|
| 1 | Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 2 | M&L for brick work in cement mortar 1:4 of old size sub class ‘B' bricks straight or curved on plan exceeding 6mtr mean radius complete all as specified and directed. |
| 3 | All as per description of item 02 above but except bricks complete all as specified and directed |
| 4 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other frame/Chowkhat of size 45x70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum , screw withdrawal strength of 2200N (Face) & 1100N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properly of being termite/borer proof, water/moisture proof and fire retardant 152 Section 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge. |
| 5 | Supply and fixing in repair factory made 20 mm thick solid WPC(wood particle composit) without prelam sheet having both side wood nature colour for cupboard partitions/slabs of density 600 kg /Cbm bent 90° including 100% termite/water proof, fire rertradent, Eco friendly complete all as specified & directed by Engineer-in-Charge. |
| 6 | Supply and fixing factory made 25mm thick solid WPC(wood particle composit) sheet one side UV printed (of pattern as approved by GE)and other side wood nature colour for cupboard shutter of density 600 kg /Cbm bent 90° including 100% termite/water proof, fire rertradent, Eco friendly, and finish at all edges at level etc complete all as specified & directed by Engineer-in-Charge. |
| 7 | S & F continous piano hinges (30mm width of flaps when open) mild steel, bright finish complete all as specified and directed |
| 8 | Supply and Fixing for soft close concealed steel Auto hinges for cabinet case complete all as specified & directed by Engineer-in-Charge. |
| 9 | S&F Stainless steel Handel of 100 mm long fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge |
| 10 | M&L high quality magnet catcher for cupboard shuttter, complete all as specified and directed by engineer-in-charge. |
| 11 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation board/slab/blankets, any thickness, including cover fillets. |
| 12 | M&L 12mm thick Seamless calcium silicate ceiling made any size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish including 2mm thick wall care putty over 2 coat of distemper to provide smooth finish complete all as specified and directed. |
| 13 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel a 457 mm centre to centre. |
| 14 | S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 15 | Supply and fix Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 16 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw thdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, odules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. ( M.S. hold fast/ lugs or SS dash fasteners shall be paid for including). ®Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. NOTE:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster,Filling of concrete 1:3:6 type c-1 hold fast for chowkhat,similar wall tile,floor tile etc and as per site requirement. |
| 17 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative designer type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charg. NOTE: DESIGN OF WPC DOOR TO BE DECIDED BY ENGR IN CHARGE. |
| 18 | S&F in repair floor door stopper of overall length of cover plate 140mm or 150mm alluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 19 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative designer type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Chare NOTE: DESIGN OF WPC DOOR TO BE DECIDED BY ENGR IN CHARGE. |
| 20 | S&F Factory made single extruded WPC (wood polymer composite) 35mm thick solid wire gauge door shutters including of double wire mesh (steel & aluminium XPM) , Comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof , water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screw , joint-less design manufactured with cnc machine . design as per executive engineer . NOTE: DESIGN OF WPC DOOR TO BE DECIDED BY ENGR IN CHARGE. |
| 21 | S&F in repair 300mm ordinary rat rail, rod pattern mild steel springs ISI marked including roller and roller plate complete including all necessary welding if required complete all as specified and directed. |
| 22 | S&F Stainless steel Tower Bolt of 150 mm long fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge |
| 23 | S&F Stainless steel Handel of 150 mm long fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge |
| 24 | S&F 300mm long Stainless steel sliding door bolts with hasp and staple (bolt type) and fixing clips of sheet, bolts and sliding bolts complete all as specifed and directed by Engr-in-Charge |
| 25 | Preparing wood or wood based old surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 26 | Preparation of old painted steel surface of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 27 | Supply & Fixed rotational moulded polyethiene water storage tanks of capacity 500 litres Vectus-smart weight of tank 22 to 25kg/tank , Blue colour, (cylindrical vertical with closed top) hoisted including Vectus T-Base, and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,brass valve 20mm high pressure with polythene float and fly nut etc complete including dismantling existing water tanks Rcc/Iron/Pvc all as specified and directed. Tank should be marked with stencil letter cutting Date and Year with enamel paint..(Make-Vectus/Suprime/plasto) |
| 28 | Supply & Fixed rotational moulded polyethiene water storage tanks of capacity 1000 litres Vectus-smart weight of tank 44 to 50kg/tank , Blue colour, (cylindrical vertical with closed top) hoisted including Vectus T-Base, and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,brass valve 20mm high pressure with polythene float and fly nut etc complete including dismantling existing water tanks Rcc/Iron/Pvc all as specified and directed. Tank should be marked with stencil letter cutting Date and Year with enamel paint..(Make-Vectus/Suprime/plasto) |
| 29 | M&L for providing glazed ceramic coloured wall tiles of size 600mmx300mmx7mm thick, set, jointed in colour cement to match laid over and including 10 mm thick rendering in cement mortar 1:4 including Dismantling of wall tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off permisescomplete all as specified and directed. |
| 30 | M&L for providing glazed ceramic coloured tiles of size 1200mmx600mmx10mm thick as in vertical surface set, jointed in colour cement to match laid over and including 15 mm thick rendering in cement mortar 1:4 as in vertical surface including Dismantling of tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off permisescomplete all as specified and directed. |
| 31 | M&L Non skid ceramic colour tiles 7 to 8 mm thick ( sq/ rect) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 inc Dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off permises complete all as specified and directed. |
| 32 | M&L vitrified tiles 10 mm thick ( sq/ rect) polished, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc set and jointed in neat cement slurry with 100mm granite border and with 5mm thick spacers jointed with sealent compound and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 inc Dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off permisescomplete all as specified and directed. |
| 33 | M&L vitrified tiles 10 mm thick ( sq/ rect) polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floor etc set and jointed in neat cement slurry with 100mm granite border and with 5mm thick spacers jointed with sealent compound and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 inc Dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off permisescomplete all as specified and directed. |
| 34 | M&L vitrified tiles 10 mm thick ( sq/ rect) polished, area of each tile exceeding 2.00 sqm but not exceeding 2.50 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 inc tile adhesive like Roff Tile Bonder or weberset fastfix including Dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off permisescomplete all as specified and directed. |
| 35 | M&L for 12mm thick full body vitrified single piece tlies(homogeneous) for stairs with anti-skid property and having embossed groove( for tread portion) and its skirting in single colour set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and including 10mm thick rough cement plaster to recieve tiles in CM 1:4 including dismantling existing surfece, complete all as specified and directed by Engr-in-charge. Note:- the texture, colour shade of tiles and laying of tiles to any pattern and design with one or more colour shall be approved by GE and rates also include in this item for necessary raking circular cutting or notching and waste on tiles . |
| 36 | M&L for parking coloured tiles of size 600x600mmx20 mm thick set jointed and pointed in neat cement slurry mixed with pigment laid over 15mm thick screed bed in cement mortar 1:4 includind demolition/dismantling old surface/tiles complete all as specified and directed. |
| 37 | Taking down cement plaster on brick or concrete surfaces any description including raking out joints hacking for key scrubbing down with water |
| 38 | M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement including scaffolding upto 7 mtr height and curing the surface complete all as specified and directed by Engineer-in-charge. |
| 39 | M&L applying two coats of weather proof acrylic exterior emulsion paint as approved of any shade/colour over a coat of primer including preparation of newly plastered surfaces as per manufacture instructions complate all as specified and as directed.Note :- Rate for form work and scaffolding (upto 10.0m) if required to be included in the rate quaoted by the contractor. |
| 40 | M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement and curing the surface complete all as specified and directed. |
| 41 | M&L for preparation of new plastered surfaces of wall including cornices plasters and applying two coat of oil bound distemper over a coat of primer over 2mm thick wall care putty on wall including rubbing the surface with sand paper to make it smooth complete all as specified & directed by Engr-in-Charge. |
| 42 | M&L rendering 10mm thick on concrete in CM 1:3 in facia or edging of chajjas,ceiling and roof projection making the line in true shape finished even & smooth thout using extra cement including scaffolding up to 7 mtr height. |
| 43 | M&L for preparation of new plastered surfaces of ceiling,chajjas and roof projection and applying one coat of oil bound distemper on ceiling complete all as specified & directed by Engr-in-Charge. |
| 44 | Taking up or down GI pipes 20mm bore and connection including cleaning for refixing or removal un-serviceable pipe,S&F GI tube 20mm bore medium grade galvanized with all fitting and fixed to short length complete all as specified and directed. |
| 45 | Taking up or down GI pipe 15mm bore and connections, including cleaning for refixing or removal unserviceable pipe,S&F 15mm bore GI tubing medium grade galvanized ISI marked with all fittings complete on walls complete all as specified and directed. |
| 46 | S&F in repairs vitreous china wash down water closet (pedestal pattern) white colour including fixing bolts and connecting to drain pipe, including seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, anti syphonic pipe etc complete all as specified and directed. |
| 47 | S&F in repairs vitreous china squatting pan, Orissa pattern size 580mm x 440mm ivory with integral foot rest including connection to drain out pipe and to flush pipe, anti-syphonage pipe etc complete including making good the disturbed flooring of existing specifications complete all as specified and directed. |
| 48 | S&F in repair vitreous china wash hand basin (flate back or angle back type) coloured of bowl size 550mmx400mm including waste and waste pipe PVC 32mm dia to be fixed over marble slabs or iron brackets complete all as specified and directed. |
| 49 | Supply and fixing in repairs decorative shape type table top Vitreous china wash basin, white of,size 495mm x 395mm x 150mm mm including CP waste coupling full thread of suitable sie of wash basin and waste pipe ncluding fixing of central hole mixer complete all as specified & directed by Engineer-in-Charge.Note : fixing of wash basin on granite/any type of surface with adhesive or any type of material deemed to be included in rate quoted by contractor. |
| 50 | S&F in repairs 10 litres PVC low level flushing cistern syphonic action type with inlet ball valve float and push type handle including bracket, PVC 32mm dia flush pipe with coupling and fixed complete all as specified and directed. |
| 51 | S&F in repair PVC connection 15mm bore size with two nuts and washers of length 450mm complete all as specified and directed. |
| 52 | S&F in repair grating round 125 mm size of CP (minium weight 50gms), complete all as specified and directed. |
| 53 | S&F in repair 32mm bore corrugated PVC waste pipe complete |
| 54 | S&F in repair Chromium plated Soap Dish fixed with and incl CP screws all as specified and directed. |
| 55 | S&F in repair bib taps, fancy type, chromium plated, cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipe of 15mm bore complete all as specified & directed by Engr-in-Charge. |
| 56 | S&F in repairs 15mm bore Angle valve fancy type chromium plated ISI marked with crutch or butter fly handle high pressure screwed both ends for iron pipe or for union and fixed complete all as specified and directed. |
| 57 | S&F in repair pillar tap chromium plated fancy type Swan Neck with capstan heads screwed down high pressure with or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed. |
| 58 | S&F in repairs chromium plated shower rose 100 mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed. |
| 59 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 60 | Supply and fixing in repair CP 3-in-1 wall mixture with telephonic shower for 15 mm bore pipe, cast copper alloy chromium plated complete all as specified & directed by Engineer-in-Charge. |
| 61 | S&F in repair for peg set of 05 Pin Stainless Steel Grade, fancy type, superior quality and fixed with screws complete all as specified . |
| 62 | S&F in repair CP towel ring fixed with and including Chromium plated brass screws and cleats ( min wt 90 gms) complete all as specified and directed. |
| 63 | S & F in repair for Bathroom cabinet Mirror of size 450mmX350mm wall Mounted, Shape Rectangular fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 64 | Supply and fixing in repair in Art western white/ off white viterous china rimless single piece WC of Appx size 395 x 710 x 730 mm with UF soft close seat cover, hinges, dual flush cistern fitting, fixing accessories and accessories set, P/S trap, including provn of CP health faucet and its stand complete all as specified & directed by Engineer-in-Charge. |
| 65 | S&F beveled edge fancy mirror 5.5mm thick glass of size 600x450mm of selected quality with four holes and catch nut complete design/shape will be approved by Engineer-in-Charge complete all as specified and directed. |
| 66 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or labortory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed including sink coupling complete all as spd and directed |
| 67 | S&F in repair sinks made of stainless steel 1mm thick kitchen or labortory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including sink coupling complete all as spd and directed complete all as specified and directed. |
| 68 | S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed and incl CP screws all as specified and directed. |
| 69 | S&F in repairs stop valve concealed fancy type, long shank and cup (ISI marked) brass chromium plated with crutch or butterfly handle screwed both ends for iron pipe or for union bore pipe of 15mm dia. |
| 70 | S&F in repairs Chromium plated Jet suitable for pedestal pattern water closet with butterfly base and PVC connection pipe with CP brass check nut at one and suitable for 15mm bore pipe/fittings complete all as specified. |
| 71 | S&F in repairs Brass Chromium Plated Fancy type Swan Neck wash hand Basin Mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore complete all as specified and as directed |
| 72 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long |
| 73 | Supply & Fixing in repair Stainless steel Plate rack 1mm thick of size 900mm x 600 mm x 200mm deep with plate racks, spoon holders, shelves etc complete all as specified and directed. |
| 74 | Demolition of stone slabs, paver blocks and tiles of any description or thickness in floors/apron laid dry complete all as specified and directed. |
| 75 | M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillers, window-cills, cooking platforms and like fixed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.Note:- The rate included for making gas pipe holes 25mm dia with rounded holes and all open edges to be half rounded. |
| 76 | Rounding to edges of stone slabs, one edge,such as in steps,cooking platform and other similar situation |
| 77 | M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in copings, bed plates including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed |
| 78 | Taking down of old PVC wall lining, preparation of surface, S&F hollow PVC Wall lining 15-20 mm thick, fluted profile grooves and ridges and with tongue and groove interlocking arrangement with shell thickness 0.8mm to 1.5mm, density of 0.6 to 0.8g/cm3 and water absorption less than 1% consisting of printed colour PVC sheet inclusive of solvent and fixing at site as per specification complete all as directed by Engineer-in-Charge. NOTE: DESIGN/COLOUR OF PVC PANELLING WILL BE APPROVED BY ENGR IN CHARGE. |
| 79 | Dismantling/taking down of cast iron or unreinforced concrete or PVC soil waste and drain pipe 75mm or 100mm dia with all fittings complete all as specified and directed. |
| 80 | S&F, 110mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints as in repair, fixed to walls with sufficent number of Iron stack clamp or in trenches complete all as specified and directed. |
| 81 | Dismantling timber scantling inc old wooden trusses , purlins, rafter etc complete all as specified and directed. |
| 82 | M&L steel work in tublar trussed for post,purlins/rafters incl special shaped washers etc complete using ERW or induction butt welded tubes conferming to IS 1161-1979 gde St -240 incl purlines complete all as specified and directed. |
| 83 | M&L Prepainted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/cladding to walls, fixed with self taping screws and overlap with sufficient laps inc Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coveringscomplete all as specified and directed by Engineer-in-Charge. |
| 84 | M&L pre painted galvalume aluminum zinc coated GI based plain steel sheeting 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self taping screws inc Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 85 | Preparing the new steel surfaces of any description over 10cm width or girth priming with red oxide zinc crome and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 86 | S&F of 75mm PVC (SWR) drain pipes 75 mm bore single socketed in any length with rubber ring joint fixed to walls complete all as specified and as directed. |
| 87 | S&F for 110mm bore pipes,PVC (SWR) bends any radius fitting fo PVC (SWR) pipes as in repair complete all as specified and directed. |
| 88 | S&F in replacement 75mm bore PVC floor trap with grating including jointing to waste pipe in cement concrete type B-1, 1:2:4, complete all as specified and directed. |
| 89 | M&L cutting chases, pinning in brick work for concealed water tubing and making good to facings where required and pointed in cement mortar 1:3 cutting not exceeding 10cm girth all as specified. |
| 90 | S & F in repair 25mm outer dia stainless steel bright finished ,fancy type decorative drapery rod of thickness 20 gauge fixed to wall with screws ,PVC gully including all necessary fixing arrangement including taking down old curtain rod complete all as specified |
| 91 | S&F in repairs stainless steel bright finished ,fancy type decorative brackets fixed with PVC plug/gutty & screws etc complete all as specified . |
| 92 | S&F in repairs stainless steel bright finished ,fancy type decorative end caps fixed complete all as specified . |
| 93 | Refixing of door shutters in same opening of any description exc 1 sqm but not exc 2 sqm each complete all as specified and directed. |
| 94 | Material and labour for complete removal of existing treatment internally surface of wall and applying min 1.0 mm thick wall care putty on the surfaces and making surface smooth and applying one coat of primer (as per manufacturer’s recommendations) on the surfaces and applying two coats of distemper oil emulsion without any brush marks on the surface in any tint including necessary scaffolding up to four storeys height of bldgs if required ,,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and as directed. |
| 95 | Preparation of old plastered or unplastered surfaces of walls including cornices pilasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc and applying two coat of oil bound distemper on walls all as specified and directed |
| 96 | Preparation of old plastered or unplastered surfaces of ceiling including cornices pilasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc and applying one coat of oil bound distemper on ceiling complete all as specified and directed |
| 97 | Supply and fixing in repair for coloured vertical /Horizontal venetian blinds roll of any type having minimum width of strip 75mm complete with machine and all accessories fix to wall with screw all as specified and directed Sample Approved By Engr-In-Chge. |
| 98 | M&L for PCC Type C2, 1:3:6 (40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 99 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each incl taking out hold fast. |
| 100 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each all as specified. |
| 101 | Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each all as specified. |
| 102 | Supply and fixing Factory made window/Ventilator 1.25mm thick box type(primer coated)ERW hollow P section of size 60mmx25mm including grill using 10 sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bar of T Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T Section of size 60mmx25mm and 1.25mm thick including cutting holes and good dismantled portion in PCC(1:2:4) type B1 four Nos for each window including following fitting welded to frame shutter :(a) Hold fast,150mm long of 12mmx3mm made to shape O4 Nos per window (b) handle of Z Sec20mmx25mm, 100mm long-per No leaf (c) MS Tower bolt 150mm long-02No per leaf .(d) Z section 20mmx25mm, 100mm long stopper 1 No per leaf. (e) cleat 55mm long of hollow square 15mmx20mmx63mm welded to hinge. 1 No per leaf (f) MS Pintal hinges of size 75mmx12mm. 2 Nos per leaf, including Stainless steel wire cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with alluminium wire staples and glass pane 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint complete. Make/ Manufacture by 1. M/sTee Pee Amritsar 2. M/s Mahindra Fabricators Hayal Pathankot 3. M/S Dhiman Industries, Mamun: NOTE:- During Fixing of Window, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement. NOTE:- During Fixing of Ventilator, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile etc and as per site requirement. Please Enable Macros to View BoQ information |
