|
| 1 | Excavating over areas, n exc 1.5 m deep and getting out any type of soil complete all as specified and as directed. |
| 2 | M&L for Corrosion resistant TMT bars of grade Fe-500 of bars 10 mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with mild steel wire annealed not less than 0.9 mm dia or securing with clips complete all as specified and as directed. |
| 3 | All as per item No.2 here-in-before but 5 to 10 mm dia in stirrups/ spacers and binders complete all as specified and as directed. |
| 4 | M&L for Form work to side of foundation, plinth beams etc complete all as specified and as directed. |
| 5 | S&F 3000 litre capacity FRP/SMC (Fiber Reinforced Plastic / Sheet Moulding Compound) water storage tank, cylindrical/rectangular, food-grade, UV-resistant, including testing complete all as specified and directed by Engr -in -charge |
| 6 | M&L RCC M-25 design mix (using 20 mm graded aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 7 | M&L for cement concrete type D2, 1:4:8 (using 40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and as directed. |
| 8 | Demolition of cement concrete above ground floor n.exe 15cm thickness(below or above ground level) complete all as specified and as directed. |
| 9 | Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water complete all as specified and as directed. (Upto 4 storey) |
| 10 | M&L for 20mm thick (in two layer) plastering on fair faces of Brick surface with CM (1:4) mixed with WPC finish surface even and smooth with out using extra cement complete all as specified and directed.(Upto 4th storey) |
| 11 | S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 12 | M&L for preparing of new steel surfaces of any description & applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and as directed.(upto 4th storey bldg) |
| 13 | M&L for preparing of old steel surfaces & applying applone Coats of Synthetic Enamel Paint over one coat of primer to steel and iron surfaces of any description, not otherwise described including preparation of old surface complete all as specified and directed.(upto 4th storey bldg) |
| 14 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over 2mm thick wall care putty and icluding priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. (upto 4 stoey bldg) |
| 15 | Returning filling including spreading levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed. |
| 16 | Removing excavated surplus soil to a distance exc 1.5 km and n. exc 5.0 km and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified & directed. |
| 17 | Supply, installation, testing and commissioning of Factory made FRP Septic tank of size approx. 2400 mm dia × 7000 mm length, minimum 3 chambers,complete with inlet & outlet, manhole covers, vent pipe, internal baffles, PCC bedding, excavation, backfilling and all connected accessories, complete all as specified and directed by Engr-in- charge. |
| 18 | Supply, fabrication, installation, testing and commissioning of MS Bar Screen of 20 mm bar space (manual / fixed type) made of flats & angles, suitable for sewage inlet chamber, including frame, supports, anchoring in RCC, omplete all as specified and directed. |
| 19 | Supply, installation, testing and commissioning of raw sewage transfer pump set of capacity 8 m³/hr at 10 m head, centrifugal type, complete with 1 Working + 1 Standby pump, including suitable electric motors, common MS base frame, non-clog impeller, suction & delivery piping up to 1.5 m on each side, isolating valves, NRV, coupling, pressure gauge, starter panel with autoalternation, cabling up to starter, earthing, foundation bolts, grouting, painting and all connected accessories, complete all as specified and directed. |
| 20 | Supply, installation, testing and commissioning of Twin Lobe Air Blower of 3 HP capacity, suitable for delivering air at pressure 0.3 kg/cm², complete with 1 Working + 1 Standby blower, including three phase electric motors, common MS base frame, flexible connections, inlet air filter-silencer, pressure relief valve, non-return valve, pressure gauge, starter panel with auto changeover, foundation bolts, vibration pads, cabling up to starter, earthing, painting and all connected accessories, complete all as specified and directed.Make: Everest / A1 or approved equivalent. |
| 21 | Supply and laying of PVC pressure pipe Class 6 kg/cm², 50 mm / 100 mm dia, fixed to walls/ceiling including fittings, clamps, solvent cement jointing, cutting chases and making good, complete all as specified and directed. |
| 22 | Supply, filling, testing and commissioning of MBBR Bio Media made of Polypropylene (PP), size approx. 23 mm dia, specific surface area not less than 500 m²/m³, suitable for sewage treatment in aeration tank, including loading, cleaning, testing, complete all as specified and directed by Engr-in- charge. |
| 23 | Supply, installation, testing and commissioning of chlorine dosing system comprising of electronic diaphragm dosing pump of capacity 0–4 LPH and solution preparation tank of 100 litres capacity, including suction & delivery piping, foot valve, injection quill, non-return valve, calibration column,panel, cabling up to starter, earthing, foundation arrangement and all connected accessories, complete all as specified and directed |
| 24 | Supply, installation, testing and commissioning of submersible sludge recirculation pump of capacity 3 m³/hr with 0.5 HP motor, suitable for continuous duty in sewage environment, including guide rail arrangement or fixed installation, delivery piping up to 1.5 m, non-return valve, isolating valve, float switch (if required), starter panel, cabling up to starter, earthing, foundation arrangement and all connected accessories, complete all as specified and directed. |
| 25 | Supply, installation, testing and commissioning of submersible filter feed pump of capacity 3 m³/hr with 0.5 HP motor, complete with 2 Nos. pumps (1 Working + 1 Standby), including delivery piping up to 1.5 m from pump, non-return valve, isolating valve, starter panel with auto changeover, cabling up to starter, earthing, lifting chain/guide arrangement and all connected accessories, complete all as specified and directed. |
| 26 | Supply, installation, testing and commissioning of FRP Pressure Sand Filter of size 600 mm dia × 1830 mm height (HOS), complete with internal lateral distribution system, graded quartz filter media, initial gravel packing, multiportvalve, pressure gauge, isolation valves, interconnecting UPVC piping, backwash arrangement, foundation base, making all connections, testing and commissioning, complete all as specified and directed. |
| 27 | Supply, installation, testing and commissioning of FRP Activated Carbon Filter of size 600 mm dia × 1830 mm height (HOS), complete with internal lateral system, activated carbon media, graded gravel support bed, multiport valve, pressure gauge, isolation valves, interconnecting UPVC piping, backwash arrangement, foundation base, making all connections, testing and commissioning, complete all as specified and directed. |
| 28 | Supply, installation, testing and commissioning of automatic control panel for STP, with timer-based operation, IP-55 protection, panel size approx. 700 × 600 × 450 mm, fabricated from CRCA sheet, powder coated, comprising MCB/MCCB, Al bus bars,contactors, Ammeter, Voltmeter, indication lamps, OLR,selector switches,starters,timer, terminal blocks, internal wiring,push start/stop botton etc complete with all accessories, fixing on wall/floor, testing and commissioning, complete all as specified and directed by Engr-in- charge.. |
| 29 | Supply, installation, testing and commissioning of basket type centrifuge for sludge dewatering of 400 mm basket diameter, fabricated in stainless steel, complete with electric motor, belt drive/direct coupled system, vibrationisolation pads, sludge feed arrangement, cake discharge arrangement, filtrate drain piping, control panel with safety interlocks, cabling up to starter, earthing, foundation bolts, grouting and all connected accessories, complete all as specified and directed. |
| 30 | Earth work in excavation (All Kind of Soil ) by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in-charge. |
| 31 | Supply and laying in trenches or fixing or passing through pipes or fixed to wall/pole 1100 volts grade XLPE insulated armoured heavy duty electric cables (conforming to IS 7098 (Part- I)with aluminium conductor of cross sectional area 25 Sqmm 3.5 core including connection cable glands, aluminium lugs etc complete all as specified and as directed. |
| 32 | Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1 with flat, size 250mm x 150mm x 40mm complete specified and directed. |
| 33 | M&L for sand filling for cable cushioning including spreading and levelling as directed. Note :- Thickness for sand shall be measured after punning down. |
| 34 | Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised strip of size 25 x 4 mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed by the Engr-in-Charge. Please Enable Macros to View BoQ information |
