of 8.9mm outer diameter. Each Panel to be suspended using the aircraft cables or threaded wire which are suspended from the soffit using the gripper structure anchors and its other end passing through the bottom end cable adjuster which are screwed in the 4 corners of the frame bracket system. The height and level of the panels can be adjusted using the bottom end cable adjusters complete in all respects as per manufacturer specification and as per the direction of Engineer in charge. Make: ANAKON/ARKTURA/ACOUSTIC FIRST or Equivalent. |
| 16 | Providing and Fixing of G.I studs 2400mm X 50mm web flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel With 120GSM zinc coating specially designed for Acoustic vibration management and long life with a backing 50mm thick Rock wool @48kg density insulation intact with chicken mess wires. MAKE: ANAKON/ARMSTRONG/HUNTER DOUGLAS |
| 17 | Providing and Fixing of Spandex System on G.I studs 2400mm X 50mm web flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel With 120GSM zinc coating specially designed for Acoustic vibration management and long life with a backing 50mm thick Rock wool @48kg density insulation intact with chicken mess wires. 600x1200x15mm Magnesite pine wool tile with NRC 0.9-1 to be mechanically fastened on the G.I Studs. Then 12mm clip rail system are screw fixed on to the 12 mm MDF waterproof and Acoustics panel’s .Then the Spandex is stretched over the clip rail system. The installed system should provide NRC OF 0.95. Spandex colour as per Architect choice-Ref attached specifications for more details. The system to be installed on G.I studs 600x600mm centre to centre 2400mm X 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating specially designed for Acoustic vibration. MAKE: ANAKON/ARMSTRONG/HUNTER DOUGLAS |
| 18 | Providing and fixing zebra blind made of 100% polyster fabric, shear and solid repeat: 9 cm x 6 cm or 10 cm x 6 cm. Weight 319 GSM plus 5%. Size : 300 mm minimum to 3000 mm Maximum. Height : 600 mm Minimum to 2500 mm maximum. Aluminium pipe of extruded aluminum alloy 38 mm. Facia : Extruded aluminium alloy 74mmx74mm at 1 mm thick in matt finish. End caps of high density plastic in gloss finish. 38mm clutch. Base rail round shaped of extruded aluminium alloy 36mmx28mm with inserted steel rod performing as weight bottom and caps round shaped steel at 1 mm thick in high gloss finish. Chain control of which plastic dia 4.5mm x 6mm as standard. Spring loaded Brackets made of 1mm thick steel measuring 76mm x 48mm complete in all respect. Makes : Vista/ Hunter Douglas. (Shade as per approved.) |
| 19 | Supply, installation, testing and commissioning of Cassette ACs (2 Ton) Capacity. Make: Mitsubishi, O General or equivalent. As per the satisfaction of Engineer-in-Charge. |
| 20 | Supply, installation, testing and commissioning of Split Ac (1.5 Ton ) Capacity. as per the satisfaction of Engineer-in-Charge. Make: Mitsubishi, O General or equivalent |
| 21 | Providing and Installation of AC Copper piping with PVC Pipe and wiring etc. including cost of material, accessories & Labour complete Job (provisional Qty). Payment will be made as per measurement at site. |
| 22 | Providing and Fixing Internal Electrical Items as per following details :-a) COB lights 15 watts (75mm-100mm) (50 Each)b) Aluminium Profile Light (19mm - 25mm) with LED. (150Rmt) c) COB Light (70 Rmt)d) COB Concealed Light 12 watt (50mm-100 mm) ( Makes : Havells/ Wipro)(75 Each)e) Wall Mounted Lamp Shades with LED Lamp (08 Each)f) LED Fixture 36 watt (2'x2') Slim Rim (Makes : Wipro/ Havells/Philips) (15 Each)g) Modular Switches as per requirement of site (Makes : Legrand/ Havells/ Wipro)h) MCBs as per requirement of site (Makes : Legrand or equivalent)i) Main Panel as per requirement of site (Makes : Legrand or equivalent)j) Copper Wiring as per requirement of site (Makes : Havells or equivalent)k) PVC Conduits as per requirement of site (Heavy Duty ISI marked)Note: Any other such items as per requirement of site. |
| 23 | Renovation of Toilets as following:a) Providing and Installation of Wall Hung WC with Concealed Cistern, Seat Cover with all necessary arrangements. (6 Nos.)b) Providing and Installation of Washbasin 550 mm vessel, CP waste & Bottle trap. (7 Nos.)c) Providing and Installation of Urinal with Urnial Partition along with urinal sensor with all nesseary fittings complete job. (6 Nos.)d) Providing and Installation of Looking Mirror, Towel Rail, Soap Dispensor Hand Dryer, Air- freshner & TAP Sensor. (As per requirement), Looking Mirror, Towel Rail, Soap Dispensor Hand Dryer, Air- freshner & TAP Sensor. (As per requirement)e) Providing and Installation of CPVC Pipes of necessary DIA with necessary items like Socket, Elbow, TEE, Extension nipple etc.f) UPVC Pipes of necessary DIA) in flooring includes floor tap, Socket, Bend/ Junction complete jobs.Note: Above items includes cost of material, transportation Taxes complete plumbing job including connection to Duct or main supply lines. Makes : KOHLER/ TOTO/ QUEO/ GROHE |
| 24 | Providing and Fixing Modular Cubical Classique-Versatile- 1995 (Thickness 12mm, Door 750x1785, Divider Height 1820, Overall height 1995, Depth 1288, Width 1336) Classique - Versatile 1995- Accessories Natural Anodized Door Stopper, Natural Anodized Top rail, natural Anodized U Channel, Rubber for Door Stopper Channel, SST 316 Adjustable Foot, Sst 316 Coat Hook with Stopper, SST 316 Concealed Hinge, SST 316 Door Knob, SST 316 Screw, SST 316 Thumb Tum Lockset, Wall Plug. Installation Classique- Versatile 1995. Complete in all respect as per the satisfaction of Engineer-in-Charge. |
| 25 | Providing and Fixing Sensor Doors and along with fixed glass at the main Entrance. Complete in all respect as per the satisfaction of Engineer-in-Charge. Make: Dorma / Hafele, GEZE or equivalent. |
| 26 | Item Description |
| 27 | All HSR/ DSR items approved DNIT Please Enable Macros to View BoQ information |
