|
| 1 | Demolition of Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work all as directed by Engineer-in-charge. |
| 2 | Supply and Fixing M S Pipes hand rail medium grade for Balcony Railing etc Complete all as specified and directed by Engineer-in Charge. |
| 3 | Supply and Fixing Mild steel in flat, round or square bars, in available lengths Fe 410-W (Gde-E-250) quality-A Balcony Railing Complete all as specified and directed by Engineer-in Charge. |
| 4 | M&L for rendering or plastering work 10 mm thick in CM 1:3 in fascia or edging of Chajjas, ceiling etc, incl roughening old concrete surface and making the line in true shape and finishing the surface without using extra cement. Including two coat exterieor emulsion paint. Note :- Rate for form work and scaffolding (upto 10.0m) if required to be included in the rate quaoted by the contractor. |
| 5 | Demolition of cement concrete(un-reinforced) in ground floor and pavings of any thickness (below or above ground level) all as directed by Engineer-in-charge. |
| 6 | Cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in sub base, 75 mm thick and finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge |
| 7 | M&L for non skid heavy duty designer coloured tiles as in floor for parking and corridor or other open area, 10 to 12 mm thick area of each tile exc. 0.11 sqm and n. exc. 0.18 sqm in floors etc of pattern as approved by GE, set and jointed (joint free) in neat cement slurry and pointed in coloured cement. over and incl screed bed or bedding layers of mortars 15 mm thick in CM 1:6 for laying floor finishes all as spd and directed. |
| 8 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each incl taking out hold fast. |
| 9 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each all as specified. |
| 10 | Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each all as specified. |
| 11 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw thdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, odules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. ( M.S. hold fast/ lugs or SS dash fasteners shall be paid for including). ®Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. NOTE:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster,Filling of concrete 1:3:6 type c-1 hold fast for chowkhat,similar wall tile,floor tile etc and as per site requirement. |
| 12 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge |
| 13 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw thdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, odules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. ( M.S. hold fast/ lugs or SS dash fasteners shall be paid for including). ®Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. NOTE:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster,Filling of concrete 1:3:6 type c-1 hold fast for chowkhat,similar wall tile,floor tile etc and as per site requirement. |
| 14 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge |
| 15 | S&F Factory made single extruded WPC (wood polymer composite) 35mm thick solid wire gauge door shutters including of double wire mesh (steel & aluminium XPM) , Comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof , water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screw , joint-less design manufactured with cnc machine . design as per executive engineer . |
| 16 | S & F factory made solid PVC door frame single rebated of size 50X47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S Square tube in opening as per spd & drg complete all as specified and directed. |
| 17 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 18 | Supply and fixing Factory made Ventilator 1.25mm thick box type(primer coated)ERW hollow P section of size 60mmx25mm including grill using 10 sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bar of T Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T Section of size 60mmx25mm and 1.25mm thick including cutting holes and good dismantled portion in PCC(1:2:4) type B1 four Nos for each window including following fitting welded to frame shutter :(a) Hold fast,150mm long of 12mmx3mm made to shape O4 Nos per window (b) handle of Z Sec20mmx25mm, 100mm long-per No leaf (c) MS Tower bolt 150mm long-02No per leaf .(d) Z section 20mmx25mm, 100mm long stopper 1 No per leaf. (e) cleat 55mm long of hollow square 15mmx20mmx63mm welded to hinge. 1 No per leaf (f) MS Pintal hinges of size 75mmx12mm. 2 Nos per leaf, including Stainless steel wire cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with alluminium wire staples and glass pane 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint complete. Make/ Manufacture by 1. M/sTee Pee Amritsar 2. M/s Mahindra Fabricators Hayal Pathankot 3. M/S Dhiman Industries, Mamun: NOTE:- During Fixing of Window, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement. NOTE:- During Fixing of Ventilator, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile etc and as per site requirement. |
| 19 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw thdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, odules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. ( M.S. hold fast/ lugs or SS dash fasteners shall be paid for including). ®Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. NOTE:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, Filling of concrete 1:3:6 type c-1 hold fast for chowkhat,similar wall tile,floor tile etc and as per site requirement. |
| 20 | Taking down existing Cupboard/kitchencabinet shutter of any description and supply & fixing factory made 20mm thick solid WPC( wood particle composite) sheet one side UV printed( of pattern as approved by GE) and other side wood nature colour for cupboard/cabinet shutter of density 600 Kg/Cbm bent 90 degree including 100% termite/ water proof, fire redardent, eco friendly and finish at all edges at level etc. complete all as specified and directed by engineer-in-charge. |
| 21 | S&F in repair factory made 20mm mm thick solid WPC(wood composite) without prelam sheet having both side wood nature color for cupboard partition/slabs of density 600Kg/Cbm bent 90 degree including 100% termite/ waterproof, fire redardent, eco friendly, complete all as specified and directed by engineer-in-charge. |
| 22 | S & F Continuous (piano) hinges,mild steel, bright finish Width of flapsequal to shutter thickness complete all as specified and directed by engineer-in-charge. |
| 23 | M&L for 0.80mm thick PVC edge binding tape around the 18 to 20mm thick PVC shutter, edge color as directed complete all as specified and directed by engineer-in-charge. |
| 24 | M&L high quality magnet catcher for cupboard shuttter, complete all as specified and directed by engineer-in-charge. |
| 25 | S&F 35mm thick plain framed panelled door shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply ,the size of rail and style as per IS : 1003 Part-I, Kiln seasoned and chemically pressure treated factory made shutters wood is to be incorporated all as specified, complete all as specified NOTE :- All screws shall be self tapping chrome plated |
| 26 | S&F 300mm long Stainless steel sliding door bolts with hasp and staple (bolt type) and fixing clips of sheet, bolts and sliding bolts complete all as specifed and directed by Engr-in-Charge |
| 27 | S&F Stainless steel Tower Bolt of 150 mm long fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge |
| 28 | S&F Stainless steel Handel of 150 mm long fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge |
| 29 | Taking up or down steel tubing 15mm bore and connections all as spd. |
| 30 | S&F in repair 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified. |
| 31 | All as per above item No here-in-before, but fixing only |
| 32 | M&L cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth all as specified. |
| 33 | S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) all as specified and directed by Engineer-in charge. |
| 34 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white(excluding flushing cistern and flush pipe) complete all as specified and directe by Enginerr-in charge. . |
| 35 | S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle incl brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified. |
| 36 | S&F in repair plastic water closet seat and cover incl. mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-charge. |
| 37 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm diapipe with 1.25 metre long flexible tube and ABS wall hook including makingconnections and fixed in position complete in all respect as specified. |
| 38 | S&F in repair Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern |
| 39 | S&F in repairs Chromium plated Jet suitable for pedestal pattern water closet with butterfly base and PVC connection pipe with CP brass check nut at one and suitable for 15mm bore pipe/fittings complete all as specified. |
| 40 | S&F in repair vitreous china wash hand basin white, flat back /round of bowl size 550 x 400mm excluding waste coupling, taps but including brackets complete all as specified. |
| 41 | S&F Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm all as specified. |
| 42 | S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, |
| 43 | S&F in replacement stainless steel plate rack of size 750mm X 750/900mm X 250 mm all as specified |
| 44 | S&F in repair 15mm bore pillar tap fancy type cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without letterd hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed. |
| 45 | S&F in repairs 15mm bore bib taps fancy type chromium plated with crutch or butter fly handle, screwed down for iron pipe or brass ferrule and fixed complete all as specified., |
| 46 | S&F in repair 15mm bore stop valve/angle valve fancy type chromium plated with long shank concealed type cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed both ends for iron pipe or for union and fixed incl CP nipple where required complete all as specified. |
| 47 | S&F in repair cast copper alloy CP shower arm arm 200mm long heavy casted body with wall flange complete all as specified . |
| 48 | S&F brass chromium plated shower rose 150mm size with swivel joints fixed in repairs including fixing to steel pipe or union all as specified. |
| 49 | S&F chromimium plated Tubular towel rail 20mm dia complete all as specified and directed |
| 50 | Supply and fixing in repairs 32/40 mm dia bore PVC flexible pipe for wash hand basin/kitchen sink complete all as specified . |
| 51 | S&F in repairs CP waste coupling/waste fittings, brass,cromium plated for sink/ wash hand basin etc size 32/40mm long/ short thread |
| 52 | S&F in 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed to walls and floor etc complete all as specified and directed by Engineer-in charge. |
| 53 | S&F in 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls and floor etc complete all as specified and directed by Engineer-in charge. |
| 54 | S&F in repair 75mm bore PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-charge. |
| 55 | S&F in repair 110mm bore PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-charge. |
| 56 | S&F in repair any dia bore PVC P/S trap as required complete all as specified and directed by Engineer-in-charge. |
| 57 | S&F in repair 75mm bore PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement complete all as specified and directed by Engineer-in-charge. |
| 58 | S&F PVC (SWR) junction single any size (single T) equal or unequal |
| 59 | S&F grating round 100mm/75 mm size of CP with/without hole for sink/wash basin all as specified. |
| 60 | Drapery curtain rod of metalic 25mm dia covered with PVC coating complete with bracket and side caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw compete all as specified. |
| 61 | M&L for Cement concrete 1:3:6 type C-2 (using 40mm graded agg) as in plinth,75 mm thick and finished even and smooth without using extra cement, including demolition of existing cement concret. |
| 62 | Taking down cement plaster of any decription on brick work or concrete surfaces incl. raking out joints,hacking for key, scrubbing down with water etc and removing same from the sites, complete all as specified and directed. |
| 63 | M & L Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, all as specified and directed.Note :- Rate for form work and scaffolding (upto 10.0m) if required to be included in the rate quaoted by the contractor. |
| 64 | M&L applying two coats of weather proof acrylic exterior emulsion paint as approved of any shade/colour over a coat of primer including preparation of newly plastered surfaces as per manufacture instructions complate all as specified and as directed.Note :- Rate for form work and scaffolding (upto 10.0m) if required to be included in the rate quaoted by the contractor. |
| 65 | M&L for 10mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement as directed , all as specified. Note :Rate for form work if reqd to be incl in the rate quaoted by the contractor. |
| 66 | Applying 2mm thick white putty on wall surfaces and rubbing the surface even and smooth all as specified and directed. |
| 67 | M& L for preparation of plastered or unplastered surfaces and applying two coats of oil bound distemper, complete all as specified and as directed. |
| 68 | M&L Preparation of old surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot , moulds moss and efflorosent salts , trading oil and greasy spots and applying two coats of weather proof acrylic exterior emulsion paint as approved of any shade/colour complate all as specified and as directed. |
| 69 | M&L Preparation of old surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot , moulds moss and efflorosent salts , trading oil and greasy spots and applying two coats of OBD complate all as specified and as directed. |
| 70 | M&L Granite (of any type), 18- 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including making full curving the edges and dismantling existing floor complete,complete. all as specified. |
| 71 | Supply and fixing Factory made Ventilator 1.25mm thick box type(primer coated)ERW hollow P section of size 60mmx25mm including grill using 10 sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bar of T Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T Section of size 60mmx25mm and 1.25mm thick including cutting holes and good dismantled portion in PCC(1:2:4) type B1 four Nos for each window including following fitting welded to frame shutter :(a) Hold fast,150mm long of 12mmx3mm made to shape O4 Nos per window (b) handle of Z Sec20mmx25mm, 100mm long-per No leaf (c) MS Tower bolt 150mm long-02No per leaf .(d) Z section 20mmx25mm, 100mm long stopper 1 No per leaf. (e) cleat 55mm long of hollow square 15mmx20mmx63mm welded to hinge. 1 No per leaf (f) MS Pintal hinges of size 75mmx12mm. 2 Nos per leaf, including Stainless steel wire cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with alluminium wire staples and glass pane 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint incl. taking down existing ventilator complete. Make/ Manufacture by 1. M/sTee Pee Amritsar 2. M/s Mahindra Fabricators Hayal Pathankot 3. M/S Dhiman Industries, Mamun: NOTE:- During Fixing of Window, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement. NOTE:- During Fixing of Ventilator, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile etc and as per site requirement. |
| 72 | Preparaption of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and providing two coats of synthetic enamel paint over a coat of pink primer all as specified & directed. |
| 73 | S&F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples |
| 74 | Dismantling false ceiling any type, any thickness complete all as specified |
| 75 | M&L Position suspended false ceiling system using T-grid suspended ceiling grid system. The size of grid shall be 600 x 600mm with GI frame work main runner 38 x 24mm x 3600 mm, cross tee 25 x 24 x 600mm / 25 x 24 x 1200mm and wall angle 24 x 24 x 2540mm ( thickness of the material of 0.30 mm), using 9mm thick ceiling panel laminated with PVC film on front face and foil back available in due drop texture as per IS-2095, part-I-1996, fixed in the grid of T-grid suspended ceiling grid system duly suspended by 4mm dig GI bar hanger from the purlins of the roof with butter fly clips all as specified and directed |
| 76 | S&F 100mm long (12Gauge) butt hinges stainless steel anodised and fixed all as specified NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm |
| 77 | M&L non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.36 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified. |
| 78 | Dismantling of floor, hearth or wall tiling any type floooring including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 79 | M&L non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified. |
| 80 | M&L glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 complete, all as specified. |
| 81 | S& F 50mm dia polished hardwood knobs fixed with screws, complete all as specified and directed by engineer-in-charge. |
| 82 | S&F in repair concealed type Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| 83 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long |
| 84 | Preparaption of old wooden surfaces of any description not otherwise described, over 10 cm width or girth and providing One coats of synthetic enamel paint, complete all as specified & directed. |
| 85 | Preparaption of old painted surfaces of any description not otherwise described, over 10 cm width or girth and providing one coats of synthetic enamel paint, all as specified & directed. |
| 86 | M&L for water proofing treatment to sunken portion of WC's, bathroom etc by applying cement slurry mixed with acrylic based polymer modified cementitious composite compound coating of approved make complete all as specified and as directed, comprising of following:-(a) Demolition and removing lean concrete/red bajri/moorum (b) cleaning the surface and 15mm thick plaster in cement mortar (1:4) using water proofing compound @3% by weight of cement on the floor and sides of wall of sunken portion and finished the surface even & smooth using extra cement complete (c) First layer of slurry of cement @0.488Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @0.253Kg/Sqm after curing of 4 hour (d) Second layer of cement slurry of cement @0.242Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @0.126Kg/Sqm after curing of 4 hours followed with curing of 48 hours (e) After treatment of surface sunken portion to be tested for water tightness any leakage or seepage is observed same to rectify before filling the sunken postion (f) M&L for providing lean cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate in sunken filling complete all as specified. |
| 87 | S&F 3mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by engineer-in-charge. |
| 88 | M&L for 12mm thick full body vitrified single piece tlies(homogeneous) for stairs with anti-skid property and having embossed groove( for tread portion) and its skirting in single colour set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and including 10mm thick rough cement plaster to recieve tiles in CM 1:4 including dismantling existing surfece, complete all as specified and directed by Engr-in-charge. Note:- the texture, colour shade of tiles and laying of tiles to any pattern and design with one or more colour shall be approved by GE and rates also include in this item for necessary raking circular cutting or notching and waste on tiles . Please Enable Macros to View BoQ information |
